直纹面叶轮刀具轨迹规划的研究(英文)

At present, most commercial computer-aided manufacturing （CAM） systems are deficient in efficiency and performances on generating tool path during machining impellers. To solve the problem, this article develops a special software to plan cutting path for ruled surface impellers. An approximation algorithm to generate cutting path for machining integral ruled surface impellers is proposed. By fitting sampling data points of an impeller blade into a curve, a model of ruled surface blade of an impeller is built up. Furthermore, by calculating the points where the cutter axis vector intersects the free-form hub surface of an impeller, problems about, for instance, the ambiguity in calculation and machining the wide blade surface with a short flute cutter are solved. Finally, an integral impeller cutting path is planned by way of an integrated cutter location control algorithm. Simulation and machining tests with an impeller are performed on a 5-axis computer numerically controlled （CNC） mill machine, which shows the feasibility of the proposed algorithm.     

成形法加工的弧线齿面齿轮几何接触分析

研究了成形法加工的弧线齿面齿轮齿面接触分析及齿面修形.弧线产形齿条是由具有一定刀倾角的刀盘形成,用其推导展成加工的弧线齿圆柱齿轮和成形法加工的弧线齿面齿轮齿面方程,同时通过刀具抛物线齿廓对大轮齿面进行修形;在此基础上,建立了包括考虑安装误差在内的弧线齿面齿轮齿面接触分析(TCA)模型;最后通过算例的啮合性能分析,表明对大轮齿面修形可降低传动误差幅值和获得较好传动误差曲线,且该类传动装置对安装误差敏感性较低.      

太阳能硅片精密切割技术及其特性研究

本文在对当前太阳能硅片常见切割技术及其特性进行分析和比较的基础上,提出数控超声振动切割太阳能硅片技术,为太阳能硅片的精密切割提供一种新的实用的加工方法.     

单激励超声椭圆振动车削薄壁筒实验研究

通过对普通夹心式超声椭圆振动换能器结构的研究,设计了一种能够在单一纵向激励的情况下产生椭圆振动的换能器结构,利用有限元分析工具对换能器的结构进行分析,并且利用光纤测振仪对单一纵向激励换能器进行了测量,验证了可以通过单向激励产生椭圆振动。利用这种结构研制了一套单激励超声椭圆振动车削系统,采用PCD刀具对LY12实心件和薄壁筒工件进行了精密切削实验,实验结果表明椭圆振动切削可以大幅度降低切削力,明显改善薄壁工件的形状精度,同时工件还具有较好的表面粗糙度。     

Linear Shaped Charge Cutting Property and Charge Cutting Mechanism of Mg-Gd-Y-Zn Alloy

The linear shaped charge cutting technology is an effective technology for aircraft separation. It can separate invalid components from aircrafts timely to achieve light-weight. Magnesium alloy is the lightest metal material, and can be used to cast effective light-weight components of an aircraft construction. However, the application study of the linear shaped charge cutting technology on magnesium alloy components is basically blank. In response to the demand for the linear separation of magnesium alloys, the Mg-12Gd-0.5Y-0.4Zn alloy is selected to carry out the target shaped charge cutting test. The effects of the shaped charge line density, cutting thickness, and mechanical properties on the cutting performance of the alloy are studied. The shaped charge cutting mechanism is analyzed through the notch structure. The results show that the linear shaped charge cutting performance is significantly affected by the penetration and the collapse. The higher the linear density is, the stronger the ability of the linear shaped charge cutter is, and the greater the penetration depth is, which is advantageous. However, the target structure will be damaged when it is too large (e.g., 4.5 g?m-1). Within 12 mm, when the cutting thickness of the target increases, the penetration depth increases. The lower the tensile strength is, the greater the penetration depth is, and the more conducive the penetration depth to the shaped charge cutting is. When the elongation (EL) increases to 12%, the collapse of the target is incomplete and the target cannot be separated. When the tensile strength of the Mg-Gd-Y-Zn alloy is less than 350 MPa, the EL is less than 6.5%, the cutting thickness is less than 12 mm, and the linear shaped charge cutting of the magnesium alloy can be achieved stably.     

铝锂合金高速铣削表面粗糙度试验研究

在对2198铝锂合金进行高速铣削试验的基础上,研究了切削参数对表面粗糙度的影响规律,观察了其铣削表面形貌。结果表明:平直处表面粗糙度与拐角处表面粗糙度不一致是由机床主轴振动和实际进给量变化造成的;较小的每齿进给量和铣削宽度能够获得较好的表面质量;表面缺陷常发生在铣削刀痕交叉处。     

构建实例库的参数模型及其应用

通过分析系统模型和IDEFO模型,提出了实例参数模型,即将切削系统的各组成参量分成4类:非控制参量,过程参量,控制参量和输出参量并以此提出了实例库的构建过程.最后根据提出的参数模型,建立了高速切削数据库系统.     

生成矩形毛坯最优两段排样方式的递归算法

提出一种递归算法生成矩形毛坯两维两段排样方式。这种算法将板材分成两段,同一段中所有条带的长度和方向都相同,二段的条带方向相互平行或垂直,不同尺寸的毛坯可以在一根条带中出现。通过递归在段上生成最优条带布局,隐式地讨论所有长度的段,确定所有两段组合的价值,选择价值最大的一个组合作为最优解。计算结果表明,该算法在计算时间和材料利用率两方面都有效。最后,一个实际问题的解表明:使用该算法,材料利用率较高。     

涂层刀具低温铣削SiCp/Al复合材料表面质量研究

在加工过程中,相反的两相特性增加了 SiCp/Al复合材料加工难度,难以获得良好的表面质量.为了提高其切削性能,本文开展20vol％SiCp/Al复合材料铣削加工试验研究,比较常温和低温条件下TiAlN涂层和TiAlSiN涂层两种铣刀的切削性能.结果表明,在低温条件下,两种刀具的切削力增加,铣削后表面铝基体的开裂及剥落...     

Elliptical vibration cutting of large-size thin-walled curved surface parts of pure iron by using diamond tool with active cutting edge shift

Large-size thin-walled curved surface parts of pure iron are crucial in aerospace, national defense, energy and precision physical experiments. However, the high machining accuracy and surface quality are difficult to achieve due to the serious tool wear and deformation when machining the parts with conventional cutting tools. In this paper, an elliptical vibration cutting (EVC) with active cutting edge shift (ACES) based on a long arbor vibration device is proposed for ultra-precision machining the pure iron parts by using diamond tool. Compared with cutting at a fixed cutting edge, the influence of ACES on the EVC was analyzed. Experiments in EVC of pure iron with ACES were conducted. The evolutions of the surface roughness, surface topography, and chip morphology with tool wear in EVC with ACES are revealed. The reasonable parameters of ultra-precision machining the pure iron parts by EVC with ACES were determined. It shows that the ACES has a slight influence on the machined surface roughness and surface topography. The diamond tool life can be significantly prolonged in EVC of pure iron with ACES than that with a fixed cutting edge, so that high profile accuracy and surface quality could be obtained even at higher nominal cutting speed. A typical thin-walled curved surface pure iron part with diameter ∅240 mm, height 122 mm, and wall thickness 2 mm was fabricated by the presented method, and its profile error and surface roughness achieved PV 2.2 μm and Ra less than 50 nm, respectively.