基于小波分析的虚拟仪器

以小波分析原理为基础,开发出可视化和可操作的虚拟仪器,用于处理实验数据与药物分析.应用小波变换实现数据消噪,利用LabVIEW 和MATLAB软件开发出虚拟仪器.用该仪器可实现对数据进行消噪;在不经分离的情况下,对药物实现多组分的含量测定及对实验结果进行分析和预测,采用的方法和开发的软件在药学领域有其独到的应用价值.     

Aiming at a 1-cm Orbit for Low Earth Orbiters: Reduced-Dynamic and Kinematic Precise Orbit Determination

The computation of high-accuracy orbits is a prerequisite for the success of Low Earth Orbiter (LEO) missions such as CHAMP, GRACE and GOCE. The mission objectives of these satellites cannot be reached without computing orbits with an accuracy at the few cm level. Such a level of accuracy might be achieved with the techniques of reduced-dynamic and kinematic precise orbit determination (POD) assuming continuous Satellite-to-Satellite Tracking (SST) by the Global Positioning System (GPS). Both techniques have reached a high level of maturity and have been successfully applied to missions in the past, for example to TOPEX/POSEIDON (T/P), leading to (sub-)decimeter orbit accuracy. New LEO gravity missions are (to be) equipped with advanced GPS receivers promising to provide very high quality SST observations thereby opening the possibility for computing cm-level accuracy orbits. The computation of orbits at this accuracy level does not only require high-quality GPS receivers, but also advanced and demanding observation preprocessing and correction algorithms. Moreover, sophisticated parameter estimation schemes need to be adapted and extended to allow the computation of such orbits. Finally, reliable methods need to be employed for assessing the orbit quality and providing feedback to the different processing steps in the orbit computation process. This revised version was published online in August 2006 with corrections to the Cover Date.     

电机生产企业绿色工厂评价内容、指标及方法的研究

为积极响应《中国制造2025》以及《工业和信息化部办公厅关于开展绿色制造体系建设的通知》,针对我国目前在电机生产行业相关绿色工厂评价要求缺失的现状,结合我国电机生产企业的物料使用特点、生产工艺特点、生产装备特点、产品特点、能源利用特点、主要污染物排放特点等6个方面,对电机生产企业绿色工厂评价内容、指标及方法进行研究。该研究为我国电机生产行业全面推行绿色制造,加快电机生产行业绿色改造升级,构建电机生产行业绿色制造体系,提高我国电机生产行业的国际竞争力作出积极贡献。     

三轴稳定卫星无陀螺姿态确定算法研究

针对三轴稳定卫星进行了正常飞行模式下无陀螺姿态确定算法研究，采用磁强计、地球敏感器和太阳敏感器组合获得姿态数据，利用四元数法和高斯－马尔可夫过程建立了姿态确定估计器算法模型。通过数学仿真证明，此姿态确定算法能够对星体姿态进行较精确的估计或校正，满足卫星控制精度要求。     

An empirical solar radiation pressure model for satellites moving in the orbit-normal mode

We present a family of empirical solar radiation pressure (SRP) models suited for satellites orbiting the Earth in the orbit normal (ON) mode. The proposed ECOM-TB model describes the SRP accelerations in the so-called terminator coordinate system. The choice of the coordinate system and the SRP parametrization is based on theoretical assumptions and on simulation results with a QZS-1-like box-wing model, where the SRP accelerations acting on the solar panels and on the box are assessed separately. The new SRP model takes into account that in ON-mode the incident angle of the solar radiation on the solar panels is not constant like in the yaw-steering (YS) attitude mode. It depends on the elevation angle of the Sun above the satellite’s orbital plane. The resulting SRP vector acts, therefore, not only in the Sun-satellite direction, but has also a component normal to it. Both components are changing as a function of the incident angle. ECOM-TB has been used for precise orbit determination (POD) for QZS-1 and BeiDou2 (BDS2) satellites in medium (MEO) and inclined geosynchronous Earth orbits (IGSO) based on IGS MGEX data from 2014 and 2015. The resulting orbits have been validated with SLR, long-arc orbit fits, orbit misclosures, and by the satellite clock corrections based on the orbits. The validation results confirm that—compared to ECOM2—ECOM-TB significantly (factor 3–4) improves the POD of QZS-1 in ON-mode for orbits with different arc lengths (one, three, and five days). Moderate orbit improvements are achieved for BDS2 MEO satellites—especially if ECOM-TB is supported by pseudo-stochastic pulses (the model is then called ECOM-TBP). For BDS2 IGSOs, ECOM-TB with its 9 SRP parameters appears to be over-parameterized. For use with BDS2 IGSO spacecraft we therefore developed a minimized model version called ECOM-TBMP, which is based on the same axis decomposition as ECOM-TB, but has only 2 SRP parameters and is supported by pseudo-stochastic parameters, as well. This model shows a similar performance as ECOM-TB with short arcs, but an improved performance with (3-day) long-arcs. The new SRP models have been activated in CODE’s IGS MGEX solution in Summer 2018. Like the other ECOM models the ECOM-TB derivatives might be used together with an a priori model.     

