面向时序InSAR的卫星任务规划框架设计

随着国内自主雷达卫星和差分干涉合成孔径雷达技术(D-InSAR)及衍生的时序InSAR技术的发展,以时间序列上重复观测为主的长周期形变监测的应用与日俱增。对遥感卫星地面任务规划系统来说,规划和管理大量有时序关联的重复任务,从而最大限度地满足观测要求,是提升以形变监测为使命的雷达卫星运控效率的关键。在综合考虑雷达差分干涉任务序列性、一致性、周期性特征的基础上,设计了一种面向雷达卫星时序InSAR类型任务的规划框架,旨在规划序列任务时,考虑序列整体特性,进行序列任务组间的冲突检测。基于此方法,对现有的地面任务规划系统进行了优化升级,验证了框架的有效性。结果证明:该方法可快速、自动进行序列任务冲突消解,可为长周期序列任务的规划和管理提供设计参考。     

面向月球科研站任务的地月准实时遥操作模拟验证系统设计与关键技术研究

针对月球科研站任务地月遥操作需求和特点,设计地月准实时遥操作模拟验证系统,对其中的关键技术海量多尺度遥感数据环境感知、空地协同高精度定位、基于混合现实的预测仿真等进行了研究。提出了基于海量多尺度遥感数据的联合处理方法,环境感知数据融合可处理米级至厘米级环境感知结果;设计基于空地多运动平台协同定位的原型软件,空地协同地标约束下,定位精度不低于轨道器影像1个像素;开发了带有力觉反馈的预测仿真验证平台,在2~3 s变时延约束下可在仿真环境下协同演示遥操作过程,真实还原从端的遥操作作业场景,提高遥操作的执行效率和安全性。为地面人员的方案设计、操作手训练、故障处置等提供实时支持,为我国未来实施月球科研站任务筑牢基础。     

Air route network optimization in fragmented airspace based on cellular automata

Air route network optimization,one of the essential parts of the airspace planning,is an effective way to optimize airspace resources,increase airspace capacity,and alleviate air traffic con gestion.However,little has been done on the optimization of air route network in the fragmented airspace caused by prohibited,restricted,and dangerous areas (PRDs).In this paper,an air route network optimization model is developed with the total operational cost as the objective function while airspace restriction,air route network capacity,and non-straight-line factors (NSLF) are taken as major constraints.A square grid cellular space,Moore neighbors,a fixed boundary,together with a set of rules for solving the route network optimization model are designed based on cellular automata.The empirical traffic of airports with the largest traffic volume in each of the 9 flight information regions in mainland China is collected as the origin-destination (OD) air port pair demands.Based on traffic patterns,the model generates 35 air routes which successfully avoids 144 PRDs.Compared with the current air route network structure,the number of nodes decreases by 41.67％,while the total length of flight segments and air routes drop by 32.03％ and 5.82％ respectively.The NSLF decreases by 5.82％ with changes in the total length of the air route network.More importantly,the total operational cost of the whole network decreases by 6.22％.The computational results show the potential benefits of the model and the advantage of the algorithm.Optimization of air route network can significantly reduce operational cost while ensuring operation safety.     

基于DDPG-PID的机器人动态目标跟踪与避障控制研究

针对机器人在动态复杂环境下的操作问题,研究机械臂跟踪运动目标及避障的运动控制方法。采用传统PID控制方法与DDPG强化学习算法相结合的方式,利用PID控制使得机械臂的工作平面快速接近目标物并与之重合,再使用DDPG算法让机械臂在平面内自主学习追踪目标物投影同时避开障碍物投影,最终在三维空间中实现跟踪与避障。该方法将机械臂作为一个智能体,智能体通过感知目标物和障碍物的距离偏差来自主学习避障跟踪策略。将本方法用于多自由度机械臂路径规划与避障任务中,对比单纯使用DDPG算法将机械臂作为智能体在空间中进行决策控制,仿真结果显示本文所提出的方法收敛效果和控制性能更好,机械臂能在训练后实现目标物的稳定跟踪和障碍物的躲避。     

基于速度增量的空间绳系机器人中距离逼近过程最优轨迹规划

针对空间绳系机器人中距离逼近过程最优轨迹规划问题,提出了基于速度增量的多目标逼近轨迹优化方法,优化指标为总速度增量及逼近时间。首先建立逼近过程相对动力学模型及最优逼近轨迹优化模型,然后利用改进型非劣分类遗传算法得到相对逼近距离1.5 km内逼近轨迹的Pareto最优解。仿真结果表明,该方法可以揭示空间绳系机器人逼近距离1.5 km内逼近时间、燃料消耗、相对目标的面内视界角及速度增量次数之间的相互关系,能满足针对不同任务需求提供相应最优轨迹的要求。     

Modeling and experimental validation of sawing based lander anchoring and sampling methods for asteroid exploration

This paper presents a novel lander anchoring system based on sawing method for asteroid exploration. The system is composed of three robotic arms, three cutting discs, and a control system