基于混沌变量的航空发动机性能监控与故障诊断

针对在利用综合加权法计算表征发动机整体性能的综合指数时,各参数的权系数难于确定,本文提出利用混沌变量确定各参数的权系数,使优化得到的综合指数值比采用专家调查法所得到的综合指数值更能灵敏、准确地反映发动机整体性能的变化情况,提高了发动机性能正常与否的识别率,并以此来发现发动机潜在早期故障,防止故障的扩大。通过对某型涡扇发动机进行监控,证明该方法确实有效。      

非侵入式电机能效在线监测系统软件设计

电机是工业系统中的主要动力输出和耗电设备,发展电机节能和在线监测技术具有重要意义。主要介绍了非侵入式电机能效监测软件系统的组成、设计方法和实现的功能,通过对电机运行状态信息的采集和分析,实现了对电机转速、转矩、功率因数、效率等运行参数的在线监测,并对监测结果进行分析,为电机能源管理提供支持。利用C#编程完成串口通讯,labview8.5完善监控界面,SQL server 2005建立电机监控数据库。实验结果表明该系统运行可靠,操作简单,安全性高。     

Modeling and control for cooperative transport of a slung fluid container using quadrotors

In this paper, dynamic modeling and control problem for transfer of a sloshing liquid container suspended through rigid massless links from a team of quadrotors are investigated. By the proposed solution, pose of the slung container and fluid sloshing modes are stabilized appropriately. Dynamics of the container-liquid-quadrotors system is modeled by Euler-Lagrange method. Fluid slosh dynamics is included using multi-mass-spring model. According to derived model, a proper control law is designed for a system with three or more quadrotors. Implementing the proposed control law, quadrotors can control pose of the container, directions of the links and liquid sloshing modes simultaneously. Stability of closed loop system of tracking errors and sloshing modes are demonstrated using a theory of singularly perturbed systems and Lyapunov stability theorem. Also, the capability of the proposed feedback control laws in solving a formerly organized transport problem of a liquid filled container has been demonstrated in simulations. Moreover, priority of the proposed control scheme to an existing slung load controller in the literature is demonstrated.     

基于光纤传感器的SRM界面黏接应力监测

界面黏接应力是SRM(固体火箭发动机)药柱结构完整性重要方面,也是健康监测的重要参数。为实现对黏接应力实时在线监测,设计了一种聚合物封装的FBG(光纤布拉格光栅)传感器,将其埋入HTPB(hydroxyl-terminated polybutadiene)推进剂/衬层界面黏接试件中。通过对试件在受到拉应力作用下FBG传感器反射光谱的模拟和应力响应测试试验研究了FBG传感器对应力响应规律。结果表明:FBG传感器中心波长随着试件的拉应力增大而减小,线性度较好,且传感器具有较高的灵敏度和稳定性。试件黏接性能测试试验中,FBG传感器性能保持完好,黏接试件强度满足技术指标,验证了传感器封装和埋入方式的可行性。      

基于TEC的空间站末端回路温控系统建模及其热力学性能分析

针对空间站中间回路温度波动过大,高温时导致科学载荷工作温度超出允许范围的问题,设计了一种基于热电制冷器(TEC)的末端单向流体回路温控系统。该系统包含一个TEC温控模块,当中间回路温度过高,末端回路冷却功率不足时,该模块可提供额外的制冷量,降低流入冷板的工质温度,形成针对科学载荷的相对低温区域,恢复回路的冷却能力。分别建立了温控系统数学模型与数值仿真模型,并完成了热负载扰动、中间回路温度扰动、末端回路流量扰动和并联支路热扰动等4种扰动对系统热力学特性影响的仿真分析,验证了TEC模块的温控性能。结果表明:在科学载荷发热功率增加30%、中间回路的温度升高5K、末端回路流量减小至0.0015kg/s等多种工况下,所设计的温控系统能够将载荷温度控制在1K以内,实现科学载荷精确温控。      

