7075Al/SiCp复合材料热压缩变形的研究

采用圆柱试样在Gleeble-1500热模拟机上对7075Al／SiCp复合材料进行高温压缩变形实验，变形温度为300-500℃，应变速率为0．001-1s^-1。结果表明：7075Al／SiCp复合材料的流变应力大小受变形温度和应变速率的强烈影响，流变应力随应变的增加而逐渐增加，出现一峰值后逐渐下降；流变应力随变形温度的升高，应变速率的降低而降低。可用Zener—Hollomon参数的双曲正弦形式来描述7075Al／SiCp复合材料高温压缩变形流变应力，其变形激活能Q为279．659KJ/mol。     

目标机动条件下的定点伴飞控制方法研究

对目标机动条件下的定点伴飞控制进行了研究。根据相对运动关系,建立适于伴飞模式的相对运动方程,将目标机动大小作为未知量加入相对运动方程,构建不确定系统。用LQR和Lyapunov法结合的方式设计相应定点伴飞控制律。理论证明了在目标机动时该控制律仍能实现系统的渐近稳定。仿真结果验证了该控制律的有效性。     

基于数值模拟的孔构件挤压强化疲劳寿命预测

为研究飞机机身7050铝合金孔构件挤压强化后的疲劳增益,采用数值模拟与试验研究相结合的方法,对孔构件的挤压强化过程、疲劳加载过程、疲劳裂纹萌生和裂纹扩展过程进行研究。通过数值模拟探究了孔构件在不同状态下危险截面的应力分布和对应的疲劳行为,分析了残余应力场对疲劳性能的影响,探讨了残余应力与疲劳裂纹萌生和裂纹扩展的内在联系,建立了孔构件挤压强化疲劳寿命数值预测模型。结果表明：孔挤压强化引入的残余压应力可以减小孔构件在受载时孔壁最大拉应力,改变疲劳裂纹的萌生位置,抑制疲劳裂纹萌生和裂纹扩展,提高7050铝合金孔构件疲劳寿命近2倍,疲劳寿命数值预测模型误差在12%以内。     

航空发动机空气管路应力优化设计

针对航空发动机空气管路系统受载应力及应变过大的问题,对该系统进行3维全尺寸弹塑性分析,讨论了载荷加载过程对应力应变的影响;对应力较大部位采用结构分解方法建立优化模型,进行管路部件应力优化,获得三通结构尺寸优化结果;利用参数灵敏度分析结果选择合适的设计变量,建立系统管线优化模型,补偿热-位移载荷产生的附加应力。优化结果显示,最大总应力降低5.49%,附加载荷应力降低12.28%。验证了方法的有效性。     

Kink mode m = 1 in magnetic tube with discontinuous magnetic field

In this paper, we study conditions of realization and stability of kink modes with azimuthal wave numbers $m=\pm 1$ in cylindrical plasma flex with twisted magnetic field and homogeneous current along its axis. We assume permanent axial magnetic field both inside and outside the flex, surrounded by currentless plasma. Azimuthal magnetic field decreases inversely proportional to the distance from the boundary beyond the flex. We derived dispersion equations for stable and unstable modes in approximation of “thin” plasma flex. The analysis of equations has been provided for the case of discontinuous axial magnetic field on flex’s boundary. Conditions of propagation of wave modes have been defined. It was shown, that unstable modes can be implemented in certain interval of longitudinal wavenumbers. Results can be applied for the interpretation of solar magnetic tubes behavior, using measurements, provided by spacecrafts.     

Discrete time multiple spacecraft formation flying attitude optimal control in presence of relative state constraints

This paper addresses the challenge of synchronized multiple spacecraft attitude reorientation in presence of pointing and boundary constraints with limited inter-spacecraft communication link. Relative attitude pointing constraint among the fleet of spacecraft has also been modeled and considered during the attitude maneuvers toward the desired states. Formation fling control structure that consists of decentralized path planners based on virtual structure approach joint with discrete time optimal local controller is designed to achieve the mission’s goals. Due to digital computing of spacecraft’s onboard computer, local optimal controller based on discrete time prediction and correction algorithm has been utilized. The time step of local optimal algorithm execution is designed so that the spacecraft track their desired attitudes with appropriate error bound. The convergence of the proposed architecture and stability of local controller’s tracking error within appropriate upper bound are proved. Finally, a numerical simulation of a stereo imaging scenario is presented to verify the performance of the proposed architecture and the effectiveness of the algorithm.     

浅析重庆机场雷暴天气条件下的塔台管制指挥

重庆江北机场周围的地形复杂、空域有限,每年的3月至10月份是雷暴天气的频发期。本文以重庆空管分局塔台管制室的实际运行程序为基础,提出了一些在雷暴天气条件下管制指挥建议,在提高运行效率、降低管制运行风险等方面能起到较大作用。     

空中乘务专业双语教学初探

对空中乘务人员的素质要求越来越高,其中要求最高的就是在英语能力方面。本文基于在让乘务专业学生学习专业知识的同时,如何更有效地提高他们的英语水平,简要阐述了目前这方面教学的现状,分析了空乘专业的课程设置,并对如何实施双语教学提出了几点对策。     

吹吸扰动控制猝发过程中雷诺应力的实验

采用热线测速技术和双丝边界层热线探针,在风洞中以高于对应最小湍流时间尺度的分辨率,精细测量了平板湍流边界层施加不同频率周期性质量引射前后,不同流向和法向位置的瞬时流向、法向和展向速度分量的时间序列信号.采用流向脉动速度局部平均结构函数模极大值法检测了壁湍流猝发过程中拟序结构不同速度分量和雷诺应力分量的条件相位平均波形.发现在扰动源下游一定范围内,摩擦因数和雷诺应力幅值有所减小,扰动改变了法向或展向脉动速度与流向脉动速度的条件相位平均波形的相位差,使其保持在π/2的奇数倍左右,此时雷诺应力几乎为0,改变了湍流边界层原有雷诺应力的产生和扩散输运机制,抑制了湍流雷诺应力的产生和输运.