磁选态单束铯束管束光学参数的模拟计算和设计

为提高铯束管跃迁信号强度,在束光学参数设计中,用蒙特卡罗方法模拟计算铯原子通过率和未跃迁比例。通过改变模拟计算中的束光学参数,分析铯原子通过率、未跃迁比例和倍增器首极电流的变化趋势,得到了主要束光学参数的合理取值范围。在铯束管实际装配和试验中使用束光学参数设计结果,有效地增加了倍增器首极电流。     

赛斯纳172R飞机空速管异物堵塞的成因及防范分析

对发生在赛斯纳172飞机上空速管堵塞的故障进行了收集、统计、分析,对空速管堵塞的原因进行分析,并提出了有效的防范措施。     

Advances and trends in plastic forming technologies for welded tubes

With the implementation of environmental protection, sustainable development and conservation-oriented policies, components and parts of thin-walled welded tubes have gained increasing application in the aircraft and automotive industries because of their advantages: easily achieving forming and manufacturing process at low cost and in a short time. The current research on welded tube plastic forming is mainly concentrated on tube internal high-pressure forming, tube bending forming, and tube spinning forming. The focuses are on the material properties and characterization of welded tubes, finite element modeling for welded tube forming, and inhomogeneous deformation behavior and the mechanism and rules of deformation coordination in welded tube plastic forming. This paper summarizes the research progress in welded tube plastic forming from these aspects. Finally, with a focus on the urgent demand of the aviation, aerospace and automotive industries for high-strength and light-weight tubes, this paper discusses the development trends and challenges in the theory and technology of welded tube plastic forming in the future. Among them,laser tailor-welded technology will find application in the manufacture of high-strength steel tubes.Tube-end forming technology, such as tube flaring and flanging technology, will expand its application in welded tubes. Therefore, future studies will focus on the FE modeling regarding how to consider effects of welding on residual stresses, welding distortions and microstructure, the inhomogeneous deformation and coordination mechanism of the plastic forming process of tailor-welded tubes, and some end-forming processes of welded tubes, and more comprehensive research on the forming mechanism and limit of welded tubes.     

金属弹簧管性能影响因素的仿真分析

为了研究高温密封组件金属弹簧性能,本文通过对波音公司编网状弹簧管结构和Streck心脏支架结构的研究,建立了编织弹簧的几何拓扑构型和数学模型,推导了弹簧直径计算公式。采用AUTODESK3D-MAX构建了编织弹簧的仿真模型,用ANSYS仿真软件分别从编织丝直径、编织密度以及编织方法 3方面探究不同测试对弹簧性能的影响。结果表明,增加弹簧丝直径、降低弹簧管轴向方向的编织密度、提高圆周方向的编织密度、向外的弹簧管编织方式可有效提高弹簧管的回弹性能。     

Cross-sectional deformation behavior of double-ridged rectangular tube with fillers in different stages of H-typed bending

The bent double-ridged rectangular tube (DRRT) with high forming quality is helpful to improve the microwave transmission accuracy. For reducing the cross-sectional deformation in the H-typed bending process, in addition to using rigid mandrel to support the inside of tube, ridge groove fillers are also added to restrict the deformation of ridge grooves. Because of the change of stress and strain state of bent tube in bending, rigid mandrel retracting and specially twice-springback stages, and the springback of fillers, the cross-sectional deformation of tube in each stage may be different. Therefore, based on the ABAQUS platform, the finite element models (FEM) for H-typed bending, mandrel retracting and twice-springback stages of H96 DRRT with fillers were established and validated. It is found that, for the height and width deformation of tube and spacing deformation of ridge grooves, retraction of mandrel can make the distribution of these deformations more uniform along the bending direction. The first springback can reduce these deformations significantly, which should be emphasized. But the second springback only increases them by less amount, which can be ignored. The smaller height deformation of ridge groove and filler can be neglected.     

飞机高升力系统扭力管旋转角度测试方法

在飞机地面模拟试验环境下需要测试高升力系统襟翼扭力管旋转角度.由于扭力管属于系统试验件,在不改变试验环境构型的情况下不可截断或更换安装用于测试扭力管旋转角度的旋转编码器.本文利用同步轮法实现了在不破坏扭力管前提下安装旋转编码器测试扭力管旋转角度,方法简单、可靠,且容易实现,很好的满足了试验大纲要求.     

爆震管壁面热负荷实验

在一台内径61 mm、长度1140 mm的气动阀式脉冲爆震发动机(PDE)上,进行了爆震管热负荷的测量计算,主要采用了两种换热模型:一是自然对流和热辐射模型;二是强迫对流模型.在两种方式下,爆震管的热负荷随频率的变化关系基本相同,即随频率升高而热负荷增大,但频率增加两倍热负荷增加却不止两倍.此外,在方式二的情况下,还得到煤油蒸发率随频率的变化关系,为PDE蒸发器设计提供参考.      

爆轰驱动激波管缝合激波马赫数计算

采用数值求解的方法得出了氢氧爆轰驱动激波管的缝合状态参数.以空气为试验气体时,缝合激波马赫数随着H2摩尔浓度的增加而增加,H2摩尔浓度达到90%左右时达到最大.当缝合马赫数较高时,需要考虑高温真实气体效应的影响,缝合激波马赫数较理想气体的高.以氢空气混合气为试验气体时,缝合激波马赫数较以空气为试验气体的小.通过调整驱动气体与被驱动气体的初始参数,可以得到即能恰好消除Taylor波又能缝合的运行状态.     

非失速二维振荡叶栅非定常流动数值模拟研究

进一步完善了非定常雷诺平均N-S方程求解程序,借助快速网格生成方法,对周期性俯仰运动下NACA0012叶栅的非失速绕流问题进行了数值模拟研究,并分析了振荡叶栅的迟滞效应以及俯仰运动各个参数对迟滞效应的影响.数值模拟结果与实验结果对比表明,本文发展的数值模拟方法是可靠的;结果还表明,随着振幅,折合频率的增加迟滞效应增强,平均攻角对迟滞效应无影响;保持无量纲参数--振幅和折合频率的乘积--恒定时,迟滞效应相同.     

周期结构电磁特性在高频真空器件中的应用

作为行波类真空电子器件的核心组件,慢波结构是一种周期结构,其场可以有无限多个模式,每个模式由无穷多个空间谐波构成.每个空间谐波有相应的色散曲线且曲线各段有不同的特性.提出了周期结构色散特性的全维度开发的概念,并以一种可用微电机系统(MEMS)技术加工的折叠波导(FWG)慢波结构为例,对其色散特性进行了分析,利用这些色散特性开展了行波管(TWT)、返波管(BWO)等传统器件的研究工作,同时提出了过模器件、带边振荡器(BO)和谐波放大器(THAT)等新型器件,这些器件的实验研究则以W波段及其以上频率为主,最后给出了突破的关键技术以及测试得到的器件的主要性能.