Morphology and Frictional Characteristics Under Electrical Currents of Al203/Cu Composites Prepared by Internal Oxidation

Two AhO3/Cu composites containing 0.24 wt.% A1203 and 0.60 wt.% A1203 separately are prepared by internal oxidation.Effectsof sliding speed and pressure on the fi-ictional characteristics of the composites and copper against brass are investigated and compared.The changes in morphology of the sliding surface and subsurface are examined with scanning electron microscope (SEM) and energy dispersive X-ray spectrum (EDS).The results show that the wear resistance of the AI203/Cu composites is superior to that of copperunder the same conditions.Under a given electrical current,the wear rate of AI203/Cu composites decreases as the AleO3-content increases.However,the wear rates of the Al203/Cu composites and copper increase as the sliding speed and pressure increase under drysliding condition.The main wear mechanisms for AleO3/Cu composites are of abrasion and adhesion;for copper,it is adhesion,although wear by oxidation and electrical erosion can also be observed as the speed and pressure rise.     

火星探测器使命轨道捕获策略研究

分析了火星探测器使命轨道捕获策略研究需求,给出了三种可用的典型捕获策略,建立了速度纵向平面内的飞行动力学方程,对三种典型策略进行了飞行动力学仿真,给出了各策略完成捕获所需速度增量、任务耗时及过。通过对仿真结果的分析比较,得出研究结论为：直接制动捕获任务耗时及过载较小,但速度增量需求较大;多次穿越后捕获任务耗时较长,但速度增量需求和过载较小;一次穿越后捕获速度增量需求较小且任务耗时较短,但过载较大。     

小型热真空试验设备网络化集群测控技术

随着航天器部组件试验任务的日益增多,在人员少的情况下,高效率地完成型号任务的需求十分迫切。文章介绍了小型热真空试验设备网络化集群测控的方法与技术,以某小型热真空试验设备群为例,针对其接口复杂、数据量大、地理位置分散且要求集中管理的特点,详细阐述了采用混合B/S模式与C/S模式的网络化测控技术来实现小型热真空试验设备群集群测控的功能。该技术已在小型热真空试验设备的集群控制中得到了成功的应用。     

Load balancing strategy and its lookup-table enhancement in deterministic space delay/disruption tolerant networks

Space networks, in which connectivity is deterministic and intermittent, can be modeled by delay/disruption tolerant networks. In space delay/disruption tolerant networks, a packet is usually transmitted from the source node to the destination node indirectly via a series of relay nodes. If anyone of the nodes in the path becomes congested, the packet will be dropped due to buffer overflow. One of the main reasons behind congestion is the unbalanced network traffic distribution. We propose a load balancing strategy which takes the congestion status of both the local node and relay nodes into account. The congestion status, together with the end-to-end delay, is used in the routing selection. A lookup-table enhancement is also proposed. The off-line computation and the on-line adjustment are combined together to make a more precise estimate of the end-to-end delay while at the same time reducing the onboard computation. Simulation results show that the proposed strategy helps to distribute network traffic more evenly and therefore reduces the packet drop ratio. In addition, the average delay is also decreased in most cases. The lookup-table enhancement provides a compromise between the need for better communication performance and the desire for less onboard computation.     

采用改进的CE/SE方法模拟方管中氢氧爆轰波的稳定传播结构

采用改进的时空守恒元/解元（CE/SE）格式和新型二步化学反应模型，对小扰动情况下方管通道中的氢氧气相爆轰传播过程进行了数值模拟，对不同截面尺寸和两种扰动模式下的爆轰波三波线结构进行了详细计算和分析。数值模拟花费了相对较少的计算代价，清晰地得到了方形截面通道中3种相对稳定的爆轰波传播结构，即直角模式、对角模式和螺旋模式。随着截面尺寸的减小，爆轰波胞格图样与波阵面结构随之产生适应性的变形，乃至出现胞格数目的减少和部分三波线的消失；最终，直角模式和对角模式都会转化为顺时针或逆时针的螺旋模式；临界尺寸下，得到了转换过程中新的过渡结构和压力脉冲振幅的变化，并以此初步讨论了直角和对角传播模式的稳定性。     

中继卫星系统仿真软件设计与应用*

设计开发中继卫星系统仿真软件,并针对理想信道条件、I/Q幅相不平衡、幅频特性、群时延、相位噪声、功放饱和条件、非线性信道条件这七种信道,仿真16QAM和16APSK的误码率性能,并对仿真结果进行分析。利用仿真平台得出的非线性信道条件下误码率需求与所需信噪比之间的关系,可以作为完善系统技术指标的重要依据,为中继卫星系统后续建设和应用提供重要参考。     

基于Web的e—CRM系统的分析与设计

首先介绍了CRM和e-CRM的概念,进而提出了基于WEB的六层技术架构,并介绍了各个层次的功能,最后对企业实施e-CRM提出了几点建议,并对CRM发展趋势做了预测。     

基于STEP的CAD/CAPP集成

CAD/CAPP的信息渠成是CIMS的关键技术之一,它的实施必须应用STEP技术。本文介绍了一个基于STEP的CAD/CAPP集成系统,它是通过建立CAD和CAPP之间的信息转换接口,将MPIM和BRCAPP连接起来实现的。MPIM和BRCAPP之间的信息交换方式采用了STEP中性文件交换。     

飞机CAD／CAM过程中数据流向的探讨

从回顾南飞公公开展ＣＡＤ／ＣＡＭ工作情况入手，对ＣＡＤ／ＣＡＭ过程中数据流向问题进行了探讨，分析了不足之处，提出了改进数据流向的新思路。     

时分式立体图像微机系统

本文简要介绍了时分法实现立体视觉检测的理论基础，以３８６微机为例，本文着重揭示了一种在微机上显示立体图像的方法。