装备激励约束定价模式机理对比分析与设计

激励约束定价模式能够极大调动承包商积极性，是控制装备成本的一种重要方法。通过深入分析美军激励约束定价模式和我军激励约束定价模式的设计机理，提出了承包商的期望利润和军方期望价格的计算方法，并通过对比不同定价模式的特点，在借鉴2种激励约束定价模式优点基础上，设计了一种新的激励约束定价策略，提出了指导装备激励约束定价模式改革的对策建议。最后，通过算例对本文方法进行了解释，同时验证了本文方法的有效性。     

Full characterization of a compact 90Sr/90Y beta source for TID radiation testing

A new methodology for Total Ionizing Dose (TID) tests is proposed. It is based on the employment of an on-chip ⁹⁰Sr/⁹⁰Y beta source as alternative to standard methods such as ⁶⁰Co gamma rays and electrons from LINAC. The use of a compact beta source for TID tests has several advantages. In particular, the irradiation of devices with more than one radiation source results in a better representation of the complex space radiation environment composed of several types, energies and dose-rates. In addition, the use of an easy handling beta source allows the irradiation of electronic devices without any damage to other auxiliary circuit. In this work, ⁹⁰Sr/⁹⁰Y beta source dosimetry and related radiation field characteristics are discussed in depth.In order to validate the proposed source for TID tests, a rather complex device such as the “SPC56EL70L5” microcontroller from ST-Microelectronics was exposed to ⁹⁰Sr/⁹⁰Y beta rays. The results of this test were compared to that of a previous test of another sample from the same lot with a standard gamma ⁶⁰Co source. The electronic performances following the two irradiations have been found to be in excellent agreement, by demonstrating therefore the validity of the proposed beta source for TID tests.     

Feasibility evaluation of failure models for predicting forming limit of metal foils

Forming limit of metal foil is an important index to evaluate its formability, and is of considerable significance to improve the quality of products. The ductile fracture (DF) behavior in microscale plastic deformation is remarkably affected by the geometry and grain size. To explore the size-dependent forming limit curve (FLC), the Holmberg and Marciniak tests of SUS304 foils with the thicknesses of less than 0.1 mm and diverse grain sizes were performed. In addition, the validity and feasibility of three types of existing failure models including Swift/Hill, Marciniak-Kuczynski (M-K) and DF criteria for predicting the micro-scaled FLCs were discussed. It is found that the Swift/Hill model possesses the worst accuracy with predicting deviation above 50%. Four classical DF criteria including Freudenthal, Ayada, Brozzo and Oh show great difference, and Oh model considering plastic anisotropy presents the best precision. The predicted deviation of M-K model is aggravated with increasing grain size and decreasing foil thickness, which is attributed to the intensified free surface roughening and transformation of fracture mechanism with miniaturization. This research thus provides a deeper understanding and valuable reference for the widespread application of FLC in microforming.     

航空发动机低压转子系统的“可容模态”设计及实验验证

建立了带弹性支承和阻尼器的航空发动机低压柔性转子动力学模型,进行了模态计算以及临界转速处的响应计算。在考虑临界转速约束与“临界跟随”现象约束的条件下,综合模态不平衡影响因子、弹支应变能占比以及套齿连接结构稳定性构造了可容度评价函数,建立了低压转子系统的“可容模态”优化设计方法。设计并搭建了低压转子实验系统,从模态测试实验、阻尼器减振实验以及长时间“共振”实验,验证了设计方法的可靠性。研究结果为计算的临界转速与实际测量的临界转速最大误差为3.86%,阻尼器在1阶与2阶临界转速处的减振比最大可达45.6%,实验转子系统在1阶与2阶临界转速处各完成了长达412.5 s和429.8 s的“共振”实验,共振过程中转子系统各通道振动单峰值稳定在100μm以内,且无次谐波产生。表明了所建立的航空发动机低压转子系统“可容模态”优化设计方法是可行的。     

