航天器交会对接中GPS的应用

卫星定位和卫星通讯是正在寻求的空间飞行器高级自主交会系统的首选测控手段。本文概述了航天器的交会对接基本要求和过程以及美国全球定位系统（ＧＰＳ）和组成、定位原理、精度和差分原理后，列出了两种形式的相对运动方程。利用运动方程求解、单纯ＧＰＳ、差分ＧＰＳ的结合，可以完成追踪航天器向目标航天器接近的整个导引过程，且可以省去庞大的地面遥控遥测、星上雷达等设备，减少误差源。仿真计算证实了这一设计思想的可行性和     

机载目标状态估计器

研究基于空载雷达测量下的机动目标状态估计器的设计问题。通过建立直角坐标状态方程和选取一种伪测量量，并采用测量模型线性化的方法，建立起了估计器的基本结构，在此基础上增加距离通道的冗余滤波，进一步提高距离通道的估计精度，最后将估计器联入整个综合火力／飞行控制系统中，进行了Ｍｏｎｔｅ Ｃａｒｌｏ仿真，仿真结果表明，设计的目标状态估计器具有很好的跟踪估计性能。     

杂波环境下的机动目标检测和跟踪算法

交互多模式(IMM)是一种有效的机动目标跟踪算法,但由于其要求具有很多的先验前提条件而不利于工程实现.研究了一种杂波环境下更适合于工程实现的机动目标(同样适用非机动目标)的跟踪算法,该算法通过一种由测量位置估计误差决定的机动检测函数来实现杂波背景中的机动目标检测,并通过改变Kalman滤波的相关参数,实现自适应跟踪.该算法克服了IMM算法的模式限制和复杂性,同时也避免了对非机动目标的跟踪中,在跟踪模式间相互切换时所换造成的影响.通过在空管系统(ATC)的大量模拟实验,验证了该算法的有效性和重大应用价值.     

飞行模拟器动力学控制的研究

针对如何获取运动平台的实时加速度和在精确跟踪加速度的同时限制位移,建立了系统动力学模型以计算加速度,使用虚拟弹簧法限制位移。在Matlab环境下,搭建了整个伺服控制系统。仿真结果表明,控制系统在保证平台位移不脱离限制区域的基础上,实现了加速度的精确跟踪。     

测量船通信网络自检测方法

针对测量船通信网络由2层帧方式交换升级为3层包交换方式后无法使用上星自环检测方式实现自检测的问题,在分析通信网络自检测模式下的链路特性的基础上,提出基于组播报文实现自检测的构想。设计利用组播洪泛特性实现报文环回的网络拓扑结构以及实现检测与对比报文的硬件设备,阐述检测软件发送、接收、处理报文的流程,实现了网络通断、时延及丢包率的自检测,并通过模拟检测实验证明了设计方案是切实可行的。     

Decentralized sliding-mode control for spacecraft attitude synchronization under actuator failures

This paper examines attitude synchronization and tracking problems with model uncertainties, external disturbances, actuator failures and control torque saturation. Two decentralized sliding mode control laws are proposed and analyzed based on algebraic graph theory. Using Barbalat׳s Lemma, it is shown that the control laws guarantee each spacecraft approaches the desired time-varying attitude and angular velocity while maintaining attitude synchronization among the other spacecraft in the formation. The first controller is designed in the presence of model uncertainties, external disturbances, and actuator failures. The results are extended to the case with control input saturation in the second controller. Both control laws do not require online identification of failures. Numerical simulations are presented to show the effectiveness of the proposed attitude synchronization and tracking approaches.     

A Self-organizing Bearings-only Target Tracking Algorithm in Wireless Sensor Network

In the bearings-only target tracking, wireless sensor network (WSN) collects observations of the target direction at various nodes and uses an adaptive filter to combine them for target tracking. An efficient network management is necessary to gain an optimal tradeoff between locating accuracy and energy consumption. This article proposes a self-organizing target tracking algorithm to select the most beneficial subset of nodes to track the target at every snapshot. Compared with traditional methods, this scheme avoids the need for keeping global position information of the network as in greedy selection. Each node judges its future usefulness depending on the knowledge of its own position and using simple mathematics computation. Simulations indicate that this scheme has locating accuracy comparable to the global greedy algorithm. Also, it has good robustness against node failure and autonomous adaptability to the change of the network scale. Furthermore, this algorithm consumes limited energy because only a portion of nodes partakes in the selection at every snapshot.     

Special Technologies Related to Electron Beam Welding

In order to improve the manufacturing quality of electron beam welding,some technologies are developed by using the special features of electron beam.Comparing with the conventional electron beam welding,the usage of multi-beam technology and micro-beam technology are introduced.In addition.the development of beam diagnostic system is also presented.     

反辐射导弹末制导跟踪滤波技术研究

在分析反辐射导弹末制导段特点的基础上，针对其跟踪模型不满足可观测性要求的问题，提出了一种基于方位／俯仰角的跟踪方案。理论分析和仿真验证了该方案具有较高的跟踪精度和实时性，并具有较好的通用性，为解决不可观测情况下的高精度稳定跟踪问题提供了一种新的思路。     

ESA’s process for the identification and assessment of high-risk conjunction events

ESA’s Space Debris Office provides an operational service for the assessment of collision risks of ESA satellites. Currently, the ENVISAT and ERS-2 missions in low Earth orbits are covered by this service. If an upcoming high-risk conjunction event is predicted based on analysis of Two-Line Element (TLE) data from the US Space Surveillance Network, then independent tracking data of the potential high-risk conjunction object are acquired to improve the knowledge of its orbit. This improved knowledge and the associated small error covariances derived from the orbit determination process scale down the position error ellipsoid at the conjunction epoch. Hence, for the same miss-distance, in most cases an avoidance manoeuvre can be suppressed with an acceptable residual risk.