无网格法耦合RNG k-ε湍流模型在亚、跨声速翼型黏性绕流中的数值模拟

基于移动最小二乘无网格方法,耦合RNG(Re-Normalisation Group)k-ε湍流模型求解雷诺平均Navier-Stokes方程。采用AUSM(Advection Upstream Splitting Method)+-up迎风格式求解数值通量,应用在高度各向异性点云结构中取得良好结果的点云重构技术结合移动最小二乘法拟合空间导数,并用三阶SSP(Strong Stability Preserving)型Runge-Kutta显式时间推进格式求解离散后的控制方程。在此基础之上,实现了对NACA0012、RAE2822翼型亚、跨声速黏性绕流的数值模拟,给出了翼型表面压力系数分布曲线、不同位置处的平均速度剖面、马赫数等值线等计算结果,并与实验值及相关文献数值模拟结果进行比较,结果吻合较好。表明所发展的结合点云重构技术的无网格方法耦合RNGk-ε湍流模型能够成功模拟翼型亚、跨声速黏性绕流,验证了所提算法的有效性,并拓展了无网格方法求解湍流流动的途径。     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication（MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm³, respectively. The specific grinding energy significantly decreased to 32.7 J/mm³ in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%,respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%,and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS₂, carbon nanotube（CNT）, and ZrO₂ nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS₂ nanoparticle was only 32.7 J/mm³, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS₂ nanoparticle, which indicated its remarkable lubrication effects. Furthermore,the role of MoS₂ particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS₂ volume concentrations of 1%, 2%, and 3% were used.Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS₂ nanoparticle volume concentration increased.Satisfactory grinding surface lubrication effects were obtained with 2% MoS₂ nanoparticle volume concentration.     

大型枢纽机场中转水平评估研究

为了有效评估我国枢纽机场的中转水平,全面掌握枢纽机场发展中所面临的问题,构建了大型枢纽中转水平评估模型,并以中美欧三个国家和地区典型的大型枢纽为例进行实证分析。研究表明,与美国和欧洲大型枢纽的中转水平相比,我国大型枢纽的中转水平仍有很大差距;我国国内中转航班的中转水平远远低于美国,国内国际互转航班的中转水平与美国相当,国际转国际航班的中转水平高于美国;与欧洲三大国际枢纽的中转水平相比,我国北京首都机场与国际相关的水平中转仍有所不足。     

基于结构动力学特性的损伤识别方法

基于等效模态应变/动能理论,提出了一种利用实际结构的测试数据识别结构中损伤位置的方法。在此基础上,研究了利用模型修正技术识别结构中损伤强度的方法。分别以一个单损伤平板结构和多损伤平板结构为例,通过仿真分析了以上方法的有效性。结果表明,以上方法可以有效识别结构中的损伤位置和损伤强度。     

嫦娥三号着陆器统计定位精度分析

“嫦娥三号”将在月球放置着陆器,实现月面软着陆,因此,需要对着陆器进行精确定位.本文简述了月球着陆器的统计定位方法与协方差分析理论,分析了影响统计定位精度的主要误差源.基于现有测控条件,从跟踪弧段和测量数据组合2个方面,对“嫦娥三号”着陆器的定位精度进行了分析.针对短弧条件下单站测距数据定位不稳键的问题,提出了结合月面高程约束的定位方法.协方差分析结果表明：高程数据的使用可以实现单站30 min测距优于1 km的定位精度;当观测数据累积至3d时,单站测量与VLBI（Very Long Baseline Interferometry,甚长基线干涉测量）的不同组合可以实现同等量级、优于百m的定位精度;测量系统差是制约定位精度的主要因素,完全标校测量的系统偏差则能实现10 m左右的定位精度.     

基于概率统计的DS/FH系统干扰检测算法

基于时频分布的干扰检测算法是DS/FH（Direct Sequence/Frequency Hopping,直接序列扩频/跳频扩频）系统干扰检测的传统手段,针对其运算量大、实时性差,以及无法检测某些特殊干扰信号等问题,提出一种基于概率统计的干扰检测算法.通过统计DS/FH系统频谱图中各频率的幅值出现位置,以DS/FH信号与干扰信号频谱分布规律的差别为判决依据,完成DS/FH系统中干扰信号的检测.分析和仿真结果表明：该检测算法能够有效识别DS/FH系统中的典型干扰信号,与传统基于时频分布的检测算法相比,能够实现某些特殊干扰信号的有效检测;同时,由于该算法不需要进行复杂的时频联合分析,其运算复杂度大大降低,能够实现DS/FH系统干扰信号的快速检测.     

无线电高度表信号模拟器射频信号延时/衰减模块设计

无线电高度表程控信号模拟器是无线电高度表自动测试系统（ATE,ATS）的重要组成部分,而射频信号延时/衰减模块则是无线电高度表程控信号模拟器3个功能模块组件中的核心模块。研制了一种采用声表面波（SAW）延迟线作为射频信号延时器件、射频衰减器作为射频信号功率衰减器件,通过程控射频开关控制不同声表面波延迟线的切换,包含射频信号变频、放大等结构电路的无线电高度表信号模拟器射频信号延时/衰减模块。经无线电高度表自动测试系统的实际工程应用表明,该无线电高度表射频信号延时/衰减模块对C波段（4.2～4.4 GHz）射频调制信号的延时精度高、衰减范围大,体小、质轻,适合置于无线电高度表测试适配器内部使用,具有较高的工程应用价值。     

尾缘锯齿结构的降噪物理机制实验

对比分析了常规尾缘翼型与锯齿尾缘翼型尾缘湍流流场的基本特征,并通过线阵列的方法测量了两种尾缘结构的噪声.结果表明:锯齿尾缘翼型尾缘湍流流场的湍流强度以及3个方向上的湍流强度都相比于常规尾缘翼型有显著减少,声场结果显示锯齿尾缘翼型对尾缘噪声有显著减小,对前缘噪声影响很小.锯齿结构加宽了尾迹区域并加快了大涡的破碎,产生了额外的马蹄涡,湍流脉动衰减率沿着流动方向变大.      

LIPS-200离子推力器放电室原初电子动力学行为的数值模拟研究

为了得到试验测量不到的气体放电过程中电磁场作用下单个原初电子的动力学行为,建立了LIPS-200离子推力器放电室二维仿真模型,应用网格粒子法(PIC)和蒙特卡洛碰撞(MCC)模拟法对其进行了研究。模拟得到在额定工况下原初电子和中性原子之间的碰撞概率、原初电子损耗率、电磁场分布对其运动速度及运动轨迹的影响等。结果表明磁铁表面磁感强度最大,越靠近放电室内部磁感强度越小,对称轴区域无磁场分布,原初电子在电磁场作用下沿磁力线作加速螺旋运动;运动等离子体的自洽电势大小范围仅为0~2.0V,几乎不会影响等离子体运动;对应总原初电子个数为1.2×106时直接被阳极表面吸收的损耗率仅为0.02%。