Evaluation of a regional real-time precise positioning system based on GPS/BeiDou observations in Australia

The performance of real-time (RT) precise positioning can be improved by utilizing observations from multiple Global Navigation Satellite Systems (GNSS) instead of one particular system. Since the end of 2012, BeiDou, independently established by China, began to provide operational services for users in the Asia-Pacific regions. In this study, a regional RT precise positioning system is developed to evaluate the performance of GPS/BeiDou observations in Australia in providing high precision positioning services for users. Fixing three hourly updated satellite orbits, RT correction messages are generated and broadcasted by processing RT observation/navigation data streams from the national network of GNSS Continuously Operating Reference Stations in Australia (AUSCORS) at the server side. At the user side, RT PPP is realized by processing RT data streams and the RT correction messages received. RT clock offsets, for which the accuracy reached 0.07 and 0.28?ns for GPS and BeiDou, respectively, can be determined. Based on these corrections, an accuracy of 12.2, 30.0 and 45.6?cm in the North, East and Up directions was achieved for the BeiDou-only solution after 30 min while the GPS-only solution reached 5.1, 15.3 and 15.5?cm for the same components at the same time. A further improvement of 43.7, 36.9 and 45.0 percent in the three directions, respectively, was achieved for the combined GPS/BeiDou solution. After the initialization process, the North, East and Up positioning accuracies were 5.2, 8.1 and 17.8?cm, respectively, for the BeiDou-only solution, while 1.5, 3.0, and 4.7?cm for the GPS-only solution. However, we only noticed a 20.9% improvement in the East direction was obtained for the GPS/BeiDou solution, while no improvements in the other directions were detected. It is expected that such improvements may become bigger with the increasing accuracy of the BeiDou-only solution.     

一种叶片截面线光顺及等距面生成方法

采用等距面生成球头刀加工刀具轨迹是曲面加工中一种常用的方法。但是,在对叶身曲面进行等距偏置时,经常出现无法偏置的问题。针对该问题,分析了曲面偏置自相交原因,并根据叶片类零件叶身曲面的特点,提出了一种叶身截面线光顺及等距面生成方法。该方法首先采用Kjellander方法将原始截面线进行自动光顺,然后根据光顺后的原始截面线和数据采样法构造偏置截面线,最后通过截面线放样法构造叶身曲面等距面。实例表明,采用Kjellander方法可以实现叶片曲面的自动光顺和叶片曲面等距面的构造。     

导风轮叶片偏置对高压比串列离心压气机性能的影响

为提升高压比串列离心压气机的性能,借鉴常规一体化离心叶轮中偏置分流叶片的方法,针对某高压比串列离心压气机,应用数值仿真手段分析了串列叶轮中导风轮叶片周向偏置对压气机流场和性能的影响。通过对不同导风轮叶片偏置方案下压气机流场的分析,建立了压气机流动损失与偏置参数的关联性。研究表明:采用较大的偏置参数γ可降低导风轮叶片1前缘的激波强度,改善激波作用导致的泄漏涡破碎和流动分离,但过大或过小的γ方案中导风轮叶顶会出现二次泄漏致使低能流体的掺混损失增加;γ=65%方案压气机综合性能最佳,其压比和效率较γ=50%分别提高了1.5%和1.4%;对于串列离心压气机导风轮叶片周向位置的优化,在避免导风轮叶顶形成较强二次泄漏的前提下,应考虑采用较大的偏置参数γ,同时应防止诱导轮尾迹流体参与导风轮的叶顶泄漏。     

大型星载天线桁架式可折展机构的模态分析

大型空间抛物柱面星载天线具有口径大、约束弱、刚度低、质量小等特点,其机构的空间稳定性直接决定天线的使用寿命和信息传输的可靠性。为准确获得大型空间星载天线在轨稳定性能参数,依据星载天线的高精度和长寿命的设计需求,提出一种新型抛物柱面星载天线结构形式,利用有限元仿真对该新型星载天线作模态分析,并分析相关参数。结果表明:采用Al7075材料的新型抛物柱面星载天线基频满足设计要求。同时,增加上下支杆和上下斜撑杆的截面尺寸可有效提高天线结构的固有频率。该研究为我国大型抛物柱面星载天线设计提供了理论支撑和技术参考。     

前飞速度和升力偏置量对共轴刚性旋翼气动特性影响分析

共轴刚性旋翼前飞状态的气动特性主要由工况环境中的来流速度、密度和桨叶的翼型配置、弦长分布和扭转分布等气动布局参数决定。气动布局参数的综合影响决定了共轴刚性旋翼的的升力偏置量。了解前飞速度和升力偏置量对前飞性能的影响规律有利于设计更适合于高速飞行的共轴刚性旋翼。因此,本文通过求解可压雷诺平均N-S(Reynolds-averaged Navier-Stokes,RANS)方程对4 m直径的由两副2片矩形桨叶旋翼构成的共轴刚性旋翼模型的前飞流场进行了数值模拟,获得了不同前进比下的气动力并对不同升力偏置量下的旋翼性能进行了对比。数值模拟结果表明,随前进比增大,桨叶展向拉力分布更加趋于合理,拉力中心向桨叶中段移动,可以充分给桨尖卸载;旋翼升力主要由前行侧桨叶提供,升力偏置量过大容易产生激波诱导失速,不利于高速前飞。     