Ionospheric TEC disturbances over China during the strong geomagnetic storm in September 2017

From September 7 to 8, 2017, a G4-level strong geomagnetic storm occurred, which seriously impacted on the Earth’s ionosphere. In this work, the global ionospheric maps released by Chinese Academy of Sciences are used to investigate the ionospheric responses over China and its adjacent regions during the strong storm. The prominent TEC enhancements, which mainly associated with the neutral wind and eastward prompt penetration electric field, are observed at equatorial ionization anomaly crests during the main phase of the storm on 8 September 2017. Compared with those on 8 September, the TEC enhancements move to lower-latitude regions during the recovery phase on 9 September. A moderate storm occurred well before the start of the strong storm causes similar middle-latitude TEC enhancements on 7 September. However, the weak TEC depletion is observed at middle and low latitude on 9–10 September, which could be associated with the prevailing westward disturbance electric field or storm-time neural composition changes. In addition, the storm-time RMS and STD values of the ionospheric TEC grids over China increase significantly due to the major geomagnetic storm. The maximum of the RMS reaches 12.0 TECU, while the maximum of the STD reaches 8.3 TECU at ~04UT on 8 September.     

精密GPS卫星钟差的改正和应用

分析了 GPS卫星钟差的变化特性,探讨了利用 GPS地面跟踪站的观测数据估算GPS卫星钟差的可行性.建立了相应的算法和软件系统,并把由地面跟踪站的实测数据估算的卫星钟差用于星载 GPS定轨计算,得到优于1m的定轨精度.     

Negative VTEC with spherical harmonic expansion model under different solar activity conditions

The Earth’s ionosphere can be described by a spherical harmonic (SH) expansion up to a specific degree. However, there exist negative vertical total electron content (VTEC) values in the global ionosphere map (GIM) with the SH expansion model. In this contribution, we specifically investigated the negative VTEC values that are induced by the SH expansion model and validated the performance of the inequality-constrained least squares (ICLS) method in eliminating the negative VTEC values. The GPS data from 2004 to 2017 was selected to cover one solar cycle and the experiments under different solar activity conditions were analyzed. The results in our work show that the occurrence of the negative VTEC values is attributed to the deficiency of the SH expansion model when the VTEC itself is small instead of the unevenly distribution of the GNSS stations. The negative VTEC values appear periodically in the temporal domain, showing apparently one year and half year periods. During one year, two peaks in June and December can be observed in the time series of the negative VTEC values. The number of negative VTEC values in June is obvious larger than that in December. During one solar cycle, the number of negative VTEC values under quiet solar activity condition is obvious larger than that under strong solar activity condition. In the spatial domain, the appearance of the negative VTEC values is strongly related with the movement of the subsolar point. In the latitude of the subsolar point has the largest magnitude, the negative values will appear on the opposite hemisphere and the further from the subsolar point the more negative values. The maximum number of the negative VTEC values in the southern hemisphere appears in June, while the peak value in the northern hemisphere appears in December. The maximum number of negative VTEC values in the southern hemisphere is generally larger than that in the northern hemisphere. In addition, the negative VTEC values are distributed both at middle latitude and high latitude in the southern hemisphere, while they are mainly distributed at high latitude in the northern hemisphere. When the ICLS method is used, the negative VTEC values can be eliminated efficiently and it has nearly no influence on the positive VTEC values. The ICLS method can also improve the receiver’s differential code bias (DCB) and significantly decrease the unreasonable negative slant TEC (STEC) values along the lines of sight. Using the final GIM product of the Jet Propulsion Laboratory (JPLG) as a reference, the root mean square (RMS) of the ICLS solution shows maximum 25%, 20% and 45% improvement relative to the least squares (LS) solution at northern high latitude, southern middle latitude and southern high latitude, respectively.