Investigations of entrainment characteristics and shear-layer vortices evolution in an axisymmetric rear variable area bypass injector

In this study,firstly,for the axisymmetric RVABI,the change-rule of adverse pressure gradient caused by radial velocity during the transition of internal flow mode in variable geometry is summarized,and a Bypass Ratio(BR) iterative algorithm based on the empirical correlation of non-equilibrium pressure is proposed.The algorithm can estimate the nonlinear relationship between area ratio and BR,with an error range falling below 6.5%.Then,we discuss the favorable effect of uniform mixing on the th...     

结构参数和涵道比对新型漏斗/环形组合式混合扩压器性能影响的数值研究

为了提高航空发动机加力燃烧室总体性能，提出了一种新型漏斗/环形组合式混合扩压器。采用数值模拟方法研究了结构参数和涵道比对该组合式混合扩压器流动和混合性能的影响规律。结构参数包括漏斗高度、进气冲角、进气节角。结果表明：组合式混合扩压器下游呈现剪切与涡流同时存在的流动和掺混特征。漏斗下游会形成一对旋向相反的流向涡对，支板下游形成剪切层。漏斗高度对组合式混合扩压器性能影响较大，其值越大热混合效率越高，同时总压损失也越大。组合式混合扩压器初始热混合效率随着进气冲角和进气节角增大而升高，混合充分发展后热混合效率相差不大，总压损失随着进气冲角的增大而增大，随着进气节角的变化差别不大。热混合效率随着涵道比增大逐渐降低，当涵道比大于0.8时基本保持不变。     

进气道出口截面形式对补燃室掺混性能的影响研究

为研究进气道出口截面形式对补燃室掺混气动特性和燃烧性能的影响，本文对双下侧布局形式的固冲发动机内流场进行数值模拟，对比分析了补燃室相同压比下两种不同进气道出口截面形式在不考虑燃气的混合和反应时掺混段的气动特性和考虑燃气反应时补燃室的燃烧性能。结果表明：两股空气掺混过程中，研究的两种进气道出口截面方案的整体总压损失大致相同，但进气道圆形出口截面的掺混段内流线表现为不稳定的螺旋点形态，相比于方形出口截面的掺混段，其使气流掺混更剧烈，短距离内掺混已经很均匀，且旋流强度小；在考虑燃烧时，进气道圆形出口截面对应的补燃室出口总压恢复系数比方形截面的高约2%，方形进气道出口截面的补燃室出口截面总燃烧效率为95.58%，而圆形截面的达到99.86%。     

Analysis of oil shedding and ligaments formation on bearing rotary elements

For designing efficient lubrication system of an aeroengine bearing chamber, sufficient knowledge on oil/air two-phase flow characteristics is required. When analyzing bearing chamber two-phase flow, the essential prerequisite is quantifying the oil ligaments, which are detached from bearing rotary elements and shed into the bearing chamber. Related investigations are mainly targeted at liquid shedding on the rotating disk as opposed to the bearing rotary elements. Moreover, the research based on bearing rotary elements is conducted by experiment. Due to the limited operating conditions, experimental studies cannot guide engineering applications. To overcome these limitations, a theoretical model is established in this paper, for revealing the mechanism of oil shedding from bearing rotary elements and quantifying the shedding ligaments. The theoretical model is validated against experimental results from classical studies. In addition, the correlation for shedding ligaments number based on aeroengine bearing structural and operational parameters is obtained via theoretical analysis. The analytical results demonstrate that oil shedding and ligaments formation appear at the edge of bearing inner race outer-periphery. The number of shedding ligaments increases with the rise of shaft rotational speed while decreases with the growth of oil viscosity.     

Large eddy simulations of a turbulent mixing layer periodically excited with fundamental and third harmonic frequency

A better understanding of the mixing behavior of excited turbulent mixing layers is critical to a number of aerospace applications. Previous studies of excited turbulent mixing layers focused on single frequency excitation or the excitation with fundamental and its second harmonic frequency. There is a lack of detailed studies on applying low and higher frequency excitation. In this study, we have performed large-eddy simulations of periodically excited turbulent mixing layers. The excitation consists of a fundamental frequency and its third harmonic. We have used phase-averaging to identify the vortex structure and strength in the mixing layer, and we have studied the vortex dynamics. Two different vortex paring mechanisms are observed depending on the phase shift between the two excitation frequencies. The influence of these two mechanisms on the mixing of a passive scalar is also studied. It is found that exciting the mixing layer with these low and high frequencies has initially an adverse influence on the mixing process; however, it improves the mixing further downstream of the splitter plate with the excitation using a phase shift of $\mathrm{\Delta }\varphi =\mathrm{\pi }$ showing the best mixing performance. The present works shed lights on the fundamental vortex dynamics, and has great potential for aeronautical, automotive and combustion engineering applications.     

