昆虫翅膀图像特征的亚像素级提取方法

昆虫翅脉、翅脉交点及翅膀边缘是昆虫翅膀运动变形三维重构的主要依据.通过分析这三种特征的图像特点,对于翅脉中心,采用Hessian矩阵求出灰度极值点方向,并用二次曲线拟合该方向的灰度变化,通过确定该曲线极值点位置来提取亚象素翅脉中心;然后通过求灰度图像的梯度,在其梯度变化方向求极值点的方法提取翅膀边缘特征;此外根据翅脉方向变化的连续性提出了邻域角度约束方法确定翅脉交叉点,从而最终提取到亚像素级的翅膀边缘、翅脉及交叉点等特征.实际应用证明该方法是较为有效的.     

高应变率下的玻璃钢力学性能的实验研究

利用分离式Ｈｏｐｋｉｎｓｏｎ压杆研究了国产环氧玻璃钢和聚脂玻璃钢在平均应变率约为１０＾３ｓ＾－１下的动态力学性能，给出这两种材料在冲击压缩下的弹性模量和能量吸收率，为新型飞行保护头盔的设计提供了材料的实验依据。     

高温老化过程中推进剂模量变化对药柱结构完整性的影响

将NEPE推进剂在65℃,70℃,75℃下分别老化不同时间后,用动态力学分析仪测定其动态力学性能。利用测试得到的推进剂动态力学特性参数,经计算得出推进剂的平衡模量。随着老化时间增加,其平衡模量值逐渐降低。利用有限元方法,分析在老化过程中推进剂平衡模量的变化对药柱结构完整性的影响,即在高温老化过程中,当NEPE推进剂的平衡模量降低至某一值时,固体火箭发动机药柱的结构完整性破坏。     

丁羟推进剂加速老化中动态弹性模量与力学性能的变化

高固体含量丁羟推进剂在加速老化实验中,用动态粘弹谱仪测得的弹性模量变化与单向拉伸力学性能的变化规律基本相同。根据对三个不同配方的研究表明,利用粘弹谱仪研究推进剂老化和筛选防老剂,方法简便,数据可靠。     

带角度约束的多飞行器编队协同拦截制导律设计

针对多枚飞行器协同拦截同一目标的问题,在最优控制与时间调整相结合的基础上,设计了一种带有时间约束与角度约束的协同制导律。首先,在初始时刻(或中段制导结束时刻),根据初始状态及终端角度约束情况,以指定策略为编队中的各飞行器分配拦截角度。其次,采用线性化最优控制的设计方法,解算带有拦截角度约束的最优导引指令。最后,在求解针对运动目标的飞行器剩余时间估计的基础上,根据一致性的方法推导时间调整项的导引指令。仿真结果表明,在典型背景下,设计的制导律能够使多枚飞行器以特定的编队构型协同拦截同一目标,从而有效提高拦截概率。     

Negative VTEC with spherical harmonic expansion model under different solar activity conditions

The Earth’s ionosphere can be described by a spherical harmonic (SH) expansion up to a specific degree. However, there exist negative vertical total electron content (VTEC) values in the global ionosphere map (GIM) with the SH expansion model. In this contribution, we specifically investigated the negative VTEC values that are induced by the SH expansion model and validated the performance of the inequality-constrained least squares (ICLS) method in eliminating the negative VTEC values. The GPS data from 2004 to 2017 was selected to cover one solar cycle and the experiments under different solar activity conditions were analyzed. The results in our work show that the occurrence of the negative VTEC values is attributed to the deficiency of the SH expansion model when the VTEC itself is small instead of the unevenly distribution of the GNSS stations. The negative VTEC values appear periodically in the temporal domain, showing apparently one year and half year periods. During one year, two peaks in June and December can be observed in the time series of the negative VTEC values. The number of negative VTEC values in June is obvious larger than that in December. During one solar cycle, the number of negative VTEC values under quiet solar activity condition is obvious larger than that under strong solar activity condition. In the spatial domain, the appearance of the negative VTEC values is strongly related with the movement of the subsolar point. In the latitude of the subsolar point has the largest magnitude, the negative values will appear on the opposite hemisphere and the further from the subsolar point the more negative values. The maximum number of the negative VTEC values in the southern hemisphere appears in June, while the peak value in the northern hemisphere appears in December. The maximum number of negative VTEC values in the southern hemisphere is generally larger than that in the northern hemisphere. In addition, the negative VTEC values are distributed both at middle latitude and high latitude in the southern hemisphere, while they are mainly distributed at high latitude in the northern hemisphere. When the ICLS method is used, the negative VTEC values can be eliminated efficiently and it has nearly no influence on the positive VTEC values. The ICLS method can also improve the receiver’s differential code bias (DCB) and significantly decrease the unreasonable negative slant TEC (STEC) values along the lines of sight. Using the final GIM product of the Jet Propulsion Laboratory (JPLG) as a reference, the root mean square (RMS) of the ICLS solution shows maximum 25%, 20% and 45% improvement relative to the least squares (LS) solution at northern high latitude, southern middle latitude and southern high latitude, respectively.     

化学镀镍层对30CrMo及LY12疲劳性能的影响

研究了两种不同磷含量化学镀镍层的组织结构、硬度及弹性模量,并着重研究了３０ＣｒＭｏ及ＬＹ１２经化学镀镍后的旋转弯曲疲劳性能。结果表明,低磷微晶镀层较高磷非晶镀层具有更高的硬度、弹性模量和疲劳抗力;化学镀镍层导致了３０ＣｒＭｏ疲劳强度的显著下降,但能提高ＬＹ１２的疲劳强度,表明化学镀镍层对基体疲劳性能的影响作用主要取决于基体本身疲劳抗力的高低。     

基于非线性约束模型的发动机部件性能衰退研究

引入流量因子和效率因子,通过在稳态模型中修改流量因子和效率因子,模拟几种性能失效形式,分析了它们引起压气机和涡轮测量参数的变化.以发动机稳态模型为基础,构建优化部件性能参数的非线性约束模型,得到部件性能参数的衰退过程.在得到的性能参数基础上,代入到发动机稳态模型,得到对应的测量参数,同时滤掉噪声的干扰.又运用雅克比矩阵建立部件性能参数与测量参数的对应关系,得到的测量参数与非线性结果进行比较,证明了非线性约束模型计算发动机测量参数的优越性     

企业并购过程中的产权制度约束及其对策

企业并购作为存量资源重组的重要形式,其效应已在经济体制改革过程中逐渐显现出来,但是,一个严重缺陷－－产权制度约束,正在成为我国企业并购市场化进程的主要障碍。作者针对目前企业并购的产权制度问题,提出适应炮国企业并购的制度安排和政策建议。     

绳索断裂对二维二次太阳翼展开过程影响分析

为识别二维二次太阳翼关键环节和预示其在轨展开故障模式,开展不同位置绳索断裂失效对太阳翼展开的影响程度分析。采用考虑绳索断裂的绳索联动轮力学模型,建立了适应于不同联动轮半径的联动轮受力模型,提出角度触发约束消除方法,解决了太阳翼第2次展开过程连续仿真问题,建立了太阳翼第2次展开动力学方程,分析了不同位置绳索断裂失效对太阳翼各板展开角度、展开构型和其他绳索张力的影响。分析表明,越靠近星体的绳索联动机构失效对太阳翼展开过程的影响越大,其中连接架上绳索联动机构失效可直接导致二维二次太阳翼在轨展开失败。