薄壁结构的高效铣削加工

介绍了国内外关于薄壁结构的高效铣削加工技术研究状况,并对其中一些问题进行了分析、探讨。     

氮气介质下钛合金铣削特性的分析研究

提出了用氮气作为切削介质的绿色加工技术,并通过试验设计,分别在干切削和以氮气为介质的切削条件下,对铣削钛合金的铣削力及刀具的后刀面磨损进行了分析研究,最后对试验结果进行了讨论。     

用四坐标数控铣床加工整体叶轮

介绍一种形成包络面(等距面)的实用方法,提出一种用四坐标数控铣床加工整体叶轮的程序计算方法。还介绍了刀具选择、叶轮装夹和干涉检查等内容。根据本文所述方法用四坐标数控铣床在国内首次加工出导弹涡喷发动机整体叶轮,各项指标均达到设计标准。     

Prediction of cutting forces in flank milling of parts with non-developable ruled surfaces

Predicting the cutting forces required for five-axis flank milling is a challenging task due to the difficulties involved in determining the Undeformed Chip Thickness(UCT) and CutterWorkpiece Engagement(CWE). To solve these problems, this paper presents a new mechanistic cutting force model based on the geometrical analysis of a flank milling process. In the model,the part feature and corresponding cutting location data are taken as input information. The UCT considering cutter runout is calculated according to the instantaneous feed rate of the element cutting edges. A solid-discrete-based method is used to precisely and efficiently identify the CWE between the end mill and the surface being machined. Then, after calibrating the specific force coef-ficients, the mechanistic milling force can be obtained. During the validation process, two practical operations, three-axis flank milling of a vertical surface and five-axis flank milling of a nondevelopable ruled surface, are conducted. Comparisons between predicted and measured cutting forces demonstrate the reliability of the proposed cutting force model.     

GFRP铣槽加工铣削力及表面粗糙度研究

铣槽是复合材料较常用的机械加工形式之一。为研究玻璃纤维增强复合材料(Glass Fiber Reinforced Plastic,GFRP)铣槽加工中各加工参数对铣削力和表面粗糙度的影响,开展了以主轴转速、进给速度和轴向切深为因素的正交试验,研究铣削力和表面粗糙度的变化规律。并用Matlab软件对铣削力和表面粗糙度的试验数据进行回归分析,建立了铣削力和粗糙度的经验公式,最后通过试验验证铣削力和表面粗糙度经验公式的正确性。结果表明:轴向切深对铣削力影响最大,其次是主轴转速,进给速度对铣削力影响最小;主轴转速对粗糙度的影响最大,其次是进给速度,轴向切深对粗糙度的影响最小。试验结果与铣削力、表面粗糙度经验公式算得的数值对比,误差范围都在20%以内。     

通过铣削力或铣削扭矩监测铣刀破损的研究

为了通过铣削力或铣削扭矩波形的不均匀程度来识别铣刀是否发生破损,提出了两类识别方法。一类是计算齿周期峰值变化率;一类是计算相对最大切削厚度的偏心率。两类算法均简单、可靠,可用于各种铣削加工过程的铣刀破损监测。     

基于宏程序的外球面粗精加工

目前,小内存的数控机床仍然是我国机床的主流,使加工程序变得简洁,对实际加工有着很重要的意义。宏程序的应用可以大大简化编程,本文通过实例介绍了数控铣削加工外球面的宏程序。     

周边式对接机构对接捕获阶段的三体力元动力学模型

在空间交会对接过程中，从首次接触碰撞到完成捕获这一阶段称为对接捕获阶段，对对接捕获阶段动力学性态的研究是空间交会对接技术的关键，建立动力学模型进行仿真是研究的一个有效途径。以有内导向瓣异体同构周边式对接机构为研究对象，从机构的物理模型出发建立了对接捕获阶段的三体力元模型。该模型考虑了缓冲系统六个方向之间的耦合和缓冲系统中齿轮等转动部件惯量的影响。并在动力学仿真软件DADS的接口上开发相应的用户模块。在DADS平台上完成对接过程的动力学仿真。     

Ti6Al4V钛合金大进给铣削切削力与切削温度的试验研究

采用可转位涂层硬质合金刀具对Ti6Al4V钛合金进行了大进给铣削试验,研究分析了大进给铣削Ti6Al4V钛合金时每齿进给量、切削速度、轴向切深以及径向切深等切削参数对切削力和切削温度的影响。研究结果表明,随着每齿进给量和轴向切深的增加,切削力均呈现增大的趋势,而切削速度和径向切深对削力的影响并不明显;随着每齿进给量和切削速度的提高,切削温度亦呈现升高的趋势。     

Cutting force prediction for circular end milling process

A deduced cutting force prediction model for circular end milling process is presented in this paper. Traditional researches on cutting force model usually focus on linear milling process which does not meet other cutting conditions, especially for circular milling process. This paper presents an improved cutting force model for circular end milling process based on the typical linear milling force model. The curvature effects of tool path on chip thickness as well as entry and exit angles are analyzed, and the cutting force model of linear milling process is then corrected to fit circular end milling processes. Instantaneous cutting forces during circular end milling process are predicted according to the proposed model. The deduced cutting force model can be used for both linear and circular end milling processes. Finally, circular end milling experiments with constant and variable radial depth were carried out to verify the availability of the proposed method. Experiment results show that measured results and simulated results corresponds well with each other.