光纤陀螺多通道并行自动测试工艺技术

针对光纤陀螺测试过程中,测试项目多、步骤复杂、测试时间长、人为记录数据容易出错等问题,在分析测试内容的基础上提出多通道并行测试方案,设计测试工装、电缆、电路等硬件系统,开发相应的测试软件。与单只光纤陀螺测试方法相比,能够有效地减少光纤陀螺的测试时间,提高测试效率。     

Design and optimization of a novel electrically controlled high pressure fuel injection system for heavy fuel aircraft piston engine

The heavy fuel compression ignition engines are widely equipped as aircraft piston engines. The fuel injection system is one of the key technologies that determines the performance of engine. One of the main challenges is to precisely control the injected fuel quantity and flow rate in the presence of pressure fluctuation. This challenge is even more serious for heavy fuel. An original design for electrically controlled high pressure fuel injection system called Multi-Pumppressure-reservoirs fuel injection System(MPS) was demonstrated to reduce the pressure fluctuation and help keep injection stable. MPS was compared with an ordinary high pressure Common Rail fuel injection System(CRS). This work established one-dimensional AMESim and mathematical models for both CRS and MPS to study the effect of different structures and geometric parameters on the pressure fluctuations. The calculations show that the average fuel pressure fluctuation of MPS can be reduced by 57% for the crankshaft speed of 1900 r/min, and the pressure fluctuation before injection reduced by 100%. It is concluded that the pressure performance of MPS is less sensitive to pressure reservoir volume than that of CRS, and there is an opportunity for further volume reduction.     

Modeling and control for cooperative transport of a slung fluid container using quadrotors

In this paper, dynamic modeling and control problem for transfer of a sloshing liquid container suspended through rigid massless links from a team of quadrotors are investigated. By the proposed solution, pose of the slung container and fluid sloshing modes are stabilized appropriately. Dynamics of the container-liquid-quadrotors system is modeled by Euler-Lagrange method. Fluid slosh dynamics is included using multi-mass-spring model. According to derived model, a proper control law is designed for a system with three or more quadrotors. Implementing the proposed control law, quadrotors can control pose of the container, directions of the links and liquid sloshing modes simultaneously. Stability of closed loop system of tracking errors and sloshing modes are demonstrated using a theory of singularly perturbed systems and Lyapunov stability theorem. Also, the capability of the proposed feedback control laws in solving a formerly organized transport problem of a liquid filled container has been demonstrated in simulations. Moreover, priority of the proposed control scheme to an existing slung load controller in the literature is demonstrated.     

航空发动机空气管路应力优化设计

针对航空发动机空气管路系统受载应力及应变过大的问题,对该系统进行3维全尺寸弹塑性分析,讨论了载荷加载过程对应力应变的影响;对应力较大部位采用结构分解方法建立优化模型,进行管路部件应力优化,获得三通结构尺寸优化结果;利用参数灵敏度分析结果选择合适的设计变量,建立系统管线优化模型,补偿热-位移载荷产生的附加应力。优化结果显示,最大总应力降低5.49%,附加载荷应力降低12.28%。验证了方法的有效性。     

浅析民用飞机研制总体参数优化

分析了在概念设计阶段民用飞机总体设计工作内容和工作流程,并结合时下国外在用软件优缺点,构思了民用飞机总体设计参数综合优化的技术方案,包括优化设计架构、分析模型和优化算法等,为形成具有自主知识产权的民机总体设计综合分析和优化程序打下基础。     

Modeling and experimental validation of sawing based lander anchoring and sampling methods for asteroid exploration

This paper presents a novel lander anchoring system based on sawing method for asteroid exploration. The system is composed of three robotic arms, three cutting discs, and a control system. The discs mounted at the end of the arms are able to penetrate into the rock surface of asteroids. After the discs cut into the rock surface, the self-locking function of the arms provides forces to fix the lander on the surface. Modeling, trajectory planning, simulations, mechanism design, and prototype fabrication of the anchoring system are discussed, respectively. The performances of the system are tested on different kinds of rocks, at different sawing angles, locations, and speeds. Results show that the system can cut 15?mm deep into granite rock in 180?s at sawing angle of 60°, with the average power of 58.41?W, and the “weight on bit” (WOB) of 8.637?N. The 7.8?kg anchoring system is capable of providing omni-directional anchoring forces, at least 225?N normal and 157?N tangent to the surface of the rock. The system has the advantages of low-weight, low energy consumption and balance forces, high anchoring efficiency and reliability, and could enable the lander to move and sample or assist astronauts and robots in walking and sampling on asteroids.     

