A comprehensive study of the 2016 Mw 6.0 Italy earthquake based on high-rate (10 Hz) GPS data

The 2016 M_w 6.0 Italy earthquake is successfully recorded by the near-field 10?Hz GPS and 200?Hz Strong Motion (SM) stations, providing valuable data for this study. A comprehensive study of this earthquake is carried out based on GPS data, which contains coseismic deformations analysis, noise analysis, seismic wave picking, and magnitude determination. The noise of most GPS-derived displacement waveforms can be described as a combination of white noise, flicker noise, and random walk noise after the earthquake occurrence, and the spectral indices vary significantly for most stations, implying that the seismic signals have affected the noise characteristic of GPS-derived displacement waveforms. S-transform is employed to assess the GPS capability to detect the seismic arrival time. The SM station AMT and the GPS station AMAT are in good agreement in seismic wave picking, and the difference is only 1.2?s in the north component, suggesting that the outcome of seismic wave picking using GPS data is reliable. Then, a classic empirical formula is employed to determine the moment magnitude. A robust moment magnitude (Mw 5.90) can be estimated by the nine GPS stations with about 23.9?s. If four GPS stations near the epicenter is chosen to determine the magnitude, it only take 13.0?s to retrieve a reliable preliminary (Mw 5.82) magnitude, which is 5.4?s ahead of nine stations. In addition, Cross Wavelet Transform (XWT) is adopted to measuring the correlation and phase relationship between GPS and SM records. The result of XWT analysis indicates 10?Hz GPS is capable of capturing reliable and accurate coseismic dynamic deformations, as evidenced by the XWT-based semblance being close to 1 between GPS and SM records. The above results confirm the capability of 10?Hz GPS to capture coseismic dynamic deformations, detect seismic arrival time, and determine earthquake magnitude. Moreover, rapid magnitude determination based on 10?Hz GPS data can be regarded as an important supplement to Earthquake Early Warning (EEW).     

飞机附件的维修间隔决策

研究了飞机附件软时限的设定和管理方法,该方法可将附件的故障发生机率和运行风险控制在可接受水平,减少航空公司因机务原因的延误,提高飞机可利用率。     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

单晶合金蠕变性能影响因素分析

通过分析热处理工艺、元素含量、晶体取向性以及温度和应力对蠕变性能的影响,得出任何1种影响合金蠕变性能的因素其实质都是改变了合金的微观组织,并最终反映到γ′筏形的完善程度S、终端密度TD和线性密度LD上。S值越接近1,γ′筏形的完善程度越好,蠕变寿命就越长;而TD和LD值越大,微观组织图内筏形交叉和中断的数目就越多,蠕变寿命就越短。     

基体含量对复合材料结构稳定性的影响

基体含量影响着复合材料结构的性能,针对复合材料结构的稳定性设计,基于复合材料细观力学以及经典层合理论,分析复合材料层合板中的基体含量对于其材料性能,尤其是稳定性的影响.通过计算得出:随着基体含量的增加,材料的性能略有下降,但是由于基体含量增大而导致的单层板厚度增加,使得层合板的稳定性大幅提高.因此,在复合材料结构的稳定性设计中,应该考虑基体含量的影响.     

主成分分析用于近红外光谱定量测定高硅氧／酚醛预浸料树脂含量及挥发份含量研究

采用傅里叶变换近红外漫反射光谱技术分析了酚醛树脂固化过程的光谱变化,发现高硅氧/酚醛预浸料的近红外光谱经一阶导数处理后,被树脂信息掩盖的挥发份(乙醇)的光谱信息显露出来,由此采用处理后的光谱定量分析挥发份能取得更精确的结果。结合主成分分析法研究了高硅氧/酚醛预浸料树脂含量、挥发份含量的定量分析。结果表明,预浸料的第一主成分在树脂含量上有极高的正载荷。用主成分回归所建立的模型对未知样品预测,树脂含量和挥发份含量平均标准偏差分别为0.6114和0.1885。     

GPS姿态测量的载波相位整周模糊度快速解算

 根据 ARCE方法可以将模糊度搜索空间从所观测到的 m颗卫星的 m -1维降为 3维独立整周模糊度搜索空间,结合整数高斯变换及基线长度约束减小模糊度搜索空间,利用 Cholesky分解提高模糊度搜索效率,实验结果证明该方法能够快速解算整周模糊度适于实时姿态确定等应用。     

基于遗传算法的单站测速数据定初轨技术研究

只有单站测速数据的情况下,传统的定轨方法难以实现初轨确定.将遗传算法应用于定轨实践,实现了无初值条件下单站测速数据初始轨道确定,并能满足收敛要求,为缓解测控资源紧张提供了重要支持.在中巴“资源一号“卫星的长期测控任务中应用,证明了本方法的有效性.     

测量围护结构含水率的同面散射场式电容传感器设计

目前常用的测量含水率的方法有微波法、红外线法和电容法.由于基于电容法的传感器具有分辨力高、响应速度快、体积小、结构简单等优点,被广泛应用.针对围护结构含水率测试深度的要求和测试特点,本文通过仿真和实验,对同面电容传感器探头的结构尺寸进行了优化设计,并采取了保护电极以提高其抗干扰能力;运用改进的充放电电容检测电路,设计出一种测量围护结构含水率的新型同面散射场式电容传感器,该传感器具有宽范围的测试深度和较高的测试灵敏度.