基于CMPSO算法的永磁同步电机转动惯量识别研究

永磁同步电机(PMSM)是一种具有很强非线性的动态系统,在工业驱动应用中发挥着重要作用。实时辨识转动惯量对于高精度PMSM系统控制和稳定性状态监测具有重要意义,但传统转动惯量识别方法精度较低。在传统离散模型参考自适应理论基础之上,用柯西变异粒子群优化(CMPSO)算法代替待辨识参数自适律设计环节,以实现PMSM转动惯量识别。该转动惯量辨识方法充分利用了CMPSO算法的快速高效收敛性,仿真结果和试验结果表明了可行性、正确性和准确性。     

Behavior and functional modeling methods of doubly salient electromagnetic generators for aircraft electrical power system applications

The Doubly Salient Electromagnetic Generator(DSEG) is a promising candidate in aircraft generator application due to the simplicity, robustness and reliability. However, the field windings and the armature windings are strongly coupled, which makes the inductance characteristics non-linear and too complex to model. The complex model with low precision also leads to difficulties in modeling and analysis of the entire aircraft Electrical Power System(EPS). A behavior level modeling method based on modified inductance Support Vector Machine(SVM) is proposed. The Finite Element Analysis(FEA) inductance data are modified based on the experiment results to improve the precision. A functional level modeling method based on input–output characteristics SVM is also proposed. The two modeling methods are applied to a 9 kW DSEG prototype. The steady state and transient process precision of the proposed methods are proved by comparing with the experiment results. Meanwhile, the modeling time consumption, the application time consumption and the calculation resource demand are compared. The DSEG behavior and functional modeling methods provide precious results with high efficiency, which accelerates theoretical analysis and expands the application foreground of the DSEG in the aircraft EPS.     

HB-2 high-velocity correlation model at high angles of attack in supersonic wind tunnel tests

Responding to a need for experimental data on a standard wind tunnel model at high angles of attack in the supersonic speed range, and in the absence of suitable reference data, a series of tests of two HB-2 standard models of different sizes was performed in the T-38 trisonic wind tunnel of Vojnotehnickˇi Institut(VTI), in the Mach number range 1.5–4.0, at angles of attack up to+30°. Tests were performed at relatively high Reynolds numbers of 2.2 millions to 4.5 millions(based on model forebody diameter). Results were compared with available low angle of attack data from other facilities, and, as a good agreement was found, it was assumed that, by implication, the obtained high angle of attack results were valid as well. Therefore, the results can be used as a reference database for the HB-2 model at high angles of attack in the supersonic speed range, which was not available before. The results are presented in comparison with available reference data, but also contain data for some Mach numbers not given in other publications.     

一种通用的设备转动惯量测量方法

在航天领域的控制系统半实物仿真试验中,经常需要获取某些参试设备的转动惯量以进行姿控系统设计.通常这些设备的形状不规则并且内部质量分布不均,仅采用基于外部形状的三维建模方法难以获得较为精确的转动惯量.本文以某项目地面气浮仿真试验中参试设备转动惯量的测量为应用背景,在GJB361A-97关于三线悬吊法测转子转动惯量的基础上.提出了一种通用的不规则设备的转动惯量测量方法,该方法通过简单的测量步骤对形状不规则、质心不确定、质量分配不均、内部构造复杂等参试设备的转动惯量加以精确测量.测量结果表明,该方法所测转动惯量完全能够满足姿控系统设计的相关指标要求.     

旋成体在无侧滑大攻角下的横向气动力特性

介绍具有尖锥头部细长旋成体（以下简称弹体）在无侧滑下横向气动力随攻角变化特性，其中包括尖锥头部顶角、旋成体长细比、初始滚转角、试验雷诺数诸参数对横向气动特性的影响。还介绍美国ＮＡＳＡ的一篇综合研究报告的部分结果。试验结果表明，在低亚音速下，弹体气动特性对上述诸参数反应极为敏感，有时呈现随机特性。头部加边条、减小长细比或在后体装尾翼，将有助于减弱横向气动力。采用弹体旋转飞行技术，虽然产生Ｍａｇｎｕｓ侧向力，但有效地克服了气动力的随机性。     

一种天基光学GEO目标定位方法及初轨算法观测几何评价

提出一种基于天基光学短弧观测数据对GEO区目标进行定位的方法,以GEO区目标半径、偏心率为几何约束,通过最小二乘法估计目标位置、速度,估计结果可作为初轨算法的输入,也可以为初值预测轨道,引导其它平台对目标观测。利用广义Laplace初轨算法对多平台多观测弧段处理,为表征观测几何对定轨性能的影响,将几何精度因子(GOP)扩展到多平台多观测弧段,并引入几何精度因子的误差灵敏度(ESGOP)表征测量误差对观测几何的影响,仿真结果表明:对GEO目标而言,当GOP不小于0.03、ESGOP不大于0.005时,对目标的初轨精度可控制在50km之内。     

天基轻气炮发射清除低轨碎片方案及关键技术分析

文章分析了现有的空间碎片清除方式,并以800~1200 km低地球轨道高度上1~10 cm量级的空间碎片为清除目标,提出了天基轻气炮清除碎片的新方法。首先分析了轻气炮有效载荷在典型参数下的弹丸加速能力;之后根据将碎片降轨使其坠入大气层烧毁的设想,提出天基轻气炮共面清除碎片的方式,并选择轨道高度800 km的圆轨道作为碎片运行轨道进行可行性分析。计算表明,对半径10 cm、厚度1 cm的铝合金圆板碎片(质量211.95 g),使用初速1 km/s、重10 g的黏性弹丸可按任务方案达到清除效果。此外,计算出该参数弹丸对轨道高度800~1200 km的圆轨道上可清除的最大碎片质量为500~825 g,证明轻气炮弹丸对1~10 cm的碎片具有较强的清除能力。最后,分析了以轻气炮为有效载荷的航天器在完成清除碎片任务时的关键技术。     

多自由度振动环境下惯组非线性传递特性研究

惯组作为飞行器姿控系统的传感器,其局部安装结构的传递特性的测量精度直接关系到导航精度。目前,惯组普遍使用减振器进行隔振,而减振器都呈现出较强的非线性特征。为了考察惯组在不同工况下的传递特性,将惯组简化为六自由度Duffing模型,推导了基础激励下系统的运动微分方程,并用龙格-库塔法对方程进行求解,分析了自由衰减振动和强迫振动下不同工况的系统传递特性。结果表明,多自由度激励比单自由度激励工况得到的系统传递特性的频率和幅值都低。考虑到惯组真实的使用环境,应当在多自由度振动环境下进行传递特性试验。     

基于产业思维的航天发射服务研究

首先从核心驱动出发提出航天发展三阶段第一推动力,从产业要素出发分析航天产业进阶的市场、技术和产业政策三要素。而后从价值链出发研究航天产业产值分布和产业整合策略。最后分析了新兴航天发射服务公司的模式、产品和技术,为我国航天发射服务提供参考。     

一种低轨双星雷达信号无模糊频差估计算法

针对低轨双星组合接收低脉冲重复频率(LPRF)雷达信号的频差(DFO)估计存在模糊的问题,提出一种基于时差差分的频差无模糊高精度估计算法,该算法通过对高精度的时差测量值进行中心差分获得无模糊的频差估值。仿真结果表明,新算法能对PRF低至300 Hz的雷达信号进行无模糊的频差估计,估计精度在信噪比高于15 dB时逼近克拉美劳下界,可有效扩大低轨双星时/频差定位系统对LPRF信号的适用范围。