非平稳信号的双重中值容错平滑算法

平滑是消除或削弱测量数据随机误差时常用的数据处理手段。文章建立了一组新的非平稳数据序列容错平滑算法，其采用两阶段两次滑动中值与滑动均值平滑组合，实现了数据简化与平滑的统一。理论分析和仿真计算结果证实，算法可有效避免斑点型异常数据的不利影响，有效削弱随机误差的影响，改进数据处理精度和数据处理结果可靠性。     

应用分力合成方法提高系统性能指标的研究

提出了将柔性结构的分力合成主动振动抑制方法和反馈控制律结合使用来提高柔性结构控制系统性能指标的方法。应用该方法仅需要知道闭环系统及柔性振动的频率及阻尼，而且可以同时抑制任意多个振动模态（包括控制器引起的振动，柔性振动及其他形式的振动），分力合成方法对频率及阻尼的不确定性具有较强的鲁棒性，使该方法易于工程实现，文章针对单柔性杆，将分力合成主动振动抑制方法和反馈控制相结合，设计了不同形式的大角度机动控制律，数值仿真和试验结果充分验证了方法的有效性。     

防静电白色热控涂层的空间环境性能试验

通过在氧化锌晶格中掺入重金属离子，得到具有防静电功能的白色颜料，再以丙烯酸树脂为粘合剂制备出空间飞行器外表面用的ACR－1防静电白色热控涂层；研究了空间环境效应（包括紫外辐照，电子和质子辐照）对该热控涂层太阳吸收率的影响并与有机硅白色热控涂层进行了比较，地面模拟空间环境试验研究结果证明，ACR－1防静电白色热控涂层具有良好的空间稳定性。     

基于FPGA的高准确度数字频率信号源设计

介绍了直接数字频率合成技术的实现方法,分析了其优越的技术特性。根据其特性,利用FPGA设计了高准确度的数字频率信号源。仿真结果表明,与传统的信号源相比,使用该方法实现的信号源,其信号种类多,准确度高,满足测试设备数字化、软件化的趋势。     

Advances in fabrication of ceramic corundum abrasives based on sol–gel process

Corundum abrasives with good chemical stability can be fabricated into various free abrasives and bonded abrasive tools that are widely used in the precision machining of various parts. However, these abrasives cannot satisfy the machining requirements of difficult-to-machine materials with high hardness, high strength, and strong wearing resistance. Although superhard abrasives can machine the above-mentioned materials, their dressing and manufacturing costs are high. By contrast, ceramic corundum abrasives fabricated by sol–gel method is a cost-effective product between conventional and superhard abrasives. Ceramic corundum abrasives exhibit self-sharpening and high toughness. In this review, the optimization methods of ceramic corundum abrasive properties are introduced from three aspects: precursor synthesis, particle shaping, and sintering. Firstly, the functional mechanism of seeds and additives on the microstructural and mechanical properties of abrasives is analyzed. Specifically, seeds can reduce the phase transition temperature and improve fracture toughness. The grain size and uniformly dense structure can be controlled by applying an appropriate amount of multicomponent additives. Then, the urgent need of engineering application and machinability of special shape ceramic corundum abrasives is reviewed, and three methods of abrasive shaping are summarized. The micromold replication technique is highly advanced and can be used to prepare functional abrasives. Additionally, the influence of a new sintering method, namely, two-step sintering technique, on the microstructural and mechanical performance of ceramic corundum abrasives is summarized. Finally, the challenge and developmental trend of the optimization of ceramic corundum abrasives are prospected.     

