The development of a Russian communication satellite of small class, operating in the geostationary and high-elliptical orbits

In 1994-1995 Lavochkin Association (Russia) together with the other enterprises in accordance with technical requirements of the Russian Space agency, developed a new Russian communication satellite of a small class that will operate in both the geostationary (GSO) and high-elliptical (HEO) orbits. This satellite may be injected into operational orbits using a SOYUZ-2 launch vehicle (LV) and a FREGAT upper stage (US) from Plesetsk and Baykonur space launch sites (SLS).The main reason for creating such a satellite was to decrease the cost of the support and development of the Russian communication geostationary satellites group.Russian satellites Horizont, Express, Ekran and Gals, which operate in GSO, are the basis of the space segment for communications, radio and TV broadcasting. All of these satellites are injected into GSO by the PROTON LV. PROTON is a launch vehicle of a heavy class. The use of a middle class LV instead of a heavy class will allow to reduce considerably the launch cost. The change of a heavy class LV to a LV of middle class determined one economic reason for this project. Besides, the opportunity to launch S/C into GSO from Russian Plesetsk SLS increases the independence of Russia in the domain of space communications, despite the presence of the contract with Kazachstan about the rent of Baykonur SLS. Finally, use of small satellites with a rather small number of transponders is more effective than the use of big satellites. It will allow also to increase a satellite group (by the launch of additional satellites) precisely in accordance to the development of the ground segment.     

Numerical Simulation of Impact Loading on Solid Propellant Within an Orthotropic Shell

The strain–stress state of the solid propellant rocket engines (SPREs) is simulated under impact. The effect of orientation of elastic and strength properties of orthotropic organoplastic shell material on the strain–stress state of the solid propellant is investigated. Normal and oblique impact of single steel cylinder projectiles, both simultaneous and at different times of multiple, converging steel spheric particles with SPRE are investigated in this study. The investigation is conducted numerically. The numerical modeling was carried out in a three-dimensional formulation by the method of finite elements for the continuous approach of the mechanics of a deformable solid. The destruction of the anisotropic material is described by the tensor-polynomial criterion of the fourth degree, which takes into account the influence of hydrostatic pressure.     

具有衬里的纤维缠绕压力容器分析

给出了具有衬里的纤维缠绕压力容器纤维厚度的设计计算方法。当容器的结构一定时，给出了确定爆破压强的方法。     

平板缝隙溅击喷嘴冷流混合特性

作为变推力液体火箭发动机上环形缝隙式喷嘴基本特性研究的一部分,本文研究了溅板的加入,以及溅板几何尺寸的改变对喷雾场冷流混合特性的影响。结果表明,溅板的加入改善了流强与混合比分布。溅击角的增大和合成膜在溅板上撞击线的内移不同程度地提高了E_m值。合理的设计和准确控制喷注参数可以获得满意的流强与混合比分布。     

斜切反喷管流场的数值模拟

为了在级间分离期间提供反推力，许多固体火箭发动机前端都装有一组斜切反喷管。由于反喷管的气动型面具有许多尖点，并且在超声速区有一个台阶，喷管内存在一系列激波，而且亚声速区和超声速区互相混杂。本文用时间相关法数值模拟了反喷管流场，控制议程用Ｍａｃ Ｃｏｒｍａｃｋ显格式求数值解，边界参数采用物理边界条件和从双特征线方法推导来的有效的特征方法为计算，为于固壁边界点，在不同的区域采用不同的方法对计算方程组求     

扩张管和燃料部分填充对PDE效能的影响

采用基于有限速率基元化学反应模型的网格自适应有限体积方法,数值模拟以脉冲爆轰发动机为背景的爆轰波通过扩张喷管的流场,研究了喷管形状及喷管充气状况对脉冲爆轰发动机推进性能的影响。结果表明,氢-氧混合物产生爆轰波的等截面爆轰管冲量在某一比例合适的部分填充时达到最大,而对较大扩张角的喷管来说,其冲量一般随喷管内可燃气体填充比例的增加而增加,比冲通常随可燃气体填充比例的减少而增加;合适的喷管和燃料填充系数能使比冲显著提高。     

天地往返运输系统空气喷气组合式发动机方案探讨

本文初步探讨了用作天地往返运输系统推进装置的组合发动机,估算了其性能、尺寸、重量以及使用这些发动机时的运载能力。     

自吸气脉冲爆震发动机超声速进气道气动性能的数值研究

采用有限体积法计算了某轴对称超声速进气道,在不同幅度和频率的出口扰动压强下的进气道内结尾正激波的运动情况,得出了进气道内结尾正激波运动特性和扰动压强的频率和幅度的关系。在计算中,本文采用了多块结构化网格,控制体积的界面无粘通量采用三阶迎风格式插值获得,同时采用了minmod通量限制器,以确保在激波处的解的物理特性;扩散通量采用二阶中心差分格式插值获得。定常计算采用当地时间步法,非定常计算采用双时间步法。离散的代数方程采用交替方向迭代法求解。     

基元化学反应一维爆轰波的数值模拟

应用基元化学反应模型对一维氢氧混合气体爆轰波进行数值模拟。采用一端高温高压点火起爆的方式,模拟爆轰波的传播。对一维爆轰波的结构、传播特征以及各个化学组分的变化趋势进行了研究。通过将模拟的结果同国内外的研究结果进行对比,发现了一些规律,为多维爆轰波的数值模拟和脉冲爆轰发动机的研究奠定一定的基础。     

用运载器评价发动机方案的方法

早期在对液体推进剂火箭发动机方案进行评价与选择时,仅以发动机本身的指标(如比冲、推重比等)作为方案比较的标准。这样没有考虑发动机子系统与运载器总系统的相互联系,得不到合理的评价结果。液体推进剂火箭发动机是航天运载器的一个子系统,采用运载器的性能指标评价发动机方案才能得到比较客观的结果。 本文推导了运载器的评价指标,给出了运载器的线性化质量方程,阐述了运载器设计参数的简化确定方法,由此提出了一个采用运载器评价发动机方案的方法。最后应用提出的方法对五个发动机方案进行了评价。