复杂结构模压模具的加工方法

分析了模压模具结构形状上的特点和其空间角度及尺寸加工上的难点,由于该模具结构形状复杂,加工精度要求高,其空间角度和尺寸在普通设备加工保证较为困难。重点阐明了利用现有的普通加工设备,采取相应的工艺方案来保证模具工件的空间角度及尺寸的加工方法。     

空间环境模拟器热沉热辐射当量吸收特性研究

文章采用蒙特卡罗法模拟射线的传输过程,分别对两种热沉形式的热辐射当量吸收系数进行了数值计算,研究了表面形式、几何高度及入射光线方向等参数对表面热辐射当量吸收系数的影响。计算表明,正六边形凹腔形式的吸收效果远好于正四棱锥形式,但这种结构形式的吸收有明显的方向性,正四棱锥形式对光线的吸收呈现各向同性。     

太空防御问题研究

空间战略对抗中的太空防御问题越来越引起人们的关注。主要介绍了美国太空防御的发展动态,分析了太空防御的技术特点。对太空防御技术的发展提出一些思考。     

KM6水平舱综合复压系统设计与仿真分析

综合复压系统是载人地面试验设备的重要分系统之一,主要用于载人试验一旦出现重大故障和事故时,对试验舱进行紧急复压,让舱体迅速恢复到正常大气压力环境。文章介绍了KM6水平舱综合复压系统的流程设计;对系统的紧急复压能力进行了数值计算和仿真分析,其结果与系统调试结果基本吻合。表明仿真模型的建立及分析正确可信,综合复压系统流程设计能够满足设计要求。     

多学科仿真在复杂设备系统设计中的应用

通过对复杂设备多学科特性的物理建模和系统集成,实现了对复杂设备整体性能的定量仿真,解决了复杂设备整体功能难以预测的设计难题。文章对多学科仿真及其常见方法作了简要介绍,并以其在几种复杂设备设计中的应用为例,展现了多学科仿真的工程应用价值。     

大跨悬挑屋盖风压分布风洞试验分析

通过大跨悬挑曲面屋盖刚性模型风洞试验,分析各风向角风压系数均值等值线图及跨中区域时体型系数以确定最不利风向角,研究跨中迎风边缘及顺风测点功率谱及相干特性,最后针对跨中不同位置测点风压概率分布密度特性探讨峰值因子合理取值。     

基于线性稳定性理论的转捩控制试验

 使用线化稳定性理论研究了某后掠机翼试验模型在风洞试验条件下可能的试验结果。在当前试验条件下,三维边界层中横流驻波的不同波长扰动发展趋势不同,根据理论分析和数值计算给出了最大放大率波长为4.0 mm。通过升华法试验验证了理论分析与数值计算结果。在试验中使用丝网印刷技术在后掠机翼前缘添加粗糙带,成功地引入了理论计算的最大放大率波长。根据预期影响了三维边界层的转捩。     

圆极化天线在远场条件下的测试方法

在微波暗室远场条件下,设计了一种利用线极化天线测量圆极化天线的方法.基于圆极化波的分解理论,利用线极化天线进行两次正交测量,所得结果通过公式换算,得到圆极化天线的方向性图和增益.通过多次对圆极化天线进行实际测试,验证了此方法的有效性,满足了实际应用的需要.     

Comparative assessment of human–Mars-mission technologies and architectures

We compare a variety of mission scenarios to assess the strengths and weaknesses of options for Mars exploration. The mission design space is modeled along two dimensions: trajectory architectures and propulsion system technologies. We examine direct, semi-direct, stop-over, semi-cycler, and cycler architectures, and we include electric propulsion, nuclear thermal rockets, methane and oxygen production on Mars, Mars water excavation, aerocapture, and reusable propulsion systems in our technology assessment. The mission sensitivity to crew size, vehicle masses, and crew travel time is also examined. Many different combinations of technologies and architectures are applied to the same Mars mission to determine which combinations provide the greatest potential reduction in the injected mass to LEO. We approximate the technology readiness level of a mission to rank development risk, but omit development cost and time calculations in our assessment. It is found that Earth–Mars semi-cyclers and cyclers require the least injected mass to LEO of any architecture and that the discovery of accessible water on Mars has the most dramatic effect on the evolution of Mars exploration.     

Autonomous navigation of formation flying spacecrafts in deep space exploration and communication by hybrid navigation utilizing neural network filter

Autonomous navigation of spacecrafts is a difficult task, however, which is a must in future deep space exploration. With multiple spacecrafts flying in space, this aim can be achieved by formation flying spacecraft (FFS) utilizing inverse time difference of arrival (ITDOA) and inverse difference Doppler (IDD) methods, which can locate the position of earth-station from one-way uplink signals in the FFS coordinate, and by way of conversion of coordinates, the position of FFS is achieved in earth-centered earth-fixed (ECEF) coordinate. The ability of neural network (NN) filter in navigation to extract position of spacecrafts from random measuring noise of signal arrival time and Doppler shift is studied with different radius of FFS and surveying parameters. The NN filter used by spacecraft group is new way of unidirectional autonomous navigation and is of high precision of hybrid navigation.