用于微型涡轮机的节流孔式静压气浮轴承实验

对用于厘米级微型涡轮发动机的径向静压气浮轴承展开了实验研究,分析了长径比、节流孔径、气膜间隙及供气压力等对承载力、刚度和耗气量的影响.提出了这些设计参数的优选方法,并结合直径11 cm的某微型喷气发动机,给出了与之匹配的径向静压气浮轴承设计方案:工作面直径15 mm、长度17.5 mm、节流孔径0.35 mm、气膜间隙25μm.此方案在供气绝对压力2.5 kPa时,双轴承支撑能力为13.72 N,耗气量小于1.0 g/s,有效地满足了微型涡轮发动机要求.      

星载大型网状天线非线性结构系统有限元分析

论述了大型网状可展开天线的非线性理论模型及其非线性模拟有限单元模型,并以一副4．2m天线为例进行了有限元建模分析,获得了这类天线的动力学振动特性。研究结果表明：拉索几何非线性和间隙接触非线性对大型网状天线系统的动力学特性具有较大影响。     

Multiple hierarchy risk assessment with hybrid model for safety enhancing of unmanned subscale BWB demonstrator flight test

To explore the low-speed characteristics of the Blended-Wing-Body (BWB) configuration for future civil aircraft, a series of unmanned subscale demonstrators have been developed and tested by our research team. During this process, specific safety risks deriving from uncertain design features, system unreliability, and insufficient personnel experience caused continuous flight test mishaps and the risk mechanism was not clear. Local and trial-and-error learning driven safety improvements took few effects on mishap prevention, so our focus was turned to look for systematic safety strategies. This paper establishes a systems theory based hybrid model to integrate the physical system reliability analysis techniques with the system dynamics method for illustrating the multiple risk interactions of the demonstrator flight test involving organizational, human resource and technical system factors. Using the prior BB-5 demonstrator as a case, the hybrid model simulation represents its historical risk evolution process, which verifies the model rationality. Derived risk control strategies reduced the mishap rate of a new demonstrator called BB-6 Sprit. The paper also shows the extended hybrid model can be applied on safety management of unmanned aerial vehicles from the initial period of vehicle development.     

基于负载变化的超声振子电学性能试验研究

针对超声波加工中振幅衰减和振幅不稳定现象,通过超声振子的静态加载试验,分析了轴向与径向加工负载力对超声振子电学特性的影响规律,以及超声振子电学参数的变化对超声振幅的影响机制。结果表明,超声振子的电学参数在径向负载力与轴向负载力的影响下有相似的变化趋势,即超声振子谐振频率与动态电阻随着负载力的增加而单向增大,动态电感与动态电容有相反的变化趋势,二者的综合效果使谐振频率随着负载力的增加而增大,静态电容在一定范围内波动,当超声振子所受的负载力增大到一定值时,超声振子的低频谐振点会消失。依据理论分析与试验研究结果,提出了改善振幅衰减和振幅不稳定现象的措施。     

Nonlinear aeroelastic analysis of the folding fin with freeplay under thermal environment

The nonlinear aeroelastic behavior of a folding fin in supersonic flow is investigated in this paper. The finite element model of the fin is established and the deployable hinges are represented by three torsion springs with the freeplay nonlinearity. The aerodynamic grid point is assumed to be at the center of each aerodynamic box for simplicity. The aerodynamic governing equation is given by using the infinite plate spline method and the modified linear piston theory. An improved fixed-interface modal synthesis method, which can reduce the rigid connections at the interface, is developed to save the problem size and computation time. The uniform temperature field is applied to create the thermal environment. For the linear flutter analyses, the flutter speed increases first and then decreases with the rise of the hinge stiffness due to the change of the flutter coupling mechanism. For the nonlinear analyses, a larger freeplay angle results in a higher vibration divergent speed. Two different types of limit cycle oscillations and a multiperiodic motion are observed in the wide range of airspeed under the linear flutter boundary. The linear flutter speed shows a slight descend in the thermal environment, but the effect of the temperature on the vibration divergent speed is different under different hinge stiffnesses when there exists freeplay.     

带传动实验机的电磁兼容性分析

本文主要对带传动实验机噪声的产生和传播途径进行了全面的分析，从而为设计、安装、调试和使用带传动实验机提供了技术支持。     

水洞实验图像的一种测量与处理方法

在水洞实验中,由于光线在空气、水和观察窗面板中发生折射,准确实验图像的获取一直是一个难题。本文在大量水洞实验图象测量经验积累的基础上,以水洞模型超空化实验中的超空泡外形测量为例,提出了一种基于计算机图形学的水洞实验图像测量与处理的三步法。该方法不仅可对水洞实验中所拍摄的图像进行修正,消除因不同介质引起的折射误差,而且把图像数据化,可利用计算机对图形自动进行定量处理。经多次应用表明,图像测量与处理的三步法应用方便,具有较高的精度,取得了很好的应用效果。     

求解大型非对称线性方程组的UNSYMMLQ方法

本文给出了求解大型非对称线性方程组的Lanczos方法的一个判据,提出了求解非对称方程组Ax=b的UNSYMMLQ方法,它是Paige和Saunders求解对称线性方程组的SYMMLQ方法的推广。文中描述并讨论了一些数值试验。     

一般线性阻尼系统的预解式以及模态正交性

本文研究一般线性阻尼系统的振动问题。仅假定系统的质量矩阵非奇异,将系统模态的加权正交关系式作了拓广,并利用相互等价的一次本征方程与二次本征方程间的转换关系,简捷地求得了预解式的各种模态展开式。     

涡轮机匣热辐射-对流耦合换热特性数值计算与实验测试

开展了整环机匣的热辐射-对流耦合计算,获得了综合传热系数拟合关系式,并进行了实验测试验证。研究发现：封闭腔内,热辐射的存在大幅强化了壁面换热,辐射热流占总换热量比值可达90%以上。在3层机匣结构中,当发射率在0.3~0.8变化时,机匣沿径向方向上的温度梯度减小,主流区域的对流换热得到加强,半封闭区域对流强度降低。发射率为0.8时,外机匣流体侧壁面的辐射热流占总换热量的33.3%。