基于离散粒子群算法的航空发动机总装工艺优化方法

为了提高航空发动机总装工作的效率与质量,加强对总装工序和总装机件的管控,量化不同总装人员工作任务量,提高发动机总装的一致性和可追溯性,提出了1种发动机总装分区优化方法。以改进的2进制粒子群算法为基础,平衡了发动机总装各区域的工作内容,最小化各总装区域的工作差异,增强了每个区域装配机件的关联度,提高了总装工作的并行度,从而提高了装配质量。以某型发动机总装区域划分工作为实例,通过上述算法进行了总装区域划分,量化了所有装配区域每一工序的具体装配内容,减小了不同装配区域间的机件差异,杜绝了缺件、剩件等装配问题。     

Advances in critical technologies for hypersonic and high-enthalpy wind tunnel

Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster, higher and further. The great progress has been achieved during the recent years and their critical technologies are still in an urgent need for further development. There are at least four kinds of hypersonic and high-enthalpy wind tunnels that are widely applied over the world and can be classified according to their operation modes. These wind tunnels are named as air-directly-heated hypersonic wind tunnel, light-gas-heated shock tunnel, free-piston-driven shock tunnel and detonation-driven shock tunnel, respectively. The critical technologies for developing the wind tunnels are introduced in this paper, and their merits and weakness are discussed based on wind tunnel performance evaluation. Measurement techniques especially developed for high-enthalpy flows are a part of the hypersonic wind tunnel technology because the flow is a chemically reacting gas motion and its diagnosis needs specially designed instruments. Three kinds of the measurement techniques considered to be of primary importance are introduced here, including the heat flux sensor, the aerodynamic balance, and optical diagnosis techniques. The techniques are developed usually for conventional wind tunnels, but further improved for hypersonic and high-enthalpy tunnels. The hypersonic ground test facilities have provided us with most of valuable experimental data on high-enthalpy flows and will play a more important role in hypersonic research area in the future. Therefore, several prospects for developing hypersonic and high-enthalpy wind tunnels are presented from our point of view.     

Optimization and verification of free flight separation similarity law in high-speed wind tunnel

Based on the similarity of separation time, a similarity law optimization method for high-speed weapon delivery test is derived. The typical separation state under wind load is simulated by the numerical method. The real separation data of aircraft, separation data of previous test methods, separation data of ideal wind tunnel test of previous methods, and simulation data of the proposed optimization method are obtained. A comparison of the data shows that the method proposed can improve the performance of tracking. Similarity law optimization starts with the development of motion equations and dynamic equations in the windless state to address the problems of mismatching between vertical and horizontal displacement, and to address the problems of separation trajectory distortion caused by insufficient gravity acceleration of the scaling model of existing light model. The ejection velocity of the model is taken as a factor/vector, and is adjusted reasonably to compensate the linear displacement insufficiency caused by the insufficient vertical acceleration of the light model method, so as to ensure the matching of the vertical and horizontal displacement of the projectile, and to improve the consistency between the test results of high-speed projection and the actual separation trajectory. The optimized similarity law is applicable to many existing free-throwing modes of high-speed wind tunnels. The optimized similarity law is not affected by the ejection velocity and hanging mode of the projectile. The optimized similarity law is suitable not only for the launching of the buried ammunition compartment and external stores, but also for the test design of projectile launching and gravity separation.     

基于拓扑优化和形状优化的桨叶结构设计

直升机旋翼桨叶剖面结构设计是研究旋翼动力学设计的基础。提出一种联合拓扑优化和形状优化的 两级优化设计方法,可用于桨叶剖面结构的设计。第一级优化以变密度法(SIMP)作为拓扑优化的材料插值方 法,以桨叶体积最小化为设计目标,约束桨叶节点位移和应力,建立桨叶的拓扑优化求解模型;第二级优化以重 构的桨叶模型为基础开展形状优化,降低局部应力集中以及找到合理的边界节点位置。对优化后的模型进行 有限元分析,结果表明:通过拓扑优化和形状优化的两级优化,能够得到满足强度和稳定性要求的结构布局,为 桨叶结构设计提供指导方案。     

汽车双横臂独立悬架参数优化与仿真研究

针对国内某轿车双横臂独立悬架系统，运用ADMAS／View模块建立了双横臂式悬架模型，利用ADMAS／Insight模块对建立的双横臂式独立悬架进行了优化分析。优化结果分析表明：通过悬架参数优化设计，使前悬架性能有了较大的提高。     

Mechanism parameters optimization of bionic frog jumping robot based on velocity directional manipulability measure

以速度方向可操作度作为跳跃性能的评价指标,从机构设计角度寻求改善仿蛙跳跃机器人跳跃性能的方法.在仿蛙跳跃机器人机构模型的基础上,建立了起跳阶段的运动学方程,得到机器人从关节空间到质心运动空间的速度映射关系,结合速度方向可操作度,利用优化算法对仿蛙跳跃机器人的机构参数进行优化,使机器人的跳跃性能达到最佳.优化结果表明,运用速度方向可操作度理论,对跳跃机器人机构参数进行优化研究是有效可行的.     

基于遗传算法的军事物流运输计划

针对军事物流运输中车辆装载和车辆路径的组合问题进行研究,建立车辆装载和车辆路径组合问题的目标优化模型。通过改进遗传算法对模型求解,得到了较为满意的结果,可以在满足多车型多品种货物配送约束的条件下,实现运输车辆最少、车辆满载率高、车辆运输路径最短的目标。     

Global aerodynamic design optimization based on data dimensionality reduction

In aerodynamic optimization, global optimization methods such as genetic algorithms are preferred in many cases because of their advantage on reaching global optimum. However, for complex problems in which large number of design variables are needed, the computational cost becomes prohibitive, and thus original global optimization strategies are required. To address this need, data dimensionality reduction method is combined with global optimization methods, thus forming a new global optimization system, aiming to improve the efficiency of conventional global optimization. The new optimization system involves applying Proper Orthogonal Decomposition (POD) in dimensionality reduction of design space while maintaining the generality of original design space. Besides, an acceleration approach for samples calculation in surrogate modeling is applied to reduce the computational time while providing sufficient accuracy. The optimizations of a transonic airfoil RAE2822 and the transonic wing ONERA M6 are performed to demonstrate the effectiveness of the proposed new optimization system. In both cases, we manage to reduce the number of design variables from 20 to 10 and from 42 to 20 respectively. The new design optimization system converges faster and it takes 1/3 of the total time of traditional optimization to converge to a better design, thus significantly reducing the overall optimization time and improving the efficiency of conventional global design optimization method.     

国外燃油系统的防弹抗坠毁技术

防弹抗坠毁燃油系统是为了满足武装直升机的使用环境要求,不断得到认可与发展。本文介绍了国外燃油系统的防弹抗坠毁技术要求及其运用与发展。它主要包括油箱、软管、接头,供输油系统的防弹抗坠毁要求及其综合设计技术。探讨了该项技术给予我们的借鉴作用。     

Photolytic behaviour of methane at Lyman-α and 248 nm: Studies in the frame of a simulation program of Titan’s atmosphere (S.E.T.U.P.)

This paper first describes briefly some of the forefront global simulations of Titan’s atmosphere that have been carried out up to now. In these experiments, an initial gaseous mixture of N₂/CH₄ is submitted to a single energy source and the retrieved gas and/or solid phase(s) is/are analyzed by different techniques.