基于空间映射的视觉注意力分配预测模型

为预测飞行员视觉注意力分配,在SEEV(Salient Effort Expectancy Value)模型和多因素模型的基础上引入注意控制空间和资源分配空间的概念.前者描述了影响注意力分配因素,而后者则反应了兴趣区域所获得的注意资源.并通过空间映射建立注意力分配的预测模型,应用模糊层次分析的方法对模型进行结算.为验证预测模型效度,采用16名被试在飞行模拟器上开展基于异常信息恢复的工效学实验,通过眼动追踪装置记录注视点分布作为注意力分配指标.被试需要根据实验条件对主飞行显示器仿真界面中的目标信息状态进行监视,并通过驾驶杆的指定操作对异常信息进行响应.实验结果表明,注意力分配预测模型的理论结果与工效实验中注视点分布的实验结果显著相关且吻合较好,验证了预测模型的可用性.     

基于HLA的防空导弹武器系统仿真平台研究

介绍了一个以防空导弹武器系统为背景,基于高级体系结构(HLA, High Level Architecture)技术实现的包含虚拟现实技术的综合仿真平台.着重论述了该仿真平台的构成、开发过程及其关键技术,包括HLA、基于FEDEP(Federation Development and Execution Process)模式的开发过程,层次化软件结构、计算机生成兵力(CGF, Computer Generated Forces)技术、面向对象建模以及基于包围盒的碰撞检测等.     

Comparison of peak characteristics of F2 ionospheric layer over Tehran region at a low solar activity period with IRI-2001 and IRI-2007 models predictions

In the present work values of peak electron density (NmF2) and height of F2 ionospheric layer (hmF2) over Tehran region at a low solar activity period are compared with the predictions of the International Reference Ionosphere models (IRI-2001 and IRI-2007). Data measured by a digital ionosonde at the ionospheric station of the Institute of Geophysics, University of Tehran from July 2006 to June 2007 are used to perform the calculations. Formulations proposed by  and  are utilized to calculate the hmF2. The International Union of Radio Science (URSI) and International Radio Consultative Committee (CCIR) options are employed to run the IRI-2001 and IRI-2007 models. Results show that both IRI-2007 and IRI-2001 can successfully predict the NmF2 and hmF2 over Tehran region. In addition, the study shows that predictions of IRI-2007 model with CCIR coefficient has closer values to the observations. Furthermore, it is found that the monthly average of the percentage deviation between the IRI models predictions and the values of hmF2 and NmF2 parameters are less than 10% and 21%, respectively.     

Modeling and experimental validation of sawing based lander anchoring and sampling methods for asteroid exploration

This paper presents a novel lander anchoring system based on sawing method for asteroid exploration. The system is composed of three robotic arms, three cutting discs, and a control system. The discs mounted at the end of the arms are able to penetrate into the rock surface of asteroids. After the discs cut into the rock surface, the self-locking function of the arms provides forces to fix the lander on the surface. Modeling, trajectory planning, simulations, mechanism design, and prototype fabrication of the anchoring system are discussed, respectively. The performances of the system are tested on different kinds of rocks, at different sawing angles, locations, and speeds. Results show that the system can cut 15?mm deep into granite rock in 180?s at sawing angle of 60°, with the average power of 58.41?W, and the “weight on bit” (WOB) of 8.637?N. The 7.8?kg anchoring system is capable of providing omni-directional anchoring forces, at least 225?N normal and 157?N tangent to the surface of the rock. The system has the advantages of low-weight, low energy consumption and balance forces, high anchoring efficiency and reliability, and could enable the lander to move and sample or assist astronauts and robots in walking and sampling on asteroids.     

基于驻留时间比的近地空间碎片环境建模

为分析近地空间碎片的分布规律,提出了一种以碎片在空间网格内驻留时间为基础的碎片环境统计建模方法.该方法利用多项式拟合和求根方法统计碎片在空间网格内的停留时间,获取模型基础数据,并据此采用多项式预测、插值和时间序列分析等技术,综合分析空间碎片的分布与演化规律.给出了一个基于双行根数(TLE,Two Line Elements)数据的建模实例,该实例通过了ORDEM2000模型的对比验证,并获得了一些更精细的近地空间碎片环境特征.所得建模方法和分析结论可为长期运行的近地航天器轨道设计、碰撞风险评估及防护等提供技术支撑.     

基于多值决策图的温储备系统可靠性建模方法

温储备系统是冷储备与热储备系统的推广,在实际中有广泛应用。针对不可修温储备系统的可靠性建模问题,已有基于多值决策图(MDD)的系统可靠性建模方法。该方法以系统中的单元故障为建模对象,分别构建故障级MDD与系统级MDD,进而获得系统可靠度的解析表达式。然而,该表达式中不同维度积分相互混杂,计算给定时刻的系统可靠度需要首先梳理系统可靠度的表达式,以利用数值方法求解其中的积分。为实现系统可靠度的程序化计算,在已有研究基础上提出将系统级MDD按故障数分解为一系列子决策图,通过对MDD中边的概率重新赋值获得每一子决策图的发生概率,得到系统可靠度的规范形式,形成一套完整的系统可靠度计算方法。