Multi-channel discharge characteristics cutting by ultra-fine wire-EDM

Compared with a copper wire electrode, molybdenum wire with a poor conductor is usually used as the electrode in high speed wire-cut electrical discharge machining(HSWEDM), so the resistance of an ultra-fine wire cannot be ignored. To study the differences of discharge characteristics between the ultra-fine wire and the conventional diameter wire, the continuous discharge waveform of two kinds of wire electrodes was compared. It was found that there was a multichannel discharge phenomenon in the...     

Case study of inclined sporadic E layers in the Earth’s ionosphere observed by CHAMP/GPS radio occultations: Coupling between the tilted plasma layers and internal waves

We have used the radio occultation (RO) satellite data CHAMP/GPS (Challenging Minisatellite Payload/Global Positioning System) for studying the ionosphere of the Earth. A method for deriving the parameters of ionospheric structures is based upon an analysis of the RO signal variations in the phase path and intensity. This method allows one to estimate the spatial displacement of a plasma layer with respect to the ray perigee, and to determine the layer inclination and height correction values. In this paper, we focus on the case study of inclined sporadic E (E_s) layers in the high-latitude ionosphere based on available CHAMP RO data. Assuming that the internal gravity waves (IGWs) with the phase-fronts parallel to the ionization layer surfaces are responsible for the tilt angles of sporadic plasma layers, we have developed a new technique for determining the parameters of IGWs linked with the inclined E_s structures. A small-scale internal wave may be modulating initially horizontal E_s layer in height and causing a direction of the plasma density gradient to be rotated and aligned with that of the wave propagation vector k. The results of determination of the intrinsic wave frequency and period, vertical and horizontal wavelengths, intrinsic vertical and horizontal phase speeds, and other characteristics of IGWs under study are presented and discussed.     

Streamwise vortex generation by the rod

The technology development related to aerodynamics is leading to ever increasing loads of wings, airfoils and turbine and compressor blades. The increase in aerodynamic forces is often leading to flow separation and depreciation of the aerodynamic performance of flying objects or propulsion systems. Flow control methods are required to avoid these negative effects. In the recent two decades the flow control by means of air-jet vortex generators has been also intensively investigated. In this method a streamwise vortex is introduced by an oblique jet. The necessity to supply air by a pipe system may be considered a disadvantage. In order to eliminate this feature, it has been proposed to put out a rod instead of a jet. It has been shown that the application of a rod can introduce the same effect as a jet, as long as the streamwise vortex generation is concerned and appropriate dimensions are used. The present paper focuses on the influence of rod vortex generators on a flow pattern downstream. The results presented here concern experimental and numerical investigations and provide guidelines for the design of a new flow control method dedicated mainly to external flows.     

重型燃气轮机高雷诺数CDA叶型转捩特性数值计算

为研究重型燃气轮机的压气机叶片在高雷诺数工况下的气动性能,基于Gamma-Theta转捩模型的雷诺时均方程对某可 控扩散叶型进行了数值计算。通过对比不控制马赫数与控制马赫数,分析高雷诺数对可控扩散叶型气动性能及转捩特性的影响。 结果表明：在不控制马赫数条件下,在零攻角时,雷诺数从7×10 5 增大为9×10 5 ,总压损失增加了约391.95%;在高雷诺数工况下随 着雷诺数的增大,叶片流动损失不断增大,叶片可用攻角范围减小,同时在叶片吸力面出现激波,干扰转捩的产生。在控制马赫数 条件下,当Ma=0.6时,在零攻角工况下,雷诺数从8.2×10 5 增大为1×10 7 ,总压损失减小了约38.98%,吸力面转捩起始点从4.78%弦 长处前移至1.11%弦长处;在高雷诺数工况下,叶片流动损失随着雷诺数的增大不断减小,吸力面转捩位置前移。     

推进剂药浆混合均匀性研究

用Ｈａａｋｅ流变仪研究了高固体含量丁羟推进剂的混合均匀性,提出了用复合粘度和复合模量作混合均匀性表征参数的评价方法。研究结果表明,高固体含量丁羟三组元配方的预混阶段需１５ｍｉｎ～２０ｍｉｎ快速混合,总预混时间以３０ｍｉｎ～３５ｍｉｎ为宜。     

非线性规划的SUMT混合法及其应用

本文提出了非线性规划的内点法与外点法相结合的一种新方法－ＳＵＭＴ混合法,它既兼备内,外点法的功能,又克服了各自单一方法中的缺点。另外,本文还给出无约束问题两种解法的比较及证明,并应用上述方法,利用计算机对精密齿轮按最小转动惯量进行最优设计,取得了令人满意的成果。     

时间发展可压化学反应混合层直接数值模拟

基于一个简化的单步不可逆燃烧动力学模型,对时间发展二维可压化学反应平面混合流场,实现了高精度迎风紧致有限差分直接数值模拟。研究了化学反应放热与流体混合运动间的耦合作用,分析了前者对可压混合层厚度、拟序结构及产物生成率等方面的影响。     

三维不可压边界层抛物化稳定性方程的椭圆特性研究

针对三维平行不可压边界层流动的抛物化稳定性方程,研究其剩余的椭圆特性,提出了消除该特性的具体方法,并对抛物化稳定性方程解与全椭圆问题解的一致性进行了证明。     

极区电离层不均匀结构与增亮极光薄层

磁层亚暴期间随着电子沉降到极区产生极光,一个磁层电场也投射到极区电离层,在电场会聚作用下形成不均匀离子薄层。本文解出稳态动力学平衡E_s层,并把它和反常的极光增亮薄层联系起来,与观测结果比较。      

具有无源控制空腔时正激波/湍流附面层干扰的数值模拟

采用雷诺平均N-S方程和B/L代数湍流模型计算了具有无源控制空腔时正激波/湍流附面层干扰流场。计算与实验结果的比较表明,本文方法可较准确地预测激波结构、激波与附面层干扰区流动基本特征及波后流动分离状态、激波位置、波前马赫数等参数。