卫星在轨失效统计分析

从故障影响的设备、范围、时间特性等方面,对20世纪70年代以来国内外卫星272次典型在轨故障进行了分析。研究发现,发生故障的设备和发生故障的时间等都存在明显的规律性。对这些故障特性的深入研究可以制定针对性的故障防护措施,以降低卫星故障的发生率,并有助于在故障发生后采取及时正确的措施以避免灾难性后果。基于上述研究,文章给出了卫星设计过程中有效规避故障的一些建议,以提高卫星的在轨存活率。     

基于欠采样的零阶优化算法

非平衡学习吸引了许多研究者的关注。一般情况下,少数类是更值得关注的,并且其误分类代价要远高于多数类。由于非平衡数据分布的非均衡性,标准的分类算法将难以适用。为了解决非平衡数据分类问题,给出了基于欠采样的零阶优化算法。首先,为了降低数据非平衡分布的影响,针对不同非平衡比的数据集给出了不同的两种采样策略。然后,采用了一种引入间隔均值项的支持向量机(Support vector machine,SVM)优化模型进行分类,并使用带有方差减小的零阶随机梯度下降算法进行求解,提高了算法的精度。在非平衡数据上进行了对比实验,实验证明提出的方法有效提高了非平衡数据的分类效果。     

基于序列凸优化的高超声速滑翔式再入轨迹快速优化

针对具有热流、动压、过载以及多个禁飞区约束的再入轨迹优化问题,提出采用序列凸优化方法快速求解。利用归一化时间作为自变量解决终端时间自由问题,并引入辅助控制变量以减少序列优化结果中的高频振荡,在此基础上,通过线性化、离散化和非凸约束的凸化处理,将非凸非线性优化问题转化为二阶锥规划(Second Order Conic Programming,SOCP)问题,然后采用凸优化求解算法快速求解。数值优化结果与对比验证表明该方法能快速高效求解多约束条件下的再入轨迹优化问题,且计算效率和性能均优于传统的非线性规划方法。     

一种高效的基于可靠性的多学科设计优化方法(英文)

Design for modem engineering system is becoming multidisciplinary and incorporates practical uncertainties; therefore, it is necessary to synthesize reliability analysis and the multidisciplinary design optimization （MDO） techniques for the design of complex engineering system. An advanced first order second moment method-based concurrent subspace optimization approach is proposed based on the comparison and analysis of the existing multidisciplinary optimization techniques and the reliability analysis methods. It is seen through a canard configuration optimization for a three-surface transport that the proposed method is computationally efficient and practical with the least modification to the current deterministic optimization process.     

AHP方法在系(部)工作评价中的应用

本文给出了系(部)工作评价的AHP模型，并对模型进行求解，说明了该模型的有效性。     

基于主动失谐优化的叶轮瞬态加减速振动抑制

提出了一种基于主动失谐优化的叶轮瞬态加减速振动抑制方法.首先建立了瞬态加减速激励下的叶轮降阶模型,获得了表征失谐对瞬态振幅影响的失谐放大因子.然后基于降阶模型,采用蒙特卡洛仿真快速计算了一系列瞬态激励下失谐放大因子的概率密度分布,结果表明:失谐放大因子在大多数瞬态激励下受到随机小失谐的影响大于在稳态激励下受到的影响,且...     

关于“用好的作风选人，选作风好的人”的逻辑梳理

“用好的作风选人，选作风好的人”必须确定相关的概念，必须进行科学的判断，必须进行正确的推理。本文试图从逻辑角度对这一选人用人原则进行梳理。     

Stall flutter prediction based on multi-layer GRU neural network

The modeling of dynamic stall aerodynamics is essential to stall flutter, due to the flow separation in a large-amplitude pitching oscillation process. A newly neural network based Reduced Order Model (ROM) framework for predicting the aerodynamic forces of an airfoil undergoing large-amplitude pitching oscillation at various velocities is presented in this work. First, the dynamic stall aerodynamics is calculated by solving RANS equations and the transitional SST-γ model. Afterwards, the stall flutter bifurcation behavior is calculated by the above CFD solver coupled with structural dynamic equation. The critical flutter speed and limit-cycle oscillation amplitudes are consistent with those obtained by experiments. A newly multi-layer Gated Recurrent Unit (GRU) neural network based ROM is constructed to accelerate the calculation of aerodynamic forces. The training and validation process are carried out upon the unsteady aerodynamic data obtained by the proposed CFD method. The well-trained ROM is then coupled with the structure equation at a specific velocity, the Limit-Cycle Oscillation (LCO) of stall flutter under this flow condition is predicted precisely and more quickly. In order to predict both the critical flutter velocity and LCO amplitudes after bifurcation at different velocities, a new ROM with GRU neural network considering the variation of flow velocities is developed. The stall flutter results predicted by ROM agree well with the CFD ones at different velocities. Finally, a brief sensitivity analysis of two structural parameters of ROM is carried out. It infers the potential of the presented modeling method to depict the nonlinearity of dynamic stall and stall flutter phenomenon.     

复合材料薄壁梁扭转的高次翘曲理论

利用翘曲连续修正概念导出表示剖面翘曲位移的形函数序列,据此建立单闭室复合材料薄壁梁扭转分析的高次翘曲理论,并结合分层的具体情况,考察分层对复合材料薄壁梁扭转翘曲的影响。算例表明,该高次翘曲理论具有很好的收敛性。     

飞机电网零序阻抗的数值计算

从麦克斯韦方程出发,推导了飞机电网零序阻抗参数的计算公式。对几种不同敷设方式载流导线的零序阻抗进行了计算,其结果与标准值较为接近。这种数值计算方法比传统的解析近似估算方法更为合理和准确。