基于MOTOROLA D15手机模块的无线发送模块的设计

应用Motorola D15手机模块设计GPS系统中的无线发射部分，在硬件设计部分介绍了手机模块与微处理器的连接关系，而在软件部分介绍了AT指令、编码过程和发送过程。     

测控站点电磁兼容分析与预测技术研究

本文介绍了对测控站点内各测控设备的电磁干扰进行分析和预测的方法。系统采用干扰源与接收机逐对考虑的方式，极大简化了计算。并采用分阶段预测的方法，即分成：快速筛选、幅度筛选、频率筛选和详细预测四个阶段进行逐阶段分析和预测。     

飞机座舱有机玻璃钻（扩）孔工艺的研究

 以自然冷却无需使用压缩空气和冷却剂的一次钻（扩）孔,作为飞机座舱玻璃孔的工艺。孔的质量优于现行工艺的成品孔。钻（扩）孔后无需退火以消除加工应力。该工艺适用于定向和不定向有机玻璃,粘涤纶钢的有机玻璃组合件。     

发动机高速动平衡的振动相位分析

针对发动机转子高速动平衡转速波动、无法保证振动信号同步整周期采样的特点,提出了一种基于转速脉冲的振动信号重构技术,大大提高了相量测量的准确度和稳定性。经试验验证,这项技术是有效、可行的。     

Magnetosphere Imaging Instrument (MIMI) on the Cassini Mission to Saturn/Titan

The magnetospheric imaging instrument (MIMI) is a neutral and charged particle detection system on the Cassini orbiter spacecraft designed to perform both global imaging and in-situ measurements to study the overall configuration and dynamics of Saturn’s magnetosphere and its interactions with the solar wind, Saturn’s atmosphere, Titan, and the icy satellites. The processes responsible for Saturn’s aurora will be investigated; a search will be performed for substorms at Saturn; and the origins of magnetospheric hot plasmas will be determined. Further, the Jovian magnetosphere and Io torus will be imaged during Jupiter flyby. The investigative approach is twofold. (1) Perform remote sensing of the magnetospheric energetic (E > 7 keV) ion plasmas by detecting and imaging charge-exchange neutrals, created when magnetospheric ions capture electrons from ambient neutral gas. Such escaping neutrals were detected by the Voyager l spacecraft outside Saturn’s magnetosphere and can be used like photons to form images of the emitting regions, as has been demonstrated at Earth. (2) Determine through in-situ measurements the 3-D particle distribution functions including ion composition and charge states (E > 3 keV/e). The combination of in-situ measurements with global images, together with analysis and interpretation techniques that include direct “forward modeling’’ and deconvolution by tomography, is expected to yield a global assessment of magnetospheric structure and dynamics, including (a) magnetospheric ring currents and hot plasma populations, (b) magnetic field distortions, (c) electric field configuration, (d) particle injection boundaries associated with magnetic storms and substorms, and (e) the connection of the magnetosphere to ionospheric altitudes. Titan and its torus will stand out in energetic neutral images throughout the Cassini orbit, and thus serve as a continuous remote probe of ion flux variations near 20R _S (e.g., magnetopause crossings and substorm plasma injections). The Titan exosphere and its cometary interaction with magnetospheric plasmas will be imaged in detail on each flyby. The three principal sensors of MIMI consists of an ion and neutral camera (INCA), a charge–energy–mass-spectrometer (CHEMS) essentially identical to our instrument flown on the ISTP/Geotail spacecraft, and the low energy magnetospheric measurements system (LEMMS), an advanced design of one of our sensors flown on the Galileo spacecraft. The INCA head is a large geometry factor (G ∼ 2.4 cm² sr) foil time-of-flight (TOF) camera that separately registers the incident direction of either energetic neutral atoms (ENA) or ion species (≥5^∘ full width half maximum) over the range 7 keV/nuc < E < 3 MeV/nuc. CHEMS uses electrostatic deflection, TOF, and energy measurement to determine ion energy, charge state, mass, and 3-D anisotropy in the range 3 ≤ E ≤ 220 keV/e with good (∼0.05 cm² sr) sensitivity. LEMMS is a two-ended telescope that measures ions in the range 0.03 ≤ E ≤ 18 MeV and electrons 0.015 ≤ E≤ 0.884 MeV in the forward direction (G ∼ 0.02 cm² sr), while high energy electrons (0.1–5 MeV) and ions (1.6–160 MeV) are measured from the back direction (G ∼ 0.4 cm² sr). The latter are relevant to inner magnetosphere studies of diffusion processes and satellite microsignatures as well as cosmic ray albedo neutron decay (CRAND). Our analyses of Voyager energetic neutral particle and Lyman-α measurements show that INCA will provide statistically significant global magnetospheric images from a distance of ∼60 R _S every 2–3 h (every ∼10 min from ∼20 R _S). Moreover, during Titan flybys, INCA will provide images of the interaction of the Titan exosphere with the Saturn magnetosphere every 1.5 min. Time resolution for charged particle measurements can be < 0.1 s, which is more than adequate for microsignature studies. Data obtained during Venus-2 flyby and Earth swingby in June and August 1999, respectively, and Jupiter flyby in December 2000 to January 2001 show that the instrument is performing well, has made important and heretofore unobtainable measurements in interplanetary space at Jupiter, and will likely obtain high-quality data throughout each orbit of the Cassini mission at Saturn. Sample data from each of the three sensors during the August 18 Earth swingby are shown, including the first ENA image of part of the ring current obtained by an instrument specifically designed for this purpose. Similarily, measurements in cis-Jovian space include the first detailed charge state determination of Iogenic ions and several ENA images of that planet’s magnetosphere.This revised version was published online in July 2005 with a corrected cover date.     