腹下无隔道大偏距跨声速S弯进气道气动特性的实验研究(英文)

An investigation on the ventral diverterless high offset S-shaped inlet is carried out at Mach numbers from 0.600 to 1.534, angles of attack from -4° to 9.4°, and yaw angles from 0° to 8°. Results indicate： （1） a large region of low total pressure exists at the lower part of the inlet exit caused by the counter-rotating vortices in the S-shaped duct; （2） the performances of the inlet at Mach number 1.000 reach almost the highest, so the propulsion system could work efficiently in terms of aerodynamics; （3） the total pressure recovery increases slowly at first and then remains unvaried as the Mach number rises from 0.6 to 1.0, however, it does in an opposite manner in the conventional diverter-equipped S-shaped inlet; （4） the performances of the inlet are generally insensitive to angles of attack from -4° to 9.4° and yaw angles from 0° to 8° at Mach number 0.850, and angles of attack from -2° to 6° and yaw angles from 0° to 5° at Mach number 1.534.     

基于域分解的双模式PE

高频近似算法的误差比抛物方程(PE)大,叠加PE计算不能反映同频干扰,对流层电波传播计算域内存在不同的电波传播机制。文章提出了域分解双模式PE,将计算域分解为海洋或地形上的阻抗边界域和空间传播域,分别采用DMFT和SSFT求解。交叠区域实现了电波在两域间的互相传播,并避免了边界截断产生反射。与功率叠加PE相比,反映了多源电波间的矢量叠加,并降低了一半的计算量。在标准大气单源、蒸发波导双源条件下的数值试验验证了方法的正确性和有效性。     

受限空间中天线产生的电波覆盖研究

受限空间中的有效电波覆盖直接影响通信质量和可靠性,对天线系统的布局优化尤为重要.然而现有的研究很少考虑本来就处于隧道中的天线参数对电波覆盖的影响.针对铁路隧道这种特殊的受限空间情况首先介绍了电波覆盖的研究方法和现状,然后利用射线追踪方法、波导模式方法和矢量抛物方程方法对电波覆盖进行了预估,针对笔形方向图的特征采用高斯方向图重点研究了不同的天线主瓣宽度、波束指向以及在隧道截面的位置对电波覆盖的影响,分析了沿隧道轴向不同区域内电波覆盖的不同特征,最后研究了受限空间中电波覆盖的三段式模型.本文的方法和模型可以为隧道内的天线选型及优化布局提供理论依据和参考.      

基于加权鉴别函数的二进制偏移载波信号跟踪方法

在移除二进制偏移载波（Binary Offset Carrier,BOC）信号跟踪模糊的同时,为了保持BOC信号高的码跟踪精度,提出基于加权鉴别函数（Weighted Discriminator Function,WDF）的BOC信号无模糊跟踪方法。WDF使用非相干超前减滞后功率（Noncoherent Early Minus Late Power,NELP）鉴别器和子载波相位消除（Sub Carrier Phase Cancellation technique,SCPC）鉴别器,生成无误锁点的鉴别函数实现BOC信号跟踪。针对BOC(10,5)信号,仿真结果表明,相比于SCPC、基于伪相关函数的无模糊延迟锁定环（Pseudo correlation function based Unambiguous Delay Lock Loop,PUDLL）方法和对称脉冲模糊移除（Symmetrical Pulse Ambiguity Removing,SPAR）方法,所提WDF方法在码跟踪误差方面分别改善了2.5dB、5.5dB与8.3dB,多径误差分别降为60.4%、32.8%与38.0%。因此,WDF是一种有效的、高性能的BOC信号无模糊跟踪方法。     

磁悬浮径向球面纯电磁磁轴承的设计

针对柱面磁轴承偏转时干扰力矩较大问题,本文提出一种径向球面纯电磁磁轴承设计方法。在本设计中,当磁轴承产生偏转或偏移时,电磁力会指向转子球心,从而降低定子磁极对转子产生的干扰力矩,提高磁轴承的控制精度。首先,阐述球面磁轴承的工作原理并建立数学模型,运用等效磁路理论方法和有限元数值方法分析其电流刚度和位移刚度,2种方法的计算结果基本吻合,表明球面磁轴承的有限元分析模型是合理的。接着,运用有限元方法分析球面磁轴承和柱面磁轴承产生偏转时的干扰力矩,结果表明当转子达到最大偏转角0.3°时,球面磁轴承的干扰力矩是柱面磁轴承的干扰力矩的1.8%,表明球面磁轴承相对于柱面磁轴承在抗干扰力矩能力方面有很大的提高。最后,进一步分析球面磁轴承产生X方向或Z方向偏移时的干扰力矩,计算结果与偏转时干扰力矩的量级相当。综上所述,本文提出的径向球面纯电磁磁轴承有低干扰力矩的优点,可用于航天航空工程中惯性执行机构的高精度控制和角速率检测。