飞机蒙皮镜像铣加工稳定性分析

镜像铣技术是近年来提出的一种针对大尺寸薄壁件的加工方法,其加工环保、高效,具有逐步取代传统化铣加工的趋势。针对飞机蒙皮镜像铣加工过程中的颤振问题,首先,根据镜像铣加工特点,建立工艺系统颤振稳定性极限的预测模型;其次,通过有限元方法对蒙皮工件进行模态分析,分析蒙皮不同加工位置动力学特性变化导致的铣削稳定性变化,并通过实验测量获取工件动力学参数,对不同加工位置的稳定性做出预测;最后,开展加工实验,基于非接触测量方法,在线监测镜像铣加工区域的振动位移,通过时、频域信号对加工状态进行辨识,揭示了镜像铣加工过程的稳定性变化及失稳机制,验证了所提方法的准确性,在工程领域具有较高的实用价值。     

非接触转子振动位移采集系统测试误差

对基于叶尖定时测量原理开发的非接触转子振动位移采集系统(NRDMS)测试误差进行了研究分析。将模拟叶片振动标准信号作为采集系统测试的输入信号,研究了测试对象参数和采集系统时基信号对测试结果误差的影响,理论和测试结果分析表明:测试误差主要受采集系统时基信号和转速的影响,采集系统的最大引用误差为0.066%。      

Influence of leading edge with real manufacturing error on aerodynamic performance of high subsonic compressor cascades

To investigate the influence of real leading-edge manufacturing error on aerodynamic performance of high subsonic compressor blades, a family of leading-edge manufacturing error data were obtained from measured compressor cascades. Considering the limited samples, the leading-edge angle and leading-edge radius distribution forms were evaluated by Shapiro-Wilk test and quantile–quantile plot. Their statistical characteristics provided can be introduced to later related researches. The parameterization design method B-spline and Bezier are adopted to create geometry models with manufacturing error based on leading-edge angle and leading-edge radius. The influence of real manufacturing error is quantified and analyzed by self-developed non-intrusive polynomial chaos and Sobol’ indices. The mechanism of leading-edge manufacturing error on aerodynamic performance is discussed. The results show that the total pressure loss coefficient is sensitive to the leading-edge manufacturing error compared with the static pressure ratio, especially at high incidence. Specifically, manufacturing error of the leading edge will influence the local flow acceleration and subsequently cause fluctuation of the downstream flow. The aerodynamic performance is sensitive to the manufacturing error of leading-edge radius at the design and negative incidences, while it is sensitive to the manufacturing error of leading-edge angle under the operation conditions with high incidences.     

高超声速条件下星光传输模拟方法与仿真

以高超声速飞行器为研究对象,建立了高速流场下的星光传输模拟仿真方法,定性、定量地研究平台气动光学效应对星光导航的影响。采用基于k-ω/SST两方程湍流模型的雷诺平均法计算星敏感器安装在飞行器不同位置处（头部、中部和尾部）的外流场密度分布,进而得到流场的空间折射率分布。在此基础上,利用几何光学法计算星光由高速层流流场引起的光程差、点扩散函数、像偏移等光学传输效应,得出经过层流流场的星光降晰图。同时运用统计光学理论计算高速湍流流场引起的星光出瞳面的波像差、密度均方差、相位均方差、Strehl比等光学传输效应,得出经过湍流流场的星光降晰图。仿真结果与理论分析吻合,从而为研究星光在高超声速流场中传输的机理提供了可靠的技术手段。     

星地动态双向时间同步与测距算法

针对卫星运动对星地距离和钟差测量的不利影响,提出一种基于最小二乘拟合的星地动态双向时间同步与测距算法。在建立星地可视模型基础上,仿真了MEO运动卫星与地面时间同步站之间星地距离的变化规律,分析了卫星运动对星地双向时间同步与测距的主要不利影响。该算法首先利用星地双向时间同步数据分别生成星地距离和钟差拟合多项式,然后联合求解出运动卫星误差最小的星地距离与钟差。实验结果表明了该算法的合理性和科学性,在包含仿真误差的条件下,其时间同步精度优于3ns,测距精度优于3m。将其应用到各种空天应用系统的星地时间同步与测距中,可以消除卫星运动对双向时间同步与测距的不利影响,提高时间同步与测距精度。     

Applications of tuned mass dampers to improve performance of large space mirrors

In order for future imaging spacecraft to meet higher resolution imaging capability, it will be necessary to build large space telescopes with primary mirror diameters that range from 10 m to 20 m and do so with nanometer surface accuracy. Due to launch vehicle mass and volume constraints, these mirrors have to be deployable and lightweight, such as segmented mirrors using active optics to correct mirror surfaces with closed loop control. As a part of this work, system identification tests revealed that dynamic disturbances inherent in a laboratory environment are significant enough to degrade the optical performance of the telescope. Research was performed at the Naval Postgraduate School to identify the vibration modes most affecting the optical performance and evaluate different techniques to increase damping of those modes. Based on this work, tuned mass dampers (TMDs) were selected because of their simplicity in implementation and effectiveness in targeting specific modes. The selected damping mechanism was an eddy current damper where the damping and frequency of the damper could be easily changed. System identification of segments was performed to derive TMD specifications. Several configurations of the damper were evaluated, including the number and placement of TMDs, damping constant, and targeted structural modes. The final configuration consisted of two dampers located at the edge of each segment and resulted in 80% reduction in vibrations. The WFE for the system without dampers was 1.5 waves, with one TMD the WFE was 0.9 waves, and with two TMDs the WFE was 0.25 waves. This paper provides details of some of the work done in this area and includes theoretical predictions for optimum damping which were experimentally verified on a large aperture segmented system.     

摄影测量技术及其在航天器变形测量中的应用

文章介绍了摄影测量技术的测量原理,系统调研了近年来摄影测量技术在国内外航天器变形测量领域的发展概况,分析总结了该技术的发展趋势和关键技术,并结合我国的具体国情提出了当前变形测量技术发展的建议,为我国在航天器大型复杂部件微变形测量技术的发展提供借鉴和参考。     

基于分布式信源编码和感兴趣区域编码的干涉多光谱图像压缩

基于干涉多光谱图像特点和应用环境要求,提出一种基于分布式信源编码和感兴趣区域编码的干涉多光谱图像压缩算法。编码端通过关键帧预测出边信息帧,然后联合估计的边信息帧和插值分布的概率模型在编码端进行比特平面码率估计,最后采用基于率失真提升的感兴趣区域编码,调整图像不同区域的率失真斜率来进行更合理的码率分配。实验结果表明,该算法比传统算法更好地保护了多光谱图像的光谱信息。在不同压缩比的情况下,这种编码方式在干涉多光谱图像压缩系统中可获得较好的效果,算法复杂度低。     

用于热控涂层性能原位测试的辐射计设计

针对空间环境中热控涂层性能退化的问题,提出一种模拟空间环境中利用测热法实现热控涂层太阳吸收率原位测试的辐射计设计方案.结合模拟空间环境的测试要求,进行辐射计的原理设计与理论研究;对辐射计进行结构热分析,建立辐射计测试过程中各项换热的计算式,从而得到辐射计的瞬态计算模型.恒温测试环境下利用辐射计对SR107热控涂层进行了测试.实验结果表明:辐射计测试的SR107热控涂层太阳吸收率值与该涂层的标定值之间的相对误差在2%以内,测试的不确定度为6.3%,实验结果验证了该测试方法的有效性.