多体运动理论与齿轮测量中心的几何误差建模

本文阐述了多体系统的拓扑结构和低序体阵列,其特征矩阵的基本概念和构建方法,分析了多体系统误差运动的基本规律,结合891E型齿轮测量中心研究了根据特征矩阵得到其空间几何误差的算法,为齿轮测量中心精度分析和几何误差提供了一种理想的建模方法.     

热防护系统高温纤维隔热毡传热及有效热导率分析

针对重复使用运载器热防护系统纤维隔热毡内部导热和辐射的耦合换热问题进行了分析,应用有限差分法建立了纤维隔热毡的数值分析模型.通过数值求解传热方程,计算了稳态的有效热导率.计算结果表明辐射和气体传导是纤维隔热毡内的主要传热方式,辐射作用随压力和试样密度的增加而降低,在试样温度高的一侧辐射是主要的传热方式,而在温度低的一侧气体传导为主要的传热方式;试样的有效热导率随纤维的平均直径、压力和温差的增加而增加,随试样密度的增加而降低.本文的计算结果与文献中的实验结果吻合较好,可以为纤维隔热毡及热防护系统的优化设计提供理论参考.     

基于VXI总线的检测软件设计

基于VXI总线和虚拟仪器技术，研制开发了用于外场的模拟式电子控制器检测软件，并对软件开发的过程和要求进行了分析，重点解决了程序设计中的需求分析和模块化设计问题。     

三轴稳定卫星无陀螺姿态确定算法研究

针对三轴稳定卫星进行了正常飞行模式下无陀螺姿态确定算法研究，采用磁强计、地球敏感器和太阳敏感器组合获得姿态数据，利用四元数法和高斯－马尔可夫过程建立了姿态确定估计器算法模型。通过数学仿真证明，此姿态确定算法能够对星体姿态进行较精确的估计或校正，满足卫星控制精度要求。     

应用声发射技术实时监测某型机防扭支架疲劳试验裂纹

随着声发射技术的发展,声发射技术在工程无损检测上的运用日益广泛。本文对声发射技术的应用现状、基本理论及在直升机某型机防扭支架疲劳试验裂纹监测中的应用进行了介绍。希望通过应用声发射技术,能及时捕捉疲劳裂纹形成和扩展的过程,给判定疲劳试验件是否破坏带来更准确、客观的依据,从而能为直升机动部件和结构件的准确定寿提供一种科学的辅助手段。