Spectroscopy peculiarities of thermal plasma of electric arc discharge between electrodes with Zn admixtures

Plasma of the free burning electric arc between Ag–SnO₂–ZnO composite electrodes as well as brass electrodes were investigated. The plasma temperature distributions were obtained by Boltzmann plot method involving Cu I, Ag I or Zn I spectral line emissions. The electron density distributions were obtained from the width and from absolute intensity of spectral lines. The laser absorption spectroscopy was used for measurement of copper atom concentration in plasma. Plasma equilibrium composition was calculated using two independent groups of experimental values (temperature and copper atom concentration, temperature and electron density). It was found that plasma of the free burning electric arc between brass electrodes is in local thermodynamical equilibrium. The experimental verification of the spectroscopic data of Zn I spectral lines was carried out.     

气动钣金快速成形机的研制

针对电动钣金成形机制造成本高、效率低、易产生死点的问题,提出一种采用气液增力装置代替液压传动系统的气动钣金成形机设计方案。气液增力装置采用精密气压转换阀控制,实现行程平稳控制和加工成形过程平稳加载,显著提高了生产效率;配套研制的多种无齿收缩成形模具,可加工不同形状钣金件并获得更好的表面质量。该技术在钣金快速成形方面的研究处于国内领先水平,已获得3项国家专利。     

磁强计数据辨识卫星自旋状态

针对近地低轨三轴稳定卫星在轨管理后期,除磁强计外其他姿态敏感器都无效情况下的姿态异常问题,分析了三轴稳定卫星失去姿态基准后,星体自旋状态下三轴磁强计测量数据的特点,提出了使用磁强计测量数据的矢量信息,以找到能够获取卫星状态的方法,从而建立了磁强计测量矢量与卫星自旋轴的几何关系,给出了处于自旋状态下的卫星自旋轴确定方法。通过此种辨识方法,获得了某气象卫星姿态异常翻转状态下的自旋矢量方向和自旋角速度,从而证明了该辨识方法快速、有效,可以作为姿态异常卫星自旋状态的辨识手段,为恢复卫星姿态提供了重要信息,具有一定的工程应用价值。     

智能数控机床及其技术体系框架

首先简要介绍了数控机床的发展趋势,其次结合当前学术界及工业界的实践,对智能机床的概念进行了定义,然后提出了智能机床的技术体系框架,并详细阐述了智能数控系统、智能元器件以及智能化应用技术等智能机床中的关键技术.     

一种兼容GPS和BD系统的跟踪环路相干积分方法

在城市、峡谷等复杂环境下,卫星导航信号衰减严重,接收机导航定位性能变差,甚至不能工作,给国民生产生活带来诸多不便.提高接收机弱信号的跟踪能力,研究高性能的卫星导航接收机具有重要的意义和价值.在研究分析GPS、北斗D1导航电文的调制方式和相干积分方法的基础上,构建了一种改进直方图的位同步方法,该方法借鉴直方图的思想,通过设定比特跳变的统计门限上限和多组门限下限找到比特跳变边沿.在此基础上设计实现了一种长时间相干积分方法,该方法兼容GPS电文和北斗D1导航电文,可以有效地消除导航电文跳变或者NH码跳变带来的比特翻转.最后,在FPGA平台验证了该方法可以有效提高信号信噪比,以及接收机在弱信号环境下的跟踪能力.     

涡轮导向器排气面积测量与分析

针对航空发动机涡轮导向器喉道面积科研生产的需求,研究发动机涡轮导向器喉道面积测量方法,解决发动机涡轮导向器喉道面积测量技术问题,满足发动机型号计量的需求,为航空发动机研制提供有力的保障.     

Simultaneous state and actuator fault estimation for satellite attitude control systems

In this paper, a new nonlinear augmented observer is proposed and applied to satellite attitude control systems. The observer can estimate system state and actuator fault simultaneously. It can enhance the performances of rapidly-varying faults estimation. Only original system matrices are adopted in the parameter design. The considered faults can be unbounded, and the proposed augmented observer can estimate a large class of faults. Systems without disturbances and the fault whose finite times derivatives are zero piecewise are initially considered, followed by a discussion of a general situation where the system is subject to disturbances and the finite times derivatives of the faults are not null but bounded. For the considered nonlinear system, convergence conditions of the observer are provided and the stability analysis is performed using Lyapunov direct method. Then a feasible algorithm is explored to compute the observer parameters using linear matrix inequalities (LMIs). Finally, the effectiveness of the proposed approach is illustrated by considering an example of a closed-loop satellite attitude control system. The simulation results show satisfactory perfor-mance in estimating states and actuator faults. It also shows that multiple faults can be estimated successfully.     

基于被动探测的目标磁扰动信号检测与定位

针对目标探测定位的快速发展中,军事领域主动雷达存在的缺陷和实现具有高度隐蔽性的目标检测技术的需求,提出一种基于被动磁矢量测量的目标扰动信号检测与定位技术.该方法利用磁传感器阵列测量目标产生的磁矢量扰动信息,通过滤波、门限检测、基函数展开等技术将有效扰动从复杂的背景场中提取出来,并结合速度估计、磁梯度张量矩阵算法研究任意...     

基于位移和力值组合的静重式力标准机砝码加卸载控制方法研究

介绍了一种基于位移和力值组合的静重式力标准机砝码加卸载的控制方法,通过监测砝码的移动量和参考力传感器叠加系统的力值量,实时调整加卸载机构的加卸载速度,以实现对被检力传感器的平滑加卸载的目的。该方法有效解决了吊挂在加载过程中产生较大摆动,影响力标准机复现力值准确度的问题,同时也消除了力值过冲现象,避免了因逆程效应而导致的力传感器输出偏差。     

基于自适应容积粒子滤波的车辆状态估计

针对车辆状态估计中由模型的强非线性、噪声的非高斯分布等相关因素导致估计精度下降甚至发散的问题,本文提出了基于自适应容积粒子滤波(Adaptive cubature particle filter,ACPF)的车辆状态估计器。首先基于非稳态动态轮胎模型,构建高维度非线性八自由度车辆模型。其次利用自适应容积卡尔曼滤波(Adaptive cubature Kalman filter,ACKF)算法更新基本粒子滤波(Particle filter,PF)算法的重要性密度函数,以完成自适应容积粒子滤波算法设计。利用车载传感器信息,运用ACPF算法实现对车辆的侧倾角、质心侧偏角等关键状态变量高精度在线观测。搭建Simulink-Carsim联合仿真平台进行了算法的验证,结果表明该算法状态估计精度高于传统无迹粒子滤波(Unscented particle filter,UPF)算法,且算法运算效率高于UPF算法,而传统PF估计值发散。研究结果为实现车辆动力学精准控制提供了理论支持。