翼型低雷诺数层流分离现象随雷诺数的演化特征

层流分离现象是翼型低雷诺数条件下出现的典型流场特征。层流分离流动中包含流动分离、转捩、再附等非定常流动结构,层流分离流动的形成与演化会对翼型气动特性产生恶化作用。采用大涡模拟（LES）方法对低雷诺数范围内不同雷诺数下的翼型层流分离流动开展精细数值模拟,研究了雷诺数对翼型气动特性的影响规律及作用机理。LES方法采用隐式亚格子模型,基于结构化拼接网格,对流项离散和时间推进方法分别采用AUSM⁺格式以及双时间步方法。验证算例计算结果表明数值模拟方法的正确性及可靠性,雷诺数对翼型气动特性具有显著影响。随雷诺数降低,时均分离泡外形增大、位置后移,平均阻力系数增大,特别是在较低雷诺数下,翼型升阻力系数随时间出现振荡现象。进一步研究表明,造成不同时均分离泡形态和气动特性的原因在于翼型上表面分离剪切层的失稳与转捩特征。随雷诺数降低,流动黏性增大,导致分离剪切层速度梯度减小,流动发生转捩及再附位置后移,直至翼型表面不再发生转捩和再附。     

Optimization and verification of free flight separation similarity law in high-speed wind tunnel

Based on the similarity of separation time, a similarity law optimization method for high-speed weapon delivery test is derived. The typical separation state under wind load is simulated by the numerical method. The real separation data of aircraft, separation data of previous test methods, separation data of ideal wind tunnel test of previous methods, and simulation data of the proposed optimization method are obtained. A comparison of the data shows that the method proposed can improve the performance of tracking. Similarity law optimization starts with the development of motion equations and dynamic equations in the windless state to address the problems of mismatching between vertical and horizontal displacement, and to address the problems of separation trajectory distortion caused by insufficient gravity acceleration of the scaling model of existing light model. The ejection velocity of the model is taken as a factor/vector, and is adjusted reasonably to compensate the linear displacement insufficiency caused by the insufficient vertical acceleration of the light model method, so as to ensure the matching of the vertical and horizontal displacement of the projectile, and to improve the consistency between the test results of high-speed projection and the actual separation trajectory. The optimized similarity law is applicable to many existing free-throwing modes of high-speed wind tunnels. The optimized similarity law is not affected by the ejection velocity and hanging mode of the projectile. The optimized similarity law is suitable not only for the launching of the buried ammunition compartment and external stores, but also for the test design of projectile launching and gravity separation.     

飞机发动机混沌振动信号盲分离检测方法

发动机混沌振动信号携带着丰富的状态信息,依据混沌振动信号进行状态监测及故障诊断是一种很有前途的技术手段,但由于混沌信号具有伪随机特性及在低频段具有宽频谱等特点,使得传统的方法很难将其从振动信号中分离。在提取混沌振动信号方面,使用快速独立分量分析（Fast ICA）盲分离方法分离出飞机发动机振动信号中的混沌信号。利用功率谱和Lyapunov指数（LE）方法进行了判定,根据计算结果对发动机状态做出判断,验证了盲分离方法分离混沌振动信号的有效。盲分离检测混沌振动信号的方法不仅使依据混沌信号判断飞机发动机状态成为可能,也为利用混沌信号进行状态预测和控制提供了一种方法。     

等离子体气动激励抑制压气机叶栅角区流动分离的仿真与实验

进行了等离子体气动激励抑制低速压气机叶栅角区流动分离的数值仿真研究,并进行了实验验证.小攻角情况下,叶片吸力面角区流动分离导致显著的尾迹总压损失.来流速度为50 m/s(雷诺数为223 000)时,等离子体气动激励可以有效的抑制角区流动分离,降低总压损失.激励电压、频率分别为10 kV和22 kHz时,50%叶高处的尾迹压力分布基本不变,60%和70%叶高处的最大总压损失分别减小了13.83%和10.74%.增加激励电极组数或激励电压,可以增强抑制效果.      

