Milling surface roughness for 7050 aluminum alloy cavity influenced by nozzle position of nanofluid minimum quantity lubrication

In nanofluid minimum quantity lubrication (NMQL) milling of aviation aluminum alloy, it is the bottleneck problem to adjust the position parameters (target distance, incidence angle, and elevation angle) of the nozzle to improve the surface roughness of milling, which has large and uncontrollable errors. In this paper, the influence law of milling cutter speed, helical angle, and cavity shape on the flow field around the milling cutter was studied, and the optimal nozzle profile parameters were obtained. Using 7050 aluminum alloy as the workpiece material, the milling experiment of the NMQL cavity was conducted by utilizing cottonseed oil-based Al₂O₃ nanofluid. Results show that the high velocity of the surrounding air flow field and the strong gas barrier could be attributed to high rotating velocities of the milling cutter. The incidence angle of the nozzle was consistent with the helical angle of the milling cutter, the target distance was appropriate at 25–30 mm, and the elevation angle was suitable at 60°–65°. The range and variance analyses of the signal-to-noise ratio of milling force and roughness were performed, and the chip morphology was observed and analyzed. The results show that the optimal combination of nozzle position parameters was the target distance of 30 mm, the incidence angle of 35°, and the elevation angle of 60°. Among these parameters, target distance had the largest impact on cutting performance with a contribution rate of more than 55%, followed by incidence angle and elevation contribution rate. Analysis by orthogonal experiment revealed that the nozzle position parameters were appropriate, and R_a (0.087 μm) was reduced by 30.4% from the maximum value (0.125 μm). Moreover, R_sm (0.05 mm) was minimum, which was 36% lower than that of the seventh group (R_sm = 0.078 mm).     

高强铝合金复合脉冲VPTIG焊缝组织和性能

采用超快速变换复合超音频脉冲方波变极性TIG电弧焊接工艺进行2219-T87高强铝合金焊接,研究分析了焊缝显微组织和接头拉伸性能变化.结果表明,2219-T87铝合金复合超音频脉冲电流变极性焊接接头的组织和性能均发生显著变化,焊缝区显微组织明显细化,由粗大柱状晶向细小等轴晶转变,接头抗拉强度和断后伸长率显著提高.接头断口由脆性断裂主要特征转变为"韧性+脆性"的混合型断裂模式.在一定范围内,脉冲电流频率越高,脉冲占空比越小,作用效果越明显.复合超音频脉冲电流频率为40 kHz,脉冲电流占空比为20%时,接头抗拉强度和断后伸长率分别达到母材金属的70%和58%.     

Multi-functional SiC/AI Composites for Aerospace Applications

Multi-functional Al-matrix composites with high volume fraction (55%-57%) of SiC particles are produced with the new pres-sureless infiltration fabrication technology, X-ray detection and microscopic observation display the composites which are macroscopi-tally homogeneous without porosity. The investigation further reveals that the SiC/Al composites possess low density (2.94 g/cm3), high elastic modulus (220 GPa), prominent thermal management function as a result of low coefficient of thermal expansion (8 × 10-6 K-1) and techniques, the multi-functional SiC/Al composites have managed to be made into near-net-shape parts. Many kinds of precision com-ponents of space-based optomechanical structures and airborne optoelectronic platform have been turned out. Of them, several typical products are being under test in practices.     

铝铜点焊的研究

提出了铝铜过渡接头的点焊新方法,用交流焊机点焊铝铜,解决了Al2O3氧化膜层的破碎问题。从而可利用热活化、压力、电磁搅拌力,使铝铜固溶,扩散和铝液面移动,完成铝铜点焊,获得比铝强度高的焊接接头,为铝代铜的运用提供了一种特殊的途径。     

