CNC数控系统控制软件

本文分析了数控机床控制系统,由硬件NC(Numerical Contro1)向CNC(ComputerNumerical Control)转变时进给速度下降的问题,阐述了解决此问题的一种方法——二次插补方法。指出CNC数控系统是个多重中断系统,论述了将数控的工作按其重要的程度、实时性的高低,安排在不同的优先级,使整个系统协调工作的思想。     

Multi-mode optimal fuzzy active vibration control of composite beams laminated with photostrictive actuators

Firstly, a multi-field coupling finite element formulation of composited beam laminated with the photostrictive actuators is developed in this paper. Moreover, an optimal fuzzy active control algorithm is also proposed on the basis of the combination of optimal control and fuzzy one.This method opens a new avenue to resolve the contradiction between the linear system control method and nonlinear actuating characteristics of photostrictive actuators. The desired control for suppressing multi-modal vibration of photoelectric laminated beam is firstly obtained through optimal control and then the fuzzy control is used to approach the desired mechanical strain induced by photostrictive actuators. Thus, the multi-mode vibration control of beam is realized.In the design process of optimal fuzzy controller, the design of fuzzy control is independent of optimal control. The simulation results demonstrate that the proposed control method can effectively realize multi-modal vibration control of photoelectric laminated beams, and the control effect of optimal fuzzy control is better than that of optimal state feedback control.     

一种TASIMM-UKF导弹状态估计方法

为了提高对机动导弹状态估计的精度和速度,提出了一种三轴分离IMM-UKF(TASIMM-UKF)滤波算法。将导弹运动状态按坐标轴方向进行三轴分离,并基于CV,CA和CJ模型集,采用无迹卡尔曼滤波器并行估计导弹三轴状态信息,有效地解决了导弹不同运动轴间的模型竞争问题。仿真结果表明,该方法能有效提高状态估计精度,缩短了估计时间,对复杂大机动目标状态估计具有良好的性能。     

An energy-based coupling degradation propagation model and its application to aviation actuation system

The degradation of components in complex mechatronic systems involves multiple physical processes which will cause coupling interactions among nodes in the system. The interaction of nodes may be carried out not only by physical connections but also by the environment which cannot be described by single network using the traditional methods. In order to give out a unified model to quantitatively describe the coupling degradation spreading by both physical connections and environment, a novel Energy-Flow-Field Network (EFFN) and a coupling degradation model based on EFFN are proposed in this paper. The EFFN is driven by energy flow and the state transition of spatially related nodes is triggered by the dissipation energy. An application is conducted on aviation actuation system in which the degradation spreading by fluid-thermal-solid interaction is considered. The degradation path and the most probable fault reason can be obtained by combining the state transition and energy output of nodes, which is consistent with the given scenario.     

航空机载设备软故障分析及对策探讨

分析了软故障的概念、表现特点、检测与诊断的难点，提出了解决航空机载设备软故障的对策，以探寻提高航空装备维修质量的有效途径。     

某靶用型无人机发动机空中停车故障分析

针对某新型靶机出现的发动机空中停车故障,对测控站记录数据进行分析,发现了转速采集系统和ECU控制系统存在的缺陷,并提出了解决措施。     

某型装备轴承件无失效时的可靠性参数估计

针对寿命服从威布尔分布的某型装备轴承件在无失效数据时的可靠性参数估计问题,首先,以失效概率为待估参数,取其先验分布为Beta分布,在2个超参数的先验密度函数为2种不同情形下,建立了失效概率的2种EBayes估计模型,分析了稳健性、渐近性和单调性;然后,对威布尔分布参数进行了加权最小二乘估计,进而建立了可靠度的2种E-Bayes估计模型,分析了稳健性和单调性;最后,结合实例数据进行了可靠性参数估计与分析,指出第2种估计模型更加合理有效。     

基于气压高度辅助的机载自主完好性监测算法

卫星接收机自主完好性监测是指根据用户接收机的多余观测值监测用户定位结果的完好性,其目的是在导航过程中检测出发生故障的卫星,并保障导航定位精度。针对卫星接收机自主完好性监测算法可用性不足的问题,结合机载实际导航系统配置,提出了一种基于气压高度表辅助的机载自主完好性监测算法。综合利用卫星导航系统及气压高度表观测信息,建立联合系统的观测模型,推导了基于多解分离的完好性监测及保护级别计算方法。仿真结果表明,相比于传统的接收机自主完好性监测算法,该算法在可见星为5颗时仍能识别故障卫星。该算法具有更好的故障检测能力及可用性,能有效提高卫星导航系统的完好性监测性能,从而保证卫星导航系统的精度和可靠性。     

突加不平衡下GTF发动机转子系统瞬态响应分析

针对GTF发动机低压转子系统突加不平衡瞬态响应问题,基于有限元法建立了考虑啮合单元、行星架单元、膜盘联轴器单元的多体接触、多转子耦合动力学模型,介绍了考虑非线性因素下突加不平衡瞬态响应计算方法,求解了低压转子系统的突加不平衡瞬态响应,并分析了关键部件刚度对突加不平衡的影响规律。结果表明：当风扇转子发生突加不平衡时,各部件均表现为振动幅值突增,后迅速趋于稳定,低压涡轮转子发生明显拍振,突加不平衡载荷主要由行星架结构和第1.5支点刚性支承承担;行星架刚度主要影响风扇转子突加不平衡响应、第1.5支点和行星架处的外传力;膜盘联轴器刚度主要影响增压级突加不平衡响应、转子在突加不平衡之后稳定运转情况。     

含多部位损伤搭接结构应力强度因子三维有限元分析

应力强度因子(Stress intensity factor,SIF)分析是含多部位损伤(Multiple site damage,MSD)结构剩余强度和裂纹扩展寿命预测的基础和关键。考虑接触与摩擦,建立了含MSD搭接结构的三维有限元模型,研究了不同裂纹长度、铆钉类型以及损伤模式下裂纹尖端SIF分布情况和变化规律。结果表明,搭接件孔边裂纹Ⅰ型SIF起主导作用,Ⅱ型和Ⅲ型SIF可忽略不计。由于次弯曲、铆钉变形和板厚度等因素,SIF在外表面最小,接触面一侧较大,最大值多位于蒙皮内部。MSD会使裂纹间的干涉作用增强,SIF增大,且裂纹间距离越近干涉作用越强。裂纹长度相同时,埋头铆钉的孔边裂纹SIF积分均值大于平头铆钉,且接触面的SIF埋头铆钉大于平头铆钉,外表面则相反。