Response of the lower atmosphere to intense geomagnetic storms

In this short paper we examine the possible connection between atmospheric parameters measured at low and middle altitudes and geomagnetic storms occurred in 2000 and 2003. For that, from a chain of stations located near the meridian 60°W we compare the storm time values of temperature and wind speed with their standard deviation 2σ obtained from quiet time values. We observed statistically significant variations at several altitudes during the storm recovery phase and after it, both in neutral wind speed and temperature. The results obtained suggest that atmospheric parameters could be affected by geomagnetic storms.     

复合涂层刀具钻削高温合金Inconel 718钻削性能研究

高温合金Inconel 718是一种典型的难加工材料,本文利用DEFORM-3D软件对无涂层、TiC单涂层和TiC/Al₂O₃复合涂层硬质合金刀具进行钻削高温合金Inconel 718的仿真分析,研究在不同钻削条件下复合涂层刀具的切削性能,并进行钻削实验进行验证。结果表明：TiC/Al₂O₃复合涂层刀具能有效降低钻削轴向力和钻削温度,其轴向力降低幅度最高为20%,钻削温度最高降低了35%。通过钻削实验验证了仿真模型的准确性,可为实际钻削加工高温镍基合金Inconel 718中选择涂层种类及钻削参数提供参考。     

Water surface temperature estimation from Landsat 7 ETM+ thermal infrared data using the generalized single-channel method: Case study of Embalse del Río Tercero (Córdoba,Argentina)

Monitoring of warm distribution in water is fundamental to understand the performance and functioning of reservoirs and lakes. Surface water temperature is a key parameter in the physics of aquatic systems processes since it is closely related to the energy fluxes through the water–atmosphere interface. Remote sensing applied to water quality studies in inland waterbodies is a powerful tool that can provide additional information difficult to achieve by other means. The combination of good real-time coverage, spatial resolution and free availability of data makes Landsat system a proper alternative. Many papers have developed algorithms to retrieve surface temperature (principally, land surface temperature) from at-sensor and surface emissivity data. The aim of this study is to apply the single-channel generalized method (SCGM) developed by Jiménez-Muñoz and Sobrino (2003) for the estimation of water surface temperature from Landsat 7 ETM+ thermal bands. We consider a constant water emissivity value (0.9885) and we compare the results with radiative transfer classic method (RTM).     

燃烧室燃烧与排放特性试验与数值计算

为了探寻燃烧室进口空气温度、压力以及油气比对点熄火边界、温升、燃烧效率以及主要排放物摩尔分数的影响规律， 对航空发动机燃烧室在多工况下的点熄火特性、出口温度分布与主要排放物摩尔分数进行了试验测试。分别采用正癸烷的简化 反应机理与C 12 H 23 燃料的单步反应机理，对该燃烧室火焰筒内流场结构、温度场、中间组分与主要排放物摩尔分数分布特性进行了 数值计算，并与相应试验数据进行了对比分析。结果表明：随着燃烧室进口空气温度、压力以及油气比的提高，燃烧室燃烧效率、 温升、出口平均温度与NO X 摩尔分数逐渐提高，而UHC与CO摩尔分数逐渐降低；与采用C 12 H 23 燃料单步反应机理相比，采用正癸 烷的简化反应机理计算得到的火焰筒内流场与温度场分布更为合理，火焰筒出口温度场分布以及主要排放物摩尔分数与相应试 验数据更为接近，计算精度得到较大提高。     

基于DLMS技术粉末烧结参数优化控制系统分析

从激光系统、扫描系统、粉末系统对直接激光金属烧结参数进行了分析,数值模拟了金属粉末烧结温度场,并结合γ'相析出强化相强化机理分析,建立了烧结参数优化控制模型,为烧结参数优化提供了理论基础;在此基础上提出了实时性烧结参数优化控制系统的雏形.     

Latent heat flux and air temperature anomalies along an active fault zone associated with recent Iran earthquakes

Pre-earthquake physical and chemical interactions in the earth’s ground may cause anomalies in latent heat flux, air and surface temperature. Earthquakes occur when the energy accumulated in rocks releases. Sometimes, the movements of the ground cause ruptures in the earth’s surface and sometimes the two sides of an existing fault shift towards each other. In a structurally complex and inhomogeneous collision region such as the Iranian Plateau, seismicity is not the result of activity of a single fault but is due to energy discharge in fault zones hundreds of kilometers wide.     

复合材料机体结构选用树脂体系的探讨

由于复合材料的优点如此之多，复合材料的应用日益广泛，但在具体设计时应选用何种固化温度的树脂体系人们有不同的见解，本文将结合工程设计体会作些探讨。     

高温下直流电位法测量裂纹长度的应用

介绍了直流电位法测量疲劳裂纹长度方法的基本原理、实现方法、及所需配置的仪器,并对有关影响因素作了分析.该测量系统主要用于在高温下测量各种材料在恒幅载荷下的疲劳裂纹扩展和门槛值试验中的疲劳裂纹长度,可以提高测量疲劳裂纹长度的自动化水平.     

EUV Observations Above Polar Coronal Holes

We derive electron temperature and density as a function of height up to 0.2 R_⊙ above the limb in polar coronal holes, using five EUV data sets recorded by the SOHO Coronal Diagnostic Spectrometer between July 1997 and February 1998. Radial T and N distributions, averaged in a 2° to 10° range of position angles, are the same above the North and South coronal holes. They do not show any time variability over a period of seven months. Polar plumes are found to have lower electron temperature and higher density than the interplume lanes. The electron density slope suggests that the proton temperatures are twice as high as the electron temperatures. This revised version was published online in June 2006 with corrections to the Cover Date.     

建筑物温度场红外测试的研究

研究了采用红外热像图快速测试建筑物外表面温度场的方法，提出了一种基于信息融合的修正方法。