一种基于实数域特征值分解的前后向平滑算法

为减小算法的运算量,对常规前后向空间平滑(FBSS)算法进行改进,提出了一种基于实数域特征值分解的前后向平滑(RDFBSS)算法。算法根据前后向平滑算法协方差矩阵的中心-厄米特对称特点,通过实值化变换,使FBSS算法的特征值分解从复数域转为实数域,大幅减少了算法的运算量,且不影响解相干和统计性能,提高了实用性。仿真结果证实了算法的有效性。     

战斗机敏捷性管理系统

阐述了设计敏捷性管理系统的必要性,介绍了传统大迎角限制器,分析了其存在的不足,在基础上,介绍了国外关于敏捷性管理 研究情况,包括敏捷性管理系统的基本概念,管理模式,设计中应注意的问题,分析结果表明,敏捷性管理系统有助于提高飞机的作战效能并可减轻驾驶员的负担。     

Assessing the feasibility of involving gaseous products resulting from physicochemical oxidation of human liquid and solid wastes in the cycling of a bio-technical life support system

The study addresses the possible ways of involving gaseous products produced by “wet” incineration of human wastes mixed with H₂O₂ in an alternating electric field in the cycling of the physical model of a bio-technical life support system (BTLSS). The resulting gas mixture contains CO₂ and O₂, which are easily involved in the cycling in the closed ecosystem, and NH₃, which is unacceptable in the atmosphere of the BTLSS. NH₃ fixation has been proposed, which is followed by nitrification and involvement of the resulting products in the mass exchange of the closed system. Experiments have been performed to show that plants can be grown in the atmosphere resulting from the closing of the gas loop that includes a physicochemical installation and a growth chamber with plants representing the phototrophic compartment of the BTLSS. The results of the study suggest the conclusion that the proposed method of organic waste oxidation can be a useful tool in creating a physical model of a closed-loop integrated BTLSS.     

中低纬度Pc3-4地磁脉动特性研究——子午工程数据分析初步结果

利用新建成的子午工程地磁台站数据,对比分析了地磁平静期间(2011年3月20-27日)和磁暴期间(2011年9月25日至10月1日)Pc3-4地磁脉动的时空分布特征及其对行星际条件的响应.数据分析结果表明,中低纬度(1.3<L<2.3,L为磁壳参数)的Pc3-4地磁脉动在这两个时期内的分布存在明显的晨昏不对称性,在昼侧前出现明显的Pc3-4地磁脉动并与行星际上游波动密切相关,其振幅增强可能与太阳风动压脉冲相关,高速太阳风更易导致Pc3-4地磁脉动;而对于近赤道低纬(L<1.3)区域,无论是在地磁平静期还是磁暴期均未能观测到Pc3-4地磁脉动,Pc3-4地磁脉动存在明显的纬度效应.     

HB-2 high-velocity correlation model at high angles of attack in supersonic wind tunnel tests

Responding to a need for experimental data on a standard wind tunnel model at high angles of attack in the supersonic speed range, and in the absence of suitable reference data, a series of tests of two HB-2 standard models of different sizes was performed in the T-38 trisonic wind tunnel of Vojnotehnickˇi Institut(VTI), in the Mach number range 1.5–4.0, at angles of attack up to+30°. Tests were performed at relatively high Reynolds numbers of 2.2 millions to 4.5 millions(based on model forebody diameter). Results were compared with available low angle of attack data from other facilities, and, as a good agreement was found, it was assumed that, by implication, the obtained high angle of attack results were valid as well. Therefore, the results can be used as a reference database for the HB-2 model at high angles of attack in the supersonic speed range, which was not available before. The results are presented in comparison with available reference data, but also contain data for some Mach numbers not given in other publications.     

液相色谱仪故障分析与处理

简述了液相色谱仪工作原理，对常见故障进行了分析，并给出了处理方法。     

吸附式风扇叶栅流场数值模拟

针对某型高性能风扇第2级转子叶片,采用NUMECA商业软件数值模拟的方法,分析了在叶片吸力面距前缘50％和75％弦长处采用吸气技术前后叶栅总压系数、气流转折角和静压升等方面的变化情况.结果表明:在相同攻角相同Ma下,叶栅总压损失随吸气量的增加逐渐降低;叶栅气流转折角随吸气量的增加逐渐交大;叶栅静压升随吸气量的增加逐渐提高;在6°攻角下,在不同Ma下进行吸气,叶栅总压损失都有所降低.     

Investigation on the Thermal Conductivity of 3-Dimensional and 4-Directional Braided Composites

It is vital to choose a factual and reasonable micro-structural model of braided composites for improving the calculating precision of thermal property of 3-D braided composites by finite element method (FEM). On the basis of new microstructure model of braided composites proposed recently, the model of FEM calculation for thermal conductivity of 3-dimennsional and 4-directional braided composites is set up in this paper. The curves of coefficient of effective thermal conductivity versus fiber volume ratio and interior braiding angle are obtained. Furthermore, comparing the results of FEM with the available experimental data,the reasonability and veracity of calculation are confirmed at the same time.     

相位信息在故障诊断中的应用

 在故障诊断中,人们多从频域中寻找特征,但对于转子系统,许多故障的特征是相似的。相位作为旋转机械里一个很实用的量,在故障诊断中一直没有得到很好的应用,本文指出的相位计算和测量概念和方法,旨在进一步识别故障。     

基于FM-AM转换的伪码调相-载波调频复合引信信号的脉内特征提取研究

伪码调相和载波调频复合信号因具有好的距离、速度分辨率和测速测距精度,所以广泛应用在雷达和引信中。在电子对抗中为了实施欺骗性干扰,必须有效地提取复合信号的参数特征,为此本文研究了FM-AM转换时频分析的理论及其实现方法,并利用该方法对伪码调相-载波调频复合信号进行了脉内特征分析。具体包括伪码调相正弦载波信号、伪码调相复合正弦调频信号及伪码调相复合线性调频信号。仿真结果表明,在信噪比为5dB时,利用FM-AM转换时频分析技术,不但可以提取载波调频的特征信息,而且能够有效提取伪码的特征信息。