Gaussian mixture model based adaptive control for uncertain nonlinear systems with complex state constraints

This paper addresses an uncertain nonlinear control system problem with complex state constraints and mismatched uncertainties. A novel Gaussian Mixture Model(GMM) based adaptive PID-Nonsingular Terminal Sliding Mode Control(NTSMC)(GMM-adaptive-PID-NTSMC)method is proposed. It is achieved by combining a GMM based adaptive potential function with a novel switching surface of PID-NTSMC. Next, the stability of the closed-loop system is proved.The main contribution of this paper is that the GMM meth...     

三维五向编织复合材料的冲击压缩特性及破坏机制

利用分离式霍普金森压杆(split Hopkinson pressure bar,SHPB)实验系统和高速摄像技术对三维五向碳/环氧编织复合材料的动态压缩特性进行研究。通过对编织角为22.3°的试样分别进行沿纵向和横向方向的冲击压缩实验,得到材料在200~1200 s^-1应变率范围内的应力应变曲线,并结合高速摄像记录的动态压缩过程,对不同应变率下材料在高速变形下的渐进破坏规律进行分析。同时,综合试样的宏观破坏特征和微观断口形貌特征,进一步分析材料的破坏模式及破坏机理。结果表明:随着应变率的增加,材料在纵向和横向均具有一定的应变率强化效应,在横向方向的应变率强化效应更为显著;不同加载方向下材料的渐进破坏过程、应力应变曲线特征以及破坏方式均具有明显差异,且随着应变率的增加而发生改变。     

论飞机强度规范的发展

简要叙述了美国军用飞机强度规范的历史演变;美国空军ＭＩＬＡ－８７２２１飞机结构通用规范的专业性质及ＭＩＬ－Ａ－８７２２１与ＭＩＬ－Ａ－００８８６０飞机强度和刚度规范的关系。通过对美国规范的理解和我国飞机研制及强度规范现状的分析,论证了我国新规范应是ＧＪＢ６７．１～１３－８５军用飞机强度和刚度规范的进一步发展,新规范发布实施后,ＧＪＢ６７．１～１３－８５将被取代。还叙述了我国新规范的适用范围和编制的技术途径。     

数控系统在S域和P域的分析设计方法

讨论一种典型的采样控制系统──直接数字控制（ＤＤＣ）系统（简称数控系统）在Ｓ域和Ｐ域的分析设计方法。根据采样控制系统理论,从数控系统在Ｚ平面的稳定性判据出发,利用ｔｕｓｔｉｎ变换（Ｐ变换）,通过Ｚ平面、Ｓ平面和Ｐ平面之间的映像关系,导出数控系统在Ｓ域和Ｐ域的稳定性判据,进而提出了数控系统在Ｓ域和Ｐ域的分析设计方法,并详细说明了这两种设计方法的具体方法与步骤。     

制导航空炸弹变结构控制器设计

针对制导航空炸弹的滚转通道,设计了一种具有线性部分变结构控制器。基于弹体模型的时变特性,该控制器首先设计切换函数以确定滑动模态动特性,附加以参数变化范围内的定常模型为对象的线性部分用以控制趋近模态。对某型号制导炸弹设计变结构控制律,仿真结果表明能较好地适应系统的参数变化,提高控制精度,系统具有良好性能。     

运载火箭起飞噪声环境缩比模型试验方法

基于相似理论建立缩比模型试验相似准则,提出了火箭发动机喷流声场试验预示方法的流程。通过缩比模型系留点火试验,根据几何相似、喷流参数相似、发射环境相似来预示起飞噪声环境,在国内首次给出了运载火箭表面的噪声环境的空间相关特性,结果表明预测结果与遥测数据之差小于1.5 dB,校验了缩比模型方法的有效性。缩比模型方法对于我国新一代运载火箭的起飞噪声环境预示、噪声载荷设计、地面试验具有重要意义。