基于Tcl/tk语言的外挂投放并行数值模拟流程集成方案

用Tcl/Tk脚本语言将非结构网格自动生成,欧拉方程并行求解和六自由度运动方程求解等环节集成为一个完整的外挂投放模拟系统,并针对AEDC弹翼分离算例,模拟并预测了外挂投放的流场和导弹投放后的弹道轨迹。数值试验结果证明了此集成方案的可行性。     

卫星筒式偏心在轨分离动力学分析

偏心安装的子卫星在轨分离是一类特殊的卫星在轨分离问题。为了给分离地面试验和分离系统设计提供依据,在惯性参考系中分析了筒式偏心在轨分离问题的运动特性。以刚体运动学原理和动力学动量定理、角动量定理及能量定理为依据,建立了分离过程的动力学模型。运用数值求解方法,给出了不同初始条件下的模型求解算例,并对求解结果进行了比较和分析。分析结果表明,分离弹簧物性参数是影响分离速度的主要因素;卫星相对安装位置是影响分离角速度的主要因素。     

引入压力梯度的针对角区分离流动的Spalart-Allmaras模型的改进

针对Spalart-Allmaras（S-A）模型在角区分离计算中的问题,将无量纲的压力梯度引入其涡黏性输运方程的生成项,得到了改进的S-A模型.通过对两套含角区分离的低速压气机叶栅进行验证计算发现:与实验结果相比,原始S-A模型所得的分离区偏大,分离区内壁面压力偏低;而改进模型得到了与实验一致的分离区尺寸以及吸力面、压力面压力系数分布等结果.针对S-A模型涡黏性生成项和耗散项的分析表明:引入的无量纲压力梯度有效的识别了角区分离,在分离区内改变了涡黏性的生成、耗散关系,增大了涡黏性,从而缩小了计算所得分离区,同时在主流区保留了原始S-A模型的计算结果,进而带来了良好的改进效果.      

内压缩段构型对高超声速进气道自起动性能的影响

为了探寻内压缩段构型对高超声速进气道自起动性能的影响,对二元高超声速进气道折角型和曲线型两种内压缩段的自起动过程进行准定常数值仿真研究.对比了这两种构型进气道在不同唇罩起始压缩角下的自起动性能和自起动过程中分离区的变化规律,并分析了内通道压缩强度沿程分布对进气道自起动性能的影响.研究表明:①即使进气道内收缩段的内收缩比相同,不同的内压缩段构型和唇罩起始压缩角对高超声速进气道的自起动性能影响显著,曲线型内压缩段构型的自起动性能明显优于折角型;②内压缩段的总压缩强度及其沿流向分布都是影响高超声速进气道自起动性能的关键因素,并且压缩强度沿流向分布决定着进气道在自起动过程中处于临界状态下主分离包所停留的位置.      

一种制导误差分离的新方法

针对制导误差分离模型中环境矩阵S存在严重病态性,从而影响分离结果精度问题,提出了一种基于动力系统求解的制导误差分离方法。该方法从分析线性迭代求解方法入手,将具有病态特性的线性方程组求解问题转化为对相应刚性动力系统的求解问题。这里给出了该方法收敛性及其他特性的证明。为了验证该方法效果,在遥外测视速度误差分别为0.01m/s、0.02m/s以及0.03 m/s的条件下,选用PB(Primary Bayesian,主成分贝叶斯)估计方法与其进行比较,数值结果表明,该方法可有效地降低环境矩阵病态性对误差分离结果的影响,且分离结果的稳健性和精度都优于PB估计方法得到的结果。     

Effects of synthetic jet frequency on the separated flow in a diffusing S-duct

Numerical simulations were carried out to investigate the effects of synthetic jet actuation frequency on the separated flow in a diffusing S-duct. The Reynolds number based on the entrance height was 9.78×105. At first, the numerical model was validated with experimental data, and then, the interaction between the separated flow and the synthetic jets at different frequencies was discussed. The results demonstrate that the control effect is significantly dependent on the momentum mixing enhancement between inside of the separated boundary layer and the outer flow. There exists a narrow range of actuation frequency, in which effective separation control can be achieved using synthetic jets. A dimensionless frequency F+=1.0 is identified as the optimal frequency, with a momentum coefficient of 1.62×10-3, the separation area is reduced about 46%, and the aerodynamic performance of the S-duct is also greatly improved compared to uncontrolled case. Further analysis reveals that the choice of actuation frequency is mainly determined by the momentum flux produced by a single ejection and the spacing between adjacent ejections, the optimal frequency case can be understood as a balance between the two factors. In addition, it is found that the synthetic jets can also suppress the secondary flows while decreasing the separation.