一种模拟整星热环境的小型单机热平衡试验

文章通过对一个典型的单机热分析和热试验的研究,提出了一种小型单机热平衡试验方法,模拟单机在整星环境下的热平衡试验,以避免只为验证其热设计而再次补做整星热平衡试验。为准确模拟单机在星内的辐射和导热过程,通过灰体间辐射热网络法和仪器安装板处单元体热平衡法,给出了等效辐射特征点和等效导热特征点的确定方法;并结合试验结果,对模型修正的合理性、局限性进行了分析,提出了在实际应用过程中应注意的问题。     

压电主动杆Maxwell动力学建模与鲁棒H∞控制研究(英文)

未来高性能航天器迫切需要基于压电作动的主动减振控制。针对压电作动器和检波器组成的主动杆系统,基于控制目的,推导了作动器Maxwell动力学模型,为了更好的反映检波器噪声和低频较差性能带来的影响,采用同价的SUITE动杆的系统辨识模型设计了H∞控制器,仿真结果表明H∞控制器对100Hz的正弦扰动有效隔离73% (11.4dB),对频带250Hz的白噪声有效隔离70%     

基于ADF4153的频率合成器设计

设计实现一种基于ADF4153的频率合成器,介绍该频率合成器的构成原理。结合测试结果对本频率合成器进行相位噪声性能分析和杂散分析,并提出相应的改善措施。利用软件仿真对环路的稳定性进行分析。测试及分析结果表明,本频率合成器相位噪声水平可达-96.59dBc@10kHz,杂散抑制大于45dBc,频率合成器环路工作稳定。     

背景噪声和脉冲干扰下的SDH误块性能

误码性能是光纤数字传输系统的重要性能指标,而通常光同步数字传输系统(SDH, Synchronous Digital Hierarchy)又以误块性能来衡量其误码性能.通过分析光同步数字传输系统在背景噪声(用泊松分布来描述)和脉冲干扰(用A型传染病分布来描述)影响下的系统误块性能,推导出了泊松分布和传染病分布下误块率的一般关系式.      

有声腔推力室的声学振型及其阻尼特性研究

为确定多声学模态压力振荡条件下带有1/4波长管声腔推力室的声学振型及其阻尼特性,揭示1/4波长管声腔对推力室压力振荡的抑制作用机理,对有声腔推力室和无声腔推力室进行近圆周壁面的定容弹激励仿真,激发了多模态的声学振型,给出了推力室压力分布的时空演化,并采用半带宽法定量评价每个激发声学振型的阻尼特性.结果表明:1/4波长管...     

低含气率影响下圆柱动静压轴承特性分析

为研究低含气率条件下,温度和气泡含量对润滑油黏度的影响,采用涡轮油和氮气制备油气两相流,在不同温度下采集含气率和动力黏度,拟合得到两相流的黏度计算模型.针对带有深浅腔的圆柱动静压轴承,基于拟合的黏度模型,结合有限元法和有限差分法联立求解油膜Reynolds方程、能量方程及两相流等效密度模型,分析了不同偏心率下承载力、摩...     

Operational modal parameter identification with colored noise excitation

Operational Modal Analysis (OMA) refers to the modal analysis of a structure in its operating state. The advantage of OMA is that only the output vibration signal of a system is used in the analysis process. Classic OMA is based on the white noise excitation assumption and many identification methods have been developed in both time domain and frequency domain. But in reality, many environmental excitations are not compliance with the white noise assumption. In this paper, a method of half power bandwidth analysis is applied to power spectrum analysis to deal with the colored noise and trapezoidal spectral excitation. The modal frequencies and modal damping ratios are derived and the error caused by trapezoidal spectral and colored noise excitation are analyzed. It is proved that the OMA algorithm based on the white noise assumption can be extended to the colored noise environments under certain conditions. Finally, a simulation example with a cantilever beam and a vibration test with four kinds of colored noise and trapezoidal spectrum base excitation are carried out and the results support the proposed method.     

一种涡轮发动机加速控制规律设计的新方法

 提出了一种涡喷、涡扇发动机加速控制规律快速设计的新方法：在发动机稳态特性计算模型的基础上,通过额外增加转子提取功率,使得发动机稳态工作点（线）靠近喘振边界,在同时考虑燃烧室富油熄火边界、涡轮进口总温限制以及压气机喘振裕度限制的条件下,利用适当的控制规律描述形式并结合发动机工程研制中的经验,能够快速而准确地获得涡喷、涡扇发动机加速控制规律。对某型涡喷发动机加速控制规律的改进的计算结果表明,提出的加速控制规律的设计方法准确而有效。     

一种改进的声反卷积相关声源定位方法

基于传声器阵列的声源定位算法的性能优劣决定了气动噪声试验检测中气动噪声源定位成像的准确性。为了提高相关声源定位方法的稳健性和准确性，提出一种改进的声反卷积相关声源定位方法——D-MACS（Developed-Mapping of Acoustic Correlated Sources）方法。该方法的特点是：在传统MACS方法的基础上，将声反卷积模型进行改进，使模型体现出声场空间扫描点声压互谱矩阵与互谱波束形成输出矩阵之间的数学关系，其最终获得的声源定位结果，能够提高MACS方法声源定位辨识的稳健性和准确性。通过仿真信号研究和声学风洞环境中的声源定位试验研究，比较了DAS（Delay And Sum beamformming）、DAMAS-C（Deconvolution Approach for the Mapping of Acoustic Correlated Sources）、MACS和D-MACS这4种方法的声源定位性能，验证了D-MACS方法在声源定位性能上的优势。     

An adaptive integration surface for predicting transonic rotor noise in hovering and forward flights

In this paper, a new permeable adaptive integration surface is developed in order to evaluate transonic rotor noise in accordance with FW-H_pds equations(Ffowcs Williams-Hawkings equations with penetrable data surface). Firstly, a nonlinear near-field solution is computed on the basis of Navier-Stokes equations, which is developed on moving-embedded grid methodology.The solution calculated through the present CFD method is used as the input for acoustic calculations by FW-H_pds equations. Then, two criteria for constructing integration surfaces are established based on the analysis of the quadrupole source strength and the nonlinear characteristic.A new surface is determined adaptively by the pressure gradient or density in a given flowfield,eschewing the uncertainties associated with determining cylinder-shaped integration surfaces. For varying hover cases, transonic noises are simulated with new integration surfaces for a UH-1 model rotor. Furthermore, numerical results of the new integration surface derived from the density perturbation value conform better to experimental data than results derived from the pressure gradient.Finally, the integration surface given by jrqj being 0.1, which is an applicable criterion obtained from hover cases, is used to predict transonic rotor noise in forward flight. The computational accuracy of the new integration surface method has been validated in predicting transonic rotor noise of an AH-1 model rotor at different advance ratios.