部分破坏拆卸模式下拆卸规划

为了对产品进行拆卸规划,基于装配有向图提出一种部分破坏性模式下的拆卸规划方法。通过装配有向图表达产品零部件间的装配关系,并在此基础上构建装配关系矩阵、装配连接矩阵和可达矩阵。由矩阵遍历和运算获得产品装配结构、装配深度等信息,并根据这些信息确定被破坏对象,最终完成部分破坏性拆卸模式下拆卸规划过程。将上述理论应用于摩擦驱动装置拆卸规划中,其结果验证了理论分析的有效性和正确性。     

Roadmap to a human Mars mission

We propose a new roadmap for the preparation of the first human mission to Mars. This proposal is based on the work of ISECG and several recent recommendations on human Mars mission architectures. A table is proposed to compare the possible benefits of different preparatory missions. Particular attention is paid to the possibility of qualifying important systems thanks to a heavy Mars sample return mission. It is shown that this mission is mandatory for the qualification of Mars aerocapture at scale-1, EDL systems at scale 1 and Mars ascent. Moreover, it is a good opportunity to test many other systems, such as the heavy launcher and the transportation systems for the trips beyond LEO. These tests were not mentioned in the last ISECG report. This strategy is facilitated in the case of the simplified Mars mission scenarios that have recently been presented because it is suggested that relatively small vehicles with small crew sizes are used in order to optimize the payload mass fraction of the landing vehicles and to avoid the LEO assembly. An important finding of the study is that a human mission to the surface of the Moon is not required for the qualification of the systems of a human mission to Mars. Since affordability is a key criterion, two important missions are proposed in the roadmap. The first is a heavy Mars sample return mission and the second is a manned mission to a high Earth orbit or eventually to the vicinity of the Moon. It is shown that both missions are complementary and sufficient to qualify all the critical systems of the Mars mission.     

不同作战任务条件下的UCAV航路规划问题建模

UCAV航路规划是充分发挥UCAV作战优势、使任务复杂性与UCAV能力之间保持良好协调性所必须解决的关键问题。在分析UCAV航路规划技术的基本概念和基本要求的基础上,针对不同作战任务条件下的UCAV航路规划问题进行了建模研究,分别建立了单UCAV航路规划、单UCAV多航路规划以及多UCAV协同航路规划等数学模型。     

ERP 系统中 BOM 的模型分析与算法实现

BOM 是 ERP 的核心模块,其数据结构与算法直接影响到了系统使用效率,本文通过对 BOM 标模型的分析,提出了递归展 BOM 和双向链表展 BOM 两种算法的具体实现     

冗余空间机械臂粗捕获段无碰撞轨迹规划算法

现有的基于C空间的无碰撞轨迹规划算法需要求解C空间以获得C空间障碍边界。对于多自由度的冗余机械臂,求解过程需要消耗很大的计算量和内存,不适用于计算资源紧张的空间机械臂轨迹的快速规划。文章提出了一种不需要求解C空间的试探性规划算法,包含4个子算法：碰撞检测算法、无碰撞目标构型求解算法、无碰撞路径搜索算法和路径平滑算法。已知期望的末端作用器位置和姿态,利用目标构型求解算法得到无碰撞的目标构型,然后由路径搜索算法在C空间障碍边界未知的情况下,利用碰撞检测算法,采用一定的试探规律,在C空间中搜索出一条无碰撞路径,最终由路径平滑算法使该路径平滑,易于实现。仿真算例表明,该算法是快速有效的,适用于冗余空间机械臂粗捕获段的快速轨迹规划。     

Comparison of Antarctic riometer radio wave absorption and THEMIS mission energetic electron fluxes

Simultaneous observations of in situ plasma properties in the tail of the Earth’s magnetosphere and of ground based instruments, lying on the same geomagnetic field lines, have recently proved to yield significant new results. In most cases magnetosphere ionosphere interactions during the night-time northern hemisphere conditions are studied. Here, observations of energetic electrons in the tail of the Earth’s magnetosphere made by the THEMIS mission satellites are compared with auroral radio wave absorption determined by riometers in the Antarctic for sunlit conditions. Days for which satellites and riometers are connected by the same geomagnetic field line are selected using a geomagnetic field model. The six days analysed show clear associations between fluxes and absorptions in some cases. However, these do not necessarily correspond to conjugacy intervals. Hours of positive associations are 1.65 times those for negative associations, all hours and days considered (1.42–3.6 on five days and 0.58 on the other day). These computations are assumed appropriate since the footprints of the satellites used approximately follow corrected geomagnetic parallels for all six days studied. The use of a finer parameterization of geomagnetic models to determine conjugacy may be needed.     

航天器近距离导引轨迹规划仿真系统设计

以航天器近距离导引轨迹规划仿真验证为目标,对基于Visual C+ +,Vega Prime和Matlab的联合仿真系统进行开发研究.首先,建立了数学模型.然后,利用Matlab对所建立的数学模型进行优化求解,得到追踪航天器近距离机动时的位置、速度等信息.并通过Multigen Creator软件建立卫星等对象的模型,使用Vega Prime进行视景仿真.之后,采用Visual C+ +进行系统集成,建立基于三者相结合的仿真验证系统.最后,以椭圆参考轨道下近距离交会的连续推力式燃料最优轨迹规划为例,验证了该联合仿真系统.     

“伽利略”卫星在轨任务控制系统高级规范综述

重点描述了＂伽利略＂卫星在轨任务控制系统高级规范的相关内容,其中包括系统规范和子系统规范,如系统监测和控制子系统、遥测监测子系统、遥控指令子系统和数据归档子系统等;就如何借鉴＂伽利略＂卫星在轨任务控制系统高级规范,提出了一些开展我国星座卫星在轨任务控制系统设计的策略和方法,如设计方法、实现途径、自动化和安全策略等。     

基于粒子群优化算法的月面巡视器全局路径规划

在月面巡视器遥操作系统中,路径规划分为任务级路径规划、全局路径规划和局部路径规划。根据巡视器全局路径规划的应用要求,引入粒子群优化算法应用于全局导航点的规划。针对粒子群算法在路径规划中容易造成不收敛或病态收敛的问题,对算法进行了修改,去掉了速度更新中的速度惯性因子,只保留自身认识因子和社会认识因子,使其在全局路径规划中能够快速收敛;同时引入经典遗传算法中的变异因子以增强算法的全局优化能力。仿真结果表明该算法具有计算简单、全局寻优能力强等特点,能够快速地找到优化的全局导航点。同时在不同的模拟月面地形上进行仿真试验,针对存在的问题提出了对应的二次优化方法,结果表明该方法较好地满足了巡视器全局路径规划的应用需求。     

串并混联空间机械臂全自由度轨迹规划算法

目前,国内外对串并混联空间机械臂的研究较少;而且大多在舍弃冗余自由度的情况下进行轨迹规划.针对7自由度串并混联空间机械臂,提出了一种基于解析解、并且充分放开全部7个自由度的机械臂轨迹规划算法.该规划算法既扩大了串并混联空间机械臂的规划可达空间,又保证了规划的实时性,同时还保留了结构承载能力强的优点,可以充分发挥其作为空间抓捕用臂的优势.通过仿真和地面空间操作抓捕试验,验证了算法的有效性.