反推力装置运动学与动力学仿真

为了研究叶栅式反推力装置各部件在工作过程中的运动学与动力学特性,根据机构运动原理对反推力装置进行简化并建立了运动学与动力学数学模型。以滑动整流罩位移与阻流门所受气动负荷为输入进行运动学与动力学仿真,得到了反推力装置各部件的位移、速度及受力特性曲线,并对比分析了在不同尺寸参数下各部件特征点的运动轨迹和反推力装置负载力变化。结果表明:运动学及动力学仿真结果与工程实际相符;反推力装置机构参数选择不合理时,各设计点会发生干涉现象并导致机构无法运动;机构参数变化对负载力最大值影响尤为突出,在阻流门AC段长度值增大6%,阻流门CB段长度值减小9%的情况下,负载力正向最大值将增大19.53%,负向最大值增大12.67%。研究方法及研究结果可为反推力装置运动学及动力学分析,以及为反推力装置机构优化设计提供参考。      

航空发动机作动筒的伺服控制建模与分析

针对典型航空发动机阀控不对称作动筒的结构在带负载工况下的应用和理论分析情况,讨论了作动筒正、反向负载对伺服作动控制的影响,提出了1种阀控不对称作动筒的伺服控制系统建模与分析方法。将该方法在项目案例上的分析结果与实际项目试验数据进行对比,结果表明:该方法切实可靠,模型置信度高,对实际应用具有指导意义。同时,为了使作动筒往返控制效果一致,作动筒负载方向应设计为反向负载,负载力大小应设计在FL0附近。     

移15°双十二相隐极同步整流发电机数学模型的研究

分别在abc坐标系和dq0坐标系下建立了移15°双十二相隐极同步整流发电机的基本数学方程,推导了电机电压、磁链、输出功率、电磁转矩和转子运动方程。在MATLAB/Simulink中建立了移15°双十二相隐极同步整流发电机的仿真模型。对两路输出进行了不平衡负载仿真和试验。仿真与试验结果相比基本一致,验证了移15°双十二相隐极同步整流发电机数学模型的正确性。这为双十二相同步整流发电机运行性能和励磁控制系统的研究奠定了基础。     

基于全过程移动监督技术的感应电机定子绕组温度实时监测系统

随着物联网技术的发展,如何将物联网技术与非侵入式电力设备运行状态监测技术相结合成为当前研究热点之一。为了探索基于物联网技术的电气设备运行状态监测新模式,以感应电机定子绕组温度的非侵入式在线监测为出发点,首先提出了一种基于自适应法和最小二乘法的电机定子绕组温度辨识方法,并结合当前物联网技术的发展,设计了一种基于全过程监督技术的感应电机全寿命周期监督定子温度监测系统。以1台5.5 kW感应电机为例进行试验验证,结果表明该系统具有较强的鲁棒性。所提出的理念和技术可以为其他大型电力设备的状态监测提供重要参考和技术支撑。     

Fault diagnosis based on measurement reconstruction of HPT exit pressure for turbofan engine

Aero-engine gas path health monitoring plays a critical role in Engine Health Management(EHM). To achieve unbiased estimation, traditional filtering methods have strict requirements on measurement parameters which sometimes cannot be measured in engineering. The most typical one is the High-Pressure Turbine(HPT) exit pressure, which is vital to distinguishing failure modes between different turbines. For the case of an abrupt failure occurring in a single turbine component, a model-based sensor measurement reconstruction method is proposed in this paper. First,to estimate the missing measurements, the forward algorithm and the backward algorithm are developed based on corresponding component models according to the failure hypotheses. Then,a new fault diagnosis logic is designed and the traditional nonlinear filter is improved by adding the measurement estimation module and the health parameter correction module, which uses the reconstructed measurement to complete the health parameters estimation. Simulation results show that the proposed method can well restore the desired measurement and the estimated measurement can be used in the turbofan engine gas path diagnosis. Compared with the diagnosis under the condition of missing sensors, this method can distinguish between different failure modes, quantify the variations of health parameters, and achieve good performance at multiple operating points in the flight envelope.