基于故障行为的惯导产品贮存寿命试验设计

以典型惯导产品加速度计贮存寿命评估为例,提出了一种基于故障行为模型的加速退化试验设计方法,解决了缺乏预试验数据情况下试验应力水平设计的问题。在通过对产品特性和主机理分析基础上,确定表征产品贮存寿命特征参数及试验应力,构建了考虑材料等分散性的加速度计故障行为模型,用以描述参数加速时变规律的特性。在试验应力最高水平确定的情况下,基于给定置信度和故障行为模型,以高应力水平下退化量的置信下限与低应力水平下退化量的置信上限不交叉为原则,采用基于仿真的加速退化试验设计方法,优化确定低应力和中间应力水平,从而设计给出试验剖面,并给出了加速退化试验方案优选流程,最终从备选方案集中确定加速度计试验最优方案。通过实际案例分析,验证了该方法的有效性。      

跨声速层流翼型的混合反设计/优化设计方法

跨声速层流翼型设计须兼顾优良的超临界特性和自然层流特性,因而对设计方法提出了更高的要求。针对现有反设计方法和直接优化设计方法的不足,发展了一种适用于跨声速层流翼型的混合反设计/优化设计方法。该方法引入了基于经验的局部流场特征作为反设计目标,翼型性能指标作为直接优化设计目标,然后加权形成了混合反设计/优化设计总目标,并同时考虑了气动和几何约束。优化算法采用基于自适应并行加点技术的代理优化,流动数值模拟采用耦合基于线性稳定性理论的e^N转捩自动判定的雷诺平均Navier-Stokes（RANS）方程求解器。针对现代中短程民用客机需求,以NPU-LSC-72613翼型为基准,开展了层流翼型减阻的混合反设计/优化设计。分别将局部目标压力分布、总阻力作为反设计和直接优化设计目标,得到了较好的优化结果,验证了方法的有效性。经过2轮优化结果显示混合反设计/优化设计总目标显著下降。所设计翼型吸力面局部压力分布与目标压力分布基本一致,总阻力下降15.5%;吸力面和压力面层流范围均大于55%倍弦长,激波强度显著减弱,说明所设计翼型同时具有优良的超临界和层流特性。将所设计翼型配置到机翼上,通过三维数值模拟进行校验,结果显示所设计跨声速层流机翼升阻比提高了6.64%,在一定升力系数范围内,气动性能均有显著提高,验证了所设计跨声速层流翼型在机翼设计中的适用性。     

缩比发动机喷嘴热喷流噪声试验

为深入了解涡扇发动机喷流噪声特性,验证喷流噪声降噪方法,建立发动机喷流噪声数据库,在法国国家航天航空研究中心的CEPRA19声学风洞开展了缩比发动机喷嘴热喷流噪声试验测试工作。针对发动机热喷流模拟系统,设计加工了面积比（外涵喷嘴面积与内涵喷嘴面积之比）为5和7的两种喷嘴构型试验模型。通过减小高温区域单个零件长度尺寸和零件壁厚的方法,降低热膨胀对模型尺寸的影响。在声学风洞中完成了不同工况条件下两种面积比圆形喷嘴和锯齿形喷嘴的远场噪声特性测试。通过对远场测量噪声频谱进行分析,发现随着来流速度的增大喷流噪声会减小,采用锯齿形喷嘴设计在中低频喷流噪声水平降低,在高频噪声水平有所增加。     

一种空间超大型可展开柔性聚光器

面向空间太阳能电站（SSPS）对大口径太阳能聚光器的应用需求,提出一种超大型、轻量化、高精度的空间可展开柔性聚光器的新构型。采取理论建模、计算仿真、优化设计相结合的方法对其抛物面构型原理、展开机构折展原理、展开态结构稳定性、动态聚焦精度等问题进行研究,并完成大口径可展开柔性聚光器的设计。提出了基于多层弹性花瓣镜体复合结构的大口径柔性聚光器优化创新设计方法。由于采用薄板柔索结构,本聚光器具有精度高、展收体积比大、质量轻、在线控制简单等优点,为空间太阳能电站千米级聚光器提供一种创新设计方法。