CMH模型中部分参数对磁滞回线形状影响的研究

研究了Complete Moving Hysteresis模型计算公式中部分参数对磁滞回线形状的影响 ,发现饱和磁化强度Ms 和移动参数α对回线形状的影响并不显著 ,但参量γ的影响却是明显的 ,随着γ值的增加 ,回线的斜率增加 ,突变性增强     

正态-复合非时齐Poisson过程模型结构可靠性当量正态设计

讨论强度R～N（μ_R，_R），应力｛S（t），t∈［0，T］｝为非时齐Poisson过程模型结构可靠性当量正态设计。获得应力在设计基准期［0，T］内的最大值概率分布及统计参数估计；正态－复合非时齐Poisson过程模型结构可靠度及结构可靠性当量正态设计表达式。     

月面上升的轨迹优化与参数分析

面向月球采样返回任务分析需求,对月面上升段的轨迹优化及燃料消耗影响因素进行了研究。基于上升器运动模型,建立以燃料消耗最优为目标考虑入轨约束的轨迹优化模型,通过Gauss伪谱法和序列二次规划求解上升过程最优推力方向。改变运动模型中的初始推重比、入轨约束中的目标轨道参数,根据轨迹优化结果得到对应的燃料消耗,分析了这些因素对上升器燃料消耗的影响。针对上升器非共面起飞的问题,提出了上升偏航、升交点调整、倾角调整3种方案,从燃料消耗的角度分析了各方案的适用情况,为未来工程应用提供参考。     

Experimental and numerical investigation on surface quality for two-point incremental sheet forming with interpolator

The unsatisfied surface quality seriously impedes the wide application of incremental sheet forming (ISF) in industrial field. As a novel approach, the interpolator method is a promising strategy to enhance the surface quality in ISF. However, the mechanism for the improvement of surface quality and the influence of interpolator properties on surface roughness are not well understood. In this paper, the influences of process variables (i.e. tool diameter, step size and thickness of interpolators) on the forming process (e.g. surface roughness, forming force and geometric error) are investigated through a systematic experimental approach of central composite design (CCD) in two-point incremental sheet forming (TPIF). It is obtained that the increase in thickness of interpolators decreases the surface roughness in direction vertical to the tool path while increases the surface roughness in direction horizontal to the tool path. Nevertheless, the combined influence between thickness of interpolators and process parameters (tool diameter and step size) is limited. Meanwhile, the placement of interpolator has little influence on the effective forming force of blank. In addition, the geometric error enlarges with the increase of step size and thickness of interpolator while decreases firstly and then increase with an increase in tool diameter. Finally, the influencing mechanism of the interpolator method on surface quality can be attributed to the decrease of the contact pressure due to the increase of contact area with the unchanged contact force. Meanwhile, the interpolator method eliminates the sliding friction on the surface of blank due to the stable relative position between the blank and the interpolator.     

面向空间天线的TWF复合材料性能研究

利用碳纤维三向编织物（triaxial woven fabric，TWF）作为增强材料，与柔性基体材料硅橡胶复合，制成兼具一定柔性和刚性的复合材料壳膜结构，用于卫星天线反射器，是一种新型的高精度可展开天线实现方案。采用复合材料细观方法，对碳纤维增强硅橡胶TWF复合材料进行了力学性能的研究。首先由纤维和基体的材料特性得到均质纤维束的材料特性；接下来考虑纤维束交织情况（起伏波动）建立由纤维束组成的单胞实体有限元模型；然后对单胞实体有限元模型进行均匀化分析，施加周期性边界条件，最终得到等效的均质材料特性；为满足天线反射器高性能需求，分析了碳纤维种类、纤维体积分数对单胞等效性能的影响规律。对该材料力学性能的研究，可以为其未来应用于大型高精度可展开天线反射器提供一定的理论依据。     

Plasma transport process in the equatorial/low-latitude ionosphere

The behaviour of the equatorial/low-latitude ionosphere and the transport processes during magnetic disturbed and quiet periods of a high solar activity year, 2014, in the American sector are investigated. Parameters used include vertical drift (Vz), transport term (W), NmF2, hmF2 and scale-height (H). The F2 plasma variations followed the diurnal local solar pattern, being higher at daytime. The sunset maximum and sunrise minimum peaks of hmF2 were directly opposite to the scale height (H) pattern. The plasma distribution was basically controlled by combined actions of the electrodynamic convection/thermospheric composition, which is geomagnetic activity dependent. The annual, semi-annual and winter-anomalies of the F2 parameters were higher at the dip equator in comparison with the low-latitude. The Vz pre-reversal peak magnitude coincided with hmF2 peak and the effects are more pronounced during geomagnetic disturbed conditions. The transport term pattern was similar to that of the scale height and it is suggested as a proxy parameter for quantifying low-latitude plasma irregularities and distribution of thermospheric composition.     

多关节坐标测量机结构参数的校准

多关节坐标测量机末端测头的位置准确度主要受各杆件结构参数误差的影响,为提高多关节坐标测量机的测量准确度,必须对各杆件的结构参数进行校准。首先应用ＤＨ 分析方法,建立了多关节坐标测量机的运动学模型,然后提出了一种简单、快速的单点 多姿态校准方法,运用全微分、最小二乘法和迭代算法等数学方法,建立了校准模型。实验表明,该校准方法适合于多关节坐标测量机结构参数真值的获得,并可极大地提高测量机的位置准确度。     

A参量在高频阻抗测量中的应用

根据微波网络理论提出了利用A参量求解高频阻抗的新方法,并将其应用于网络分析仪系统,对短波阻抗进行了测量。实践证明,该方法与传统的利用S参量的方法(利用反射系数)相比大大地拓宽了阻抗测量范围,在通用仪器上获得了比专用仪器高的测量精度,同时还解决了网络分析仪与非同轴网络的连接问题。     

Levy 方法的改进

由于Levy方法简化了指标函数,并采用经典的最小二乘法,用于估计系统传递函数的参数,受实验数据误差影响大。基于Levy方法但保持原来的指标函数,提出一种改进的增量迭代算法和正交最小二乘法,仿真结果表明,该算法具有良好的收敛性,并使系统参数估计精度较Levy方法有明显的提高。     

飞机大攻角非定常气动力建模与辨识

采用一阶微分方程描述由非线性非定常效应引起的气动力增量 ,从而建立了一种新的飞机大攻角非定常气动力数学模型。研究了模型在缓变运动下的线化形式和动导数表达式。讨论了模型参数的辨识问题。算例证实了所建立的气动力数学模型的正确性和所述模型参数辨识方法的有效性