示波器输入电容对上限截止频率测量的影响

单管放大电路是模拟电路中的一个经典实验。通过这个实验,学生可以更好地掌握静态工作点的调整和测试方法,并通过测量放大电路的主要性能指标,体会静态工作点对动态特性的影响。实验电路的上限截止频率仿真值和实测值存在较大差异,本文针对这个问题进行了详细的分析,指出示波器的输入电容是引起差异的主要原因,并进一步讨论了可有的改进测试方法。     

致密金属零件的激光近形制造

介绍了激光近形制造系统的组成,分析了该技术的特点和应用场合,指出了目前存在的问题和解决办法.     

Integrity of sulfur concrete subjected to simulated lunar temperature cycles

In view of potential application as a construction material on the lunar surface the mechanical integrity of sulfur concrete was evaluated after being subjected to simulated temperature cycles. Here, small cubes of sulfur concrete were repeatedly cycled between room (20 °C) and liquid nitrogen (−191 °C) temperatures after which they, and non-cycled cubes, were evaluated by compression testing. The compression strength of the non-cycled samples averaged ∼35 MPa (5076 psi) before failing whereas the cycled samples fractured at about 7 MPa (1015 psi). Microscopic examination of the fracture surfaces from the cycled samples showed clear de-bonding of the sulfur from the aggregate whereas it was seen adhering in those non-cycled. Based on a simple analysis it was concluded that the large strength discrepancy between cycled and non-cycled samples is due to differences between the coefficients of thermal expansion of the materials constituting the concrete.     

Numerical prediction and wind tunnel experiment for a pitching unmanned combat air vehicle

The low-speed flowfield for a generic unmanned combat air vehicle (UCAV) is investigated both experimentally and numerically. A wind tunnel experiment was conducted with the Boeing 1301 UCAV at a variety of angles of attack up to 70 degrees, both statically and with various frequencies of pitch oscillation (0.5, 1.0, and 2.0 Hz). In addition, pitching was performed about three longitudinal locations on the configuration (the nose, 35% MAC, and the tail). Solutions to the unsteady, laminar, compressible Navier–Stokes equations were obtained on an unstructured mesh to match results from the static and dynamic experiments. The computational results are compared with experimental results for both static and pitching cases. Details about the flowfield, including vortex formation and interaction, are shown and discussed, including the non-linear aerodynamic characteristics of the vehicle.     

一种新型二元风洞侧壁干扰修正方法——当地修正法

针对现行总体型二元风洞侧壁干扰修正方法的不合理性，本文发展了一种新型修正方法——当地修正法，并就有关问题做了讨论。与目前的总体型方法相比，当地修正法致力于对模型当地流动参数的修正，而不是笼统地去调整试验条件。当地修正法有能力处理那些主要的侧壁边界层效应及相关问题，是未来开展侧壁干扰修正的一条有效途径。     

基于BMU/LVDS总线的闭环总检查测试技术研究

为了更好地满足控制系统总检查测试的有效性和覆盖性要求,本文提出了火箭控制系统总检查的闭环测试方案。同时,新一代运载火箭所采用的总线监控单元BMU和箭地高速串行总线LVDS等新技术使方案的实现成为了可能。本文先介绍和论述了方案提出的必要性、原理以及实现的技术支持;接着提出了几点闭环实现的设计思路;最后在某型号火箭控制系统综合实验的基础上搭建了闭环测试平台,对惯组的有效性以及迭代制导算法的适应性进行了系统级的验证,实验表明方案能够很好地满足地面测试的有效性和覆盖性。     

AFDX交换机测试分析系统设计

AFDX网络由端系统、交换机和传输链路组成,交换机是AFDX网络的中枢构件。本文首先研究了AFDX交换机的功能和性能,在此基础上,设计了AFDX交换机测试分析系统,测试软件基于多框架、多视图、单文档,采用面向对象技术实现了交换机配置文件的处理、数据帧的捕获和解析、VL转发特征测试、技术时延测试、流量管制测试等一系列功能。最后进行了测试分析试验,试验展示了该测试分析系统对于AFDX交换机的测试效果。     

波音737—200／300／500飞机尾部结构疲劳裂纹的探伤检查

波音系列飞机一定时间后，飞机尾部结构出现疲劳裂纹，需用涡轮检测法进行损伤检查。     

飞机飞行航迹测试数据转换软件

:通过对飞机飞行航迹测试仪功能的分析 ,确定了测试数据转换成航迹相对于跑道中心实际坐标的基本原理 ,在此基础上编制了相应的软件。     

语言测试及设计

在外语教学中，语言测试是不可缺少的环节之一。本文主要论述语言测试理论，如语言测试的目的、语言测试的类型、语言测试的标准；分析并总结了常见的语言测试项目的设计方法，如：多项选择题的设计、词汇测试的设计、完形测试的设计、阅读理解的设计、听力测试的设计、写作测试的设计；并对测试后得分的计算和分析进行解释。最后提出语言教师了解一点语言测试的知识是很有必要的。