ATM局域网仿真技术

简要介绍了 Ａ Ｔ Ｍ 局域网仿真的主要原理，以 Ｉ Ｂ Ｍ ８２６０ Ａ Ｔ Ｍ 交换机为例，具体分析了 Ａ Ｔ Ｍ 局域网仿真的实现细节。     

高校分析化学人才培养模式研究

高校是分析化学人才培养的摇篮,然而,目前高校分析化学人才培养中存在诸多问题,使得高校难以顺应时代对分析化学人才的需求。为此,分析了21世纪分析化学人才应该具备的素质,并以此为基点,探讨了目前高校分析化学人才培养的误区,提出分析化学人才培养模式的调整思路。     

TRANSIENT RESPONSE INVESTIGATION OF GIMBALLED TILTROTORS DURING ENGAGE AND DISENGAGE OPERATIONS

Ｕｎｉｑｕｅａｎｄｏｆｔｅｎｈａｚａｒｄｏｕｓｃｏｎｄｉｔｉｏｎｓａｒｅｅｎｃｏｕｎｔｅｒｅｄｗｈｅｎｒｏｔｏｒｃｒａｆｔａｒｅｏｐｅｒａｔｅｄｆｒｏｍｓｈｉｐｂａｓｅｄｐｌａｔｆｏｒｍｓ．Ｏｎｅｏｆｔｈｅｍｏｒｅｔｒｏｕｂｌｅｓｏｍｅｒｏｔｏｒｃｒ...     

环境减灾-1A、1B卫星光学载荷在轨运行情况分析

环境减灾-1A、1B卫星于2008年9月6日发射升空,至2013年7月20日,2颗卫星的4台宽覆盖多光谱CCD相机、1台超光谱成像仪(HSI)和1台红外相机(IRS)已在轨稳定工作近5年,共获取超过61万景2级地面遥感图像数据。文章对在轨运行的光学载荷遥测参数进行了统计和分析,结果表明:DC/DC电压遥测变化量不超过5%,关键光机部位温度遥测变化量小于2.25℃,转动部件电压和电流遥测变化量小于1%,遥测参数均在设计范围内,显示光学载荷在轨稳定正常工作。最后,综合分析了光学载荷图像数据应用情况,分析表明:光学载荷图像数据具有较强的地物影像分类、提取和分辨能力,与国外同类卫星比较,水体识别符合度达到90%以上,旱情分级符合度大于66%,光谱分辨率达到5nm,积雪范围提取精度达到90%以上,在各类应用领域发挥了较大的效能。     

一种低位作业自动焊接方法--CO2焊与点焊在客车车身制造中的新运用

本文通过介绍一种客车顶盖蒙皮、顶骨架低位作业自动焊接方法,综合CO2气体保护焊和单面双点电阻焊,找出影响期焊接质量的原因及解决方法,以充分发挥其焊接变形小、焊接强度高、节能、高效的特点.     

多任务在轨服务模块化智能航天器技术研究

首先介绍了在轨服务技术的分类及国内外近期研究进展,结合各国已开展项目的验证情况,分析了在轨服务模式、适应多任务在轨服务航天器的发展思路。为适应卫星发射和在轨服务的任务需要,提出了多任务服务航天器的方案设想,以期降低在轨服务操作的难度,提升在轨服务系统执行多任务的能力。最后初步分析了用于演示验证任务的服务航天器总体参数及任务规划。     

提高长线传输数字波形质量的技术措施

从两方面论述数字编码波形在长线上传输的影响因素及其改善措施。通过分析并经实验表明，长线的分布电容影响通常居诸因素之首位。改进长线驱动电路，在一定程度上，可改善其传输波形之质量。另外，可利用长线传输波形的同时，还传输供总线接口电路需要的电源能量，满足总线浮空隔离的要求，有效地抑制了共模干扰。此项技术适用于远距多路串行总线的数据采集系统。     

基于现代教育技术的虚拟实验系统构建模式的研究

虚拟实验系统是现代教育技术和实践教学理论相结合的产物。通过对网上虚拟实验系统构建技术的全面分析和总结 ,将适合于高职高专院校的虚拟实验教学系统的构建模式划分为模拟演示型、系统仿真型、虚拟操作训练型和真实测量型等四种类型 ,并给出了对于高职高专院校具有重要的意义的构建方案、实现思路、适用场合和应用案例     

The evolution of mirror type magnetic fluctuations in the magnetosheath based on multipoint observations

Two orbits were selected in January–February 2006 when the separation between the Cluster spacecraft was large and mirror type magnetic field fluctuations were observed by all spacecraft in different regions of the terrestrial magnetosheath. Minimum variance analysis was applied to find the mirror type fluctuations, and the amplitude of the fluctuations was determined individually. Mirror mode structures are moving along the streamlines frozen in the plasma. A model was developed for the calculation of plasma flowtime from the bow shock to the observation point. The growth rate of the field strength perturbations was estimated by comparing the amplitudes of fluctuations observed simultaneously at distant locations (∼10,000 km) based on the assumption that δB ∼ exp(γt). The obtained growth rate values were about an order of magnitude smaller than those provided by linear models and they decreased in the inner regions of the magnetosheath, indicating some saturation in the growth of the waves when proceeding towards the magnetopause. The results of these two case studies suggest that mirror type fluctuations originate from the compression region downstream of the quasi-perpendicular bow shock, and the growth of the fluctuations cannot be described by linear approximations.     

Numerical study on flow fields and aerodynamics of tilt rotor aircraft in conversion mode based on embedded grid and actuator model

A method combining rotor actuator disk model and embedded grid technique is presented in this paper, aimed at predicting the flow fields and aerodynamic characteristics of tilt rotor aircraft in conversion mode more efficiently and effectively. In this method, rotor's influence is considered in terms of the momentum it impacts to the fluid around it; transformation matrixes among different coordinate systems are deduced to extend actuator method's utility to conversion mode flow fields' calculation. Meanwhile, an embedded grid system is designed, in which grids generated around fuselage and actuator disk are regarded as background grid and minor grid respectively, and a new method is presented for ‘donor searching' and ‘hole cutting' during grid assembling. Based on the above methods, flow fields of tilt rotor aircraft in conversion mode are simulated, with threedimensional Navier–Stokes equations discretized by a second-order upwind finite-volume scheme and an implicit lower–upper symmetric Gauss–Seidel(LU-SGS) time-stepping scheme. Numerical results demonstrate that the proposed CFD method is very effective in simulating the conversion mode flow fields of tilt rotor aircraft.