Cf／SiC复合材料TixOy—TiCx—Ti5Si3／微晶玻璃抗氧化涂层

提出一种用于碳纤维增强碳化硅复合材料(Cf/SiC)的成本低、工艺简单的复合抗氧化涂层:采用熔盐渗金属法在Cf/SiC表面制备钛金属化层,在其上通过涂覆烧结法获得MgO-Al2O3-SiO2(MAS)微晶玻璃层。通过立体显微镜、扫描电镜、能谱分析和X射线衍射等测试手段对复合涂层的形貌、成分和相组成进行分析,采用静态氧化法测试其在1000℃的抗氧化能力。结果表明,复合涂层结构相对致密,主要成分为:TixOy-TiCx-Ti5Si3/微晶玻璃;涂层具有过渡、封孔、阻碳、自愈合、阻氧、抗挥发的功能;带有复合涂层的Cf/SiC在1000℃保温12h,热冲击12次后,涂层保持致密无裂纹,单位面积失重为0.0039g/cm2,强度保留率为99.3%,有效提高Cf/SiC的抗氧化能力。     

大型整体壁板成形技术

 大型整体壁板是现代先进民用飞机的重要结构件,大型整体壁板成形技术是整机研制过程中所必须要解决的重大关键技术。从大型整体壁板的结构特点出发,介绍了整体壁板的结构形式和分类,重点阐述了整体带筋壁板喷丸成形技术和时效成形技术的国外研究应用进展及发展趋势,分析了国内现有整体壁板成形技术的基础和存在问题,特别介绍了国内在ARJ21新支线飞机研制中所取得的最新进展。最后针对中国大飞机研制的紧迫需求,提出了尽快开展大飞机机翼和机身整体壁板成形技术研究的建议和对策。     

大型水平管道中玉米淀粉/空气混合物爆炸过程的实验研究

在长为32.4m、内径为0.199m的大型长直水平管道中对玉米淀粉空气两相流的爆炸过程进行了研究.实验采用40J电火花引燃点火端4.2m范围的铝粉空气混合物所产生的爆炸波进行点火,对其燃烧转爆轰过程(DDT)进行了分析,并对不同浓度时混合物的燃爆情况进行了比较.浓度为689g/m3的玉米淀粉/空气混合物能在管道中完成燃烧向爆轰的转变,此浓度为本实验系统下的玉米淀粉的爆炸临界浓度上限,下限浓度为459g/m3.     

组合式起落架缓冲器耐坠毁性能仿真与分析

提出了一种油气?泡沫铝组合式直升机缓冲装置,基于塑性坍塌应力理论计算模型和有限元模型对单一泡沫铝冲击压溃应力?应变进行了计算和仿真分析,计算结果和仿真分析结果进行了相互校验.通过单一泡沫铝冲击压溃试验对理论和仿真模型进行了试验验证.将泡沫铝压溃动态特性曲线融入油气?泡沫铝组合式起落架缓冲动力学模型开展耐坠毁性能仿真分析...     

氯离子和温度对铝合金在冷却液中腐蚀的影响

分别采用了动电位极化法、电化学阻抗法研究了不同温度下、不同氯离子浓度下防锈铝在模拟冷却液中的腐蚀行为,采用金相显微镜和扫描电镜对极化后防锈铝的表面特征进行了观察和记录。结果表明,氯离子吸附在防锈铝氧化膜表面,对氧化膜表面造成破坏。在一定温度下（30℃）,当氯离子浓度超过0.01mol/L时,中间产物吸附作用就会增强,阻抗谱中低频区出现感抗弧,点蚀萌生。随着氯离子浓度增高（超过0.01mol/L）,防锈铝的腐蚀加剧,耐腐蚀性能下降。随着温度的升高,阴极和阳极反应阻力变小,阳极金属铝的溶解和阴极氧还原速度增大,腐蚀速度增大。温度升高的同时,溶解氧含量下降,阴极反应受到抑制。与此同时扩散过程在整个腐蚀反应过程中的支配性降低,中间产物在氧化膜表面的吸附作用增强,从而导致低频容抗弧的出现。温度对点蚀形貌的影响主要体现在影响单个点蚀坑的几何大小,促进点蚀坑的生长。