无塌陷型面出流及输送管内推进剂利用技术研究

针对火箭通用芯级氧箱的共底贮箱结构，通过理论分析及数值仿真，提出了“无塌陷型面+消漩叶片”的出流方案，并通过优化型面起始点半径，确保出流过程中不产生明显的液面塌陷。仿真及缩比试验结果表明，相比传统的“圆盘+倒锥”出流方案，贮箱推进剂在无塌陷型面出流方案下的出流过程中，没有明显的气液掺混或漩涡夹气现象，贮箱内推进剂可得到充分利用。在此基础上，利用Wallis两相漂移模型对输送管内两相介质传播速度进行了理论研究，并结合出流过程中气泡运动速度的试验结果，提出了输送管内推进剂的可用量准则。     

肋参数对液氧甲烷发动机推力室强化换热的影响

为深入研究带肋推力室强化传热的机理，对带肋液氧/甲烷推力室的燃烧与再生冷却进行了流动与传热耦合分析，并针对不同肋高和肋数目进行了参数化分析。结果表明:引入等效平均热流密度的概念可以准确描述带肋推力室中的实际传热过程;平均热流密度总是随着肋数目的增加而减小，当肋高恒定时，由于总换热面积增大，等效平均热流密度会随着肋数目的增加而增大;而当总表面积恒定时，等效平均热流密度会随肋数目的增加而减小。此外，盲目地增大总换热面积并不一定能改善传热强化，甚至会在某些情况下恶化传热，因此在设计过程中也应该结合其他肋参数进行综合考虑。     

低温液体火箭燃烧室内射流雾化研究进展

从理论、实验和数值计算方面，阐述和总结了低温推进剂射流雾化的研究现状和进展。对射流雾化机理及形态进行了分类，重点从对比常温流体与低温流体射流雾化特征参数不同的角度，梳理了射流雾化方面的数值研究方法，并介绍了低温射流雾化的相关实验研究。结果表明:空气扰动破碎机理仍是最广为接受的理论，而超临界工况下射流雾化形态不符合现有的射流雾化分类；数值计算方法逐渐由流体体积法和水平集法向直接数值模拟转变，对闪蒸现象的建模是研究重难点之一；低温流体射流喷雾实验数据匮乏，需通过丰富测量手段，提高测量精度的途径获得完整、准确的实验数据。      

空间激光通信网络中的全光数据合路技术研究

针对空间激光通信网络接入节点多路激光链路传输需求，基于高非线性光纤中四波混频参量效应，并结合色散控制，开展全光合路处理技术研究。采用VPI 10.0模拟平台构建了时间透镜全光合路系统，验证了4路速率为10 Gbps的差分相移键控DPSK（Differential Phase Shift Keying）信号光以及通断键控调制OOK（On-Off Keying）和DPSK混合制式信号光的全光合路可行性，并对全光合路技术实现中色散、光功率等关键参数对系统性能的影响进行了分析，为实际系统的设计和应用提供数据支撑。所提出的全光合路技术具有数据处理带宽大、通信制式兼容且系统复杂度低等优点，可有效降低空间激光通信网络的资源需求与载荷成本，为下一代空间激光骨干网的发展与全面应用提供有效技术支撑。     

燃料预加热对超声速剪切掺混的增强效果

随着高超声速飞行器不断朝着高马赫、宽速域方向发展，推进系统面临低动压的工作条件，对燃烧室内的流动掺混带来巨大挑战。针对碳氢燃料超燃冲压发动机燃烧室，本文研究了碳氢燃料预加热对超声速剪切掺混特性的影响机制，分析了温度与碳氢燃料热裂解对掺混特性的影响规律。研究发现，当碳氢燃料未发生热裂解反应时，燃料预加热会使射流黏性耗散增强从而掺混效率降低，燃料温度从750 K增加到900 K时，燃烧室掺混效率降低约5%、总压损失约增加20%；但燃料热裂解反应对剪切掺混有双重影响，裂解后的碳氢燃料膨胀性能提升，使喷嘴附近的掺混效率提高约18%；由于剪切层内流体湍动能下降，在远离喷嘴的位置掺混效率降低约6%。