MPC8270的MCP异常研究与分析

MPC8270处理器以其良好的性能和丰富的接口在航空机弹载嵌入式领域有广泛的应用.MPC8270提供丰富的异常机制供软件开发者使用,由于MCP的产生与硬件有紧密关系,并不会由于软件本身导致,因此往往软件开发者对其并不在意.结合在实际工作中碰到的故障事例,对MCP进行了详细的描述.对MCP正确的处理可以增加软件的可靠性.     

Optimal motion cueing algorithm for accelerating phase of manned spacecraft in human centrifuge

This paper presents a novel optimal Motion Cueing Algorithm (MCA) to control the rotations of a Human Centrifuge (HC) and achieve the best simulation of a SpaceCraft (SC) motion. Relations of the specific forces sensed by astronauts of the SC and the HC have been derived and linearized. A Linear Quadratic Regulator (LQR) controller is implemented for the problem which tends to minimize the error between the two sensed specific forces as well as control input in a cost function. It results in control inputs of the HC to generate its sensed specific force as close as possible to the one in the SC. The algorithm is implemented for both linearized and nonlinear portions of a US space shuttle mission trajectory as a verification using MATLAB. In longitudinal direction, the proposed MCA, works well when the acceleration is less than 2g in which the tracking error does not exceed 12%. In lateral direction the tracking is much better even in nonlinear region since the error remains less than 7% for tilting up to 50°. Finally, the effect of weight matrixes in the LQR cost function on overall weight and power of the HC motion system is discussed.     

基于滑模控制的剖面跟踪制导律

针对高超声速飞行器滑翔段的高精度制导问题，考虑复杂多约束条件以及干扰和不确定因素的影响，设计了一种基于全局积分滑模控制的剖面跟踪制导方法。首先，将多重约束转化为阻力加速度-速度（D-V）平面内的再入走廊；然后，以终端精度和总吸热量为性能指标，采用分段函数的形式优化设计出一条标准D-V剖面；再基于简化的动力学模型，推导得到关于阻力加速度微分和速度的二阶非线性模型；最后，基于滑模控制理论，设计全局积分滑模面和指数趋近律，获得控制量幅值大小，并结合侧向方位误差走廊确定控制量符号，从而实现对标准剖面的有效跟踪。采用CAV-H滑翔再入模型进行数值仿真，分析验证了提出的基于滑模控制的剖面跟踪制导律具有较好的跟踪性能和精度。     

Performance analysis of PPP ambiguity resolution with UPD products estimated from different scales of reference station networks

Integer ambiguity fixing with uncalibrated phase delay (UPD) products can significantly shorten the initialization time and improve the accuracy of precise point positioning (PPP). Since the tracking arcs of satellites and the behavior of atmospheric biases can be very different for the reference networks with different scales, the qualities of corresponding UPD products may be also various. The purpose of this paper is to comparatively investigate the influence of different scales of reference station networks on UPD estimation and user ambiguity resolution. Three reference station networks with global, wide-area and local scales are used to compute the UPD products and analyze their impact on the PPP-AR. The time-to-first-fix, the unfix rate and the incorrect fix rate of PPP-AR are analyzed. Moreover, in order to further shorten the convergence time for obtaining precise positioning, a modified partial ambiguity resolution (PAR) and corresponding validation strategy are presented. In this PAR method, the ambiguity subset is determined by removing the ambiguity one by one in the order of ascending elevations. Besides, for static positioning mode, a coordinate validation strategy is employed to enhance the reliability of the fixed coordinate. The experiment results show that UPD products computed by smaller station network are more accurate and lead to a better coordinate solution; the PAR method used in this paper can shorten the convergence time and the coordinate validation strategy can improve the availability of high precision positioning.     

结合TEC的泵驱两相温控系统的空间应用

为满足天舟一号货运飞船(T Z1)蒸发冷凝科学实验的控温需求，采用半导体制冷片(TEC)和泵驱两相回路结合的控温系统实现了冷凝台-5~40 ℃(±0.2 ℃)的控温要求。对TEC和平行流换热器进行了研究，结果表明该系统能够满足环境温度等于30 ℃工况下的制冷和散热要求。测试结果表明，平行流换热器在地面和在轨的换热相当，说明重力的影响几乎可以忽略。     

大跨距双站交会角的单站观测

在简述短基线相差测距和测角的基础上,利用正弦定理可给出两种大跨距双站交会角的单站测算方法,一种直接利用单站测距,另一种利用虚拟站点处对目标的虚拟测距。误差分析表明,采用虚拟测距的方法能有效提高单站虚拟测角的精度。     

一种矢量调制移相器的反馈补偿设计方法

针对矢量调制移相器存在的移相误差和增益波动问题,提出一种矢量调制移相器的反馈补偿设计方法.在分析了矢量调制的移相原理及影响移相精度和增益稳定性的误差因素的基础上,根据反馈补偿原理对误差因素进行补偿校正.首先通过自动化的测试和处理流程,得到移相器的相位和增益误差特性表,然后将该误差特性表反馈至移相器监控单元,最后监控单元利用插值算法和归一化原理实现对误差量的补偿校正.对采用该方法设计的移相器进行实际测试,结果表明：其移相精度小于1°,增益随相位变化波动小于0.4 dB,对比补偿校正之前,移相精度和增益稳定性得到了大幅提高和改善,从而验证了该方法的有效性.     

基于样条拟合和双向滤波的助推段弹道估计

三次B样条拟合在助推段弹道估计中应用广泛,但存在弹道两端点邻域估计误差过大的问题.通过对B样条基函数矩阵的特性进行分析,发现其原因为端点邻域估计时能利用的有效观测数据最少.因此,提出一种基于样条拟合和双向滤波相结合的弹道估计策略：首先将双星观测数据利用无迹变换转换为等效位置观测;然后利用三次B样条拟合弹道;最后基于一种自适应卡尔曼滤波器,采用双向滤波策略改善样条拟合的端点估计精度.仿真结果表明：组合方法使样条拟合的端点估计误差减少40％,同时使估计弹道更平滑.此结果满足实时性要求.     

调相白噪声对频率传递短期稳定度的影响分析

详细分析了调相白噪声对频率稳定度的影响。经过理论分析,得出了频率传递系统信噪比的开方与稳定度成正比,调制信号频率与稳定度成正比。经过分析得到,在一定范围内,提高激光器光功率可以提高频标传递的稳定度;调制频率和传递系统信噪比是影响短期稳定度的两个重要因素;通过增加EDFA的方法不能提高传递系统短期稳定度,反而每增加4到5个EDFA,稳定度下降1个数量级。     

圆顶相控阵的初步设计

文章介络了圆顶阵的概念、实现宽角扫描的原理;利用几何光学法分析了圆弧阵的口径场幅度、固定移相器的相移;同时,给出了圆顶单元的几种设计方法。最后,对文中推导出的重要公式进行了验证,并从中找到适合工程实现的设计参数：结果表明,几何光学法是分析圆顶相控阵极其有效的方法,圆波导是圆顶单元比较好的选择,圆顶相控阵在实现宽角扫描方面具有成熟的理论依据。