Machining of a film-cooling hole in a single-crystal superalloy by high-speed electrochemical discharge drilling

Single-crystal superalloys are typical advanced materials used for manufacturing aeroengine turbine blades. Their unique characteristics of high hardness and strength make them exceedingly difficult to machine. However, a key structure of a turbine blade, the film-cooling hole,needs to be machined in a single-crystal superalloy; such machining is challenging, especially considering the increasing levels of machining efficiency and quality demanded by the aeroengine industry. Tube electrode high-speed electrochemical discharge drilling(TSECDD), a hybrid technique of high-speed electrical discharge drilling and electrochemical machining, provides high machining efficiency and accuracy, as well as eliminating the recast layer. In this study, TSECDD is used to machine a film-cooling hole in a nickel-based single-crystal superalloy(DD6). The Taguchi methods of experiment are used to optimise the machining parameters. Experimental results show that TSECDD can effectively drill the film-cooling hole; the optimum parameters that give the best performance are as follows: pulse duration: 12 ls, pulse interval: 30 ls, peak current:6 A, and salt solution conductivity: 3 m S/cm. Finally, a hole is machined by TSECDD, and the results are compared with those obtained by electrical discharge machining. TSECDD is found to be promising for improving the surface quality and eliminating the recast layer.     

Advances in critical technologies for hypersonic and high-enthalpy wind tunnel

Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster, higher and further. The great progress has been achieved during the recent years and their critical technologies are still in an urgent need for further development. There are at least four kinds of hypersonic and high-enthalpy wind tunnels that are widely applied over the world and can be classified according to their operation modes. These wind tunnels are named as air-directly-heated hypersonic wind tunnel, light-gas-heated shock tunnel, free-piston-driven shock tunnel and detonation-driven shock tunnel, respectively. The critical technologies for developing the wind tunnels are introduced in this paper, and their merits and weakness are discussed based on wind tunnel performance evaluation. Measurement techniques especially developed for high-enthalpy flows are a part of the hypersonic wind tunnel technology because the flow is a chemically reacting gas motion and its diagnosis needs specially designed instruments. Three kinds of the measurement techniques considered to be of primary importance are introduced here, including the heat flux sensor, the aerodynamic balance, and optical diagnosis techniques. The techniques are developed usually for conventional wind tunnels, but further improved for hypersonic and high-enthalpy tunnels. The hypersonic ground test facilities have provided us with most of valuable experimental data on high-enthalpy flows and will play a more important role in hypersonic research area in the future. Therefore, several prospects for developing hypersonic and high-enthalpy wind tunnels are presented from our point of view.     

基于SMP机群的航空CFD并行技术应用研究

针对SMP机群的双层并行体系结构,研制出一种双层并行技术--在计算节点间采用MPI消息传递模式并行,而在计算节点内部采用OpenMP编译器指令模式并行.通过算例测试证明,采用该技术的航空CFD程序,并结合贪婪负载平衡分配技术进行并行计算,其效率可达94%,计算结果与实验值吻合.     

永磁同步电机驱动太阳翼扰动力矩建模与仿真

建立太阳翼驱动机构(SADA)永磁同步电机的电磁方程,并利用固定界面模态综合法建立SADA驱动太阳翼耦合系统的振动方程;设计模拟柔性负载,对SADA驱动该柔性负载的扰振力矩进行仿真分析。结果表明,SADA驱动柔性负载运行过程中所产生扰振力矩主要由两个原因引起：1)电流噪声引起的力矩波动;2)控制参数选取不当引起的转角波动。     

大型星载天线桁架式可折展机构的模态分析

大型空间抛物柱面星载天线具有口径大、约束弱、刚度低、质量小等特点,其机构的空间稳定性直接决定天线的使用寿命和信息传输的可靠性。为准确获得大型空间星载天线在轨稳定性能参数,依据星载天线的高精度和长寿命的设计需求,提出一种新型抛物柱面星载天线结构形式,利用有限元仿真对该新型星载天线作模态分析,并分析相关参数。结果表明:采用Al7075材料的新型抛物柱面星载天线基频满足设计要求。同时,增加上下支杆和上下斜撑杆的截面尺寸可有效提高天线结构的固有频率。该研究为我国大型抛物柱面星载天线设计提供了理论支撑和技术参考。