模型参考自适应原理在冲击信号零点偏移补偿中的应用

在对衬垫材料进行冲击特性的实验研究时，测量所获得的波形常含有零点偏移，零点偏移的存在将对实验结果相入不可忽略的误差。因而在数据处理时应首先对零偏进行补偿以提高测量精度。本文作者根据在实测波形特征分析和能量原理基础上所建立的补偿方法，将现代控制理论中的模型参考自适应原理用于冲击信号的零点偏移补偿，拟定了模型参考自适应算法，给出了参考模型的建模途径，并编制了应用软件，支实验数据进行零偏补偿，取得了满意     

基于预测控制的角度约束制导律设计

针对低高度、大倾角末端姿态约束问题,提出了一种弹道跟踪制导律.离线优化得到满足终端约束的基准弹道.为了避免出现奇异,将对位置的跟踪转换为对视线角及视线角速度的跟踪.根据当前状态,利用连续时间非线性预测控制,以弹道跟踪误差和控制能量的组合为性能指标,在线滚动优化得到制导指令,分析了制导律的参数选取,最后对该制导律进行了全...     

真空热试验热电偶测温参考点分析改进

热电偶测温系统是真空热试验中最常用的温度测量系统,温度参考点是热电偶测温系统的重要组成部分。文章分析了热电偶温度参考点的各项技术要求,为参考点结构设计、热设计、电装工艺等提供了依据;同时结合温度参考点的现状,为简化操作,降低使用风险,提出了一种优化改进结构方案,并进行了热分析计算以及试验验证,结果表明该方案完全满足参考点各项技术要求。     

星地无线电双向法时间比对计算模型及其误差评估

卫星导航定位系统测距的基础是测时,而定轨和定位的前提是各观测量的时间同步。因此,时间同步技术是卫星导航定位系统建设的关键技术基础之一。根据星地无线电双向法时间同步技术的基本原理,详细推导了其在地心惯性系中的基本计算模型,并以静止地球同步轨道卫星为例,分析了该计算模型中的距离改正项时延对星地间相对钟差的影响量级。     

Geometric structures of frames of reference and natural language semantics

This article aims at formal specifications of reference systems in spatial cognition. It concentrates on two roles of reference systems connected to spatial language: reference systems resolving ambiguities and reference systems forming a basis for the classification of linguistic terms. Although coordinate systems are often seen as candidates for the geometric structure of reference systems, it is shown here that they do not appear in the explanations that go into the details. An analysis of the German terms vor, hinter, rechts and links (in front of, in back of, right, left) presents an alternative model for the geometric structure of spatial reference systems.     

Performance analysis of PPP ambiguity resolution with UPD products estimated from different scales of reference station networks

Integer ambiguity fixing with uncalibrated phase delay (UPD) products can significantly shorten the initialization time and improve the accuracy of precise point positioning (PPP). Since the tracking arcs of satellites and the behavior of atmospheric biases can be very different for the reference networks with different scales, the qualities of corresponding UPD products may be also various. The purpose of this paper is to comparatively investigate the influence of different scales of reference station networks on UPD estimation and user ambiguity resolution. Three reference station networks with global, wide-area and local scales are used to compute the UPD products and analyze their impact on the PPP-AR. The time-to-first-fix, the unfix rate and the incorrect fix rate of PPP-AR are analyzed. Moreover, in order to further shorten the convergence time for obtaining precise positioning, a modified partial ambiguity resolution (PAR) and corresponding validation strategy are presented. In this PAR method, the ambiguity subset is determined by removing the ambiguity one by one in the order of ascending elevations. Besides, for static positioning mode, a coordinate validation strategy is employed to enhance the reliability of the fixed coordinate. The experiment results show that UPD products computed by smaller station network are more accurate and lead to a better coordinate solution; the PAR method used in this paper can shorten the convergence time and the coordinate validation strategy can improve the availability of high precision positioning.     

基于CFD数值仿真技术的飞行器动导数计算

为了研究表征飞行器动态稳定特性的动导数,结合计算流体力学方法,基于滑移网格技术,采用小幅度强迫振动法和差分法两种非定常方法,推导了俯仰组合动导数以及滚转阻尼导数的计算表达式,并结合多参考系模型采用准定常方法计算滚转阻尼导数。建立了基于计算流体力学技术的飞行器动导数计算方法。对国际动导数标模Finner导弹进行了计算验证。两种非定常方法对俯仰组合动导数的计算误差分别为0.65%、6.13%,对滚转阻尼导数的计算误差分别为2.5%、0.06%。求解滚转阻尼的准定常方法对于滚转阻尼导数的计算误差为2.67%。三种方法的计算结果与风洞试验结果吻合的很好。非定常方法计算精度高,准定常方法可以快捷迅速得到结果。本文的数值方法不仅适用于超声速,同样可以用于亚、跨声速时的动导数计算。     

基于方向投影的堑壕和交通壕自动检测

对航空照片上堑壕和交通壕的判读是野战工事判读中一项重要的内容，对堑壕和交通壕影像的检测是该项判读工作的技术基础。本文提出了航空照片图上的基准点，并给出了基于方向投影基准点的堑壕和交通壕自动检测方法。