Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

Microstructure and Martensitic Transformation Behaviors of Explosively Welded NiTi/NiTi Laminates

The study is a first attempt to prepare bulk NiTi/NiTi shape memory alloy (SMA) laminates with a macroscopic heterogeneous composition by explosive welding and investigate their microstructures and martensitic transformation behaviors. After explosive weld- ing, a perfect interfacial bonding between the two components and a reversible martensitic transformation are realized in the tandem. Results show achievement of a fine granular structure and the maximum value of microhardness near the welding interface because of the excessive cold plastic deformation and the high impact velocity during the explosive welding. Meanwhile, the effects of aging on the transformation of the welded tandem are investigated by differential scanning calorimeter (DSC) and subject to discussion. The trans- formation temperatures of NiTi/NiTi SMAs increase with the rise of the aging temperature. The experimental results indicate the shape memory properties of NiTi/NiTi SMA fabricated by explosive welding can be improved by optimizing the aging technology.     

Flight Flutter Modal Parameters Identification with Atmospheric Turbulence Excitation Based on Wavelet Transformation

针对基于大气紊流激励的飞机颤振试验数据具有信噪比低以及测量数据以加速度响应形式给出等特点,将小波变换与随机减量法相结合对飞机颤振模态参数进行识别,首先利用随机减量法获得结构在非零初始加速度条件下的自由衰减响应,然后对该自由衰减响应进行Morlet连续小波变换,为使变换简单,本文采用了Parseval定理和留数定理,利用Morlet的带通滤波特性,通过搜索小波变换系数在不同的尺度区域内的极大值,再根据小波变换系数的极大值、相角与固有振动频率及阻尼系数间的关系,即可识别出各模态参数。并对利用小波变换识别颤振模态参数时,实现模态解耦应满足的条件进行了分析研究。通过仿真和飞机颤振试验数据分析,验证了该识别方法不仅简单、有效和可行,而且具有较强的抗噪性。     

航空发动机双转子系统的拍振分析

 在双转子航空发动机中,由于转子系统不可避免地存在不平衡量,当两个转子的转速比较接近时,发动机会出现拍振现象,拍振将引起振动强度过大问题。对双转子系统的拍振进行了研究,分析了拍振的周期性、信号强度及其反向转子特性,阐明了拍振产生的机理和特征,并采用数值仿真和试验对拍振进行了定量分析和验证。研究表明,拍振与双转子转速差和不平衡量的相位因素有关,当转速差小于工作转速的20%时,双转子系统拍振信号的强度较大。     

月球着陆器精确定点及安全着陆技术研究

在未来月球探测中,需要对一些地形复杂的区域进行探测,而在这些区域软着陆,潜在的危险性增加,这就要求着陆时具有较高的定位精度并能够自动避险。当前,由于着陆时定点的误差较大,在小范围安全地域准确着陆很难。研究了一种精确定位、安全的软着陆方式,它在软着陆过程中增加了悬停阶段。在这一阶段中,通过着陆区危险地域的识别、着陆地点位置误差的计算,加上对着陆器横向漂移的控制技术,使着陆地点的精度以及着陆生存率大为提高,能够满足未来月球探测的软着陆要求。     

高温相变单元管蓄热过程数值模拟

对以高温共晶盐 Li F-Ca F2 为相变材料 (PCM)和以干空气为工质的相变蓄热系统 ,采用焓方法建立了以控制体单元为对象的单管相变蓄热模型。在模拟空间站太阳能吸热 /储热器轨道运行参数下进行了数值计算。计算结果与地面模拟试验数据进行了比较 ,吻合良好。     

GPS姿态测量的载波相位整周模糊度快速解算

 根据 ARCE方法可以将模糊度搜索空间从所观测到的 m颗卫星的 m -1维降为 3维独立整周模糊度搜索空间,结合整数高斯变换及基线长度约束减小模糊度搜索空间,利用 Cholesky分解提高模糊度搜索效率,实验结果证明该方法能够快速解算整周模糊度适于实时姿态确定等应用。     

基于相位变化率的无源定位法

无源定位技术有着广阔的应用前景，本文在现有单站无源定位方法的基础上，介绍了相位变化率定位法。该方法利用观测平台上两个相互正交的相位干涉仪接收目标辐射电磁波的相位获取目标的方向信息，利用对应的相位变化率获取目标的径向距离信息，从而实现对目标的实时高精度定位。文中还给出了观测平台飞行姿态变化情况下的定位表达式。仿真结果表明，该方法是一种发展前途较好的单站无源定位方法。     

高过载条件下绝热层烧蚀实验方法研究 (Ⅰ)方案论证及数值模拟

分析了高过载对固体火箭发动机流场和绝热层烧蚀的影响规律，提出一种新的研究思路：采用数值模拟方法来预示发动机三维两相流场，建立高过载流场模拟实验装置，开展绝热层烧蚀实验，建立高过载条件下的绝热层烧蚀模型，在此基础上发展高过载发动机绝热层设计和烧蚀预示方法。其中关键技术是高过载流场的模拟，对粒子加入法和弯管分离法两种方案进行了论证，认为弯管分离法原理上是可行的。为了验证这种方案的可行性，开展了弯管通道两相流的数值模拟研究，计算结果表明弯管装置具有使凝相粒子聚集形成高浓度粒子流的功能。     

二维定常亚音速无旋气流绕物体的流动

本文采用小扰动法给出了定常亚音速无旋气流绕物体流动的解析解,同时也给出了一个将单位圆域保角映射成一个任意封闭翼型的简单计算公式。此外还导出了压强系数的新的近似表达式。在流过鼓包的流动问题上,它与由Kaplan提出的精确解析结果相比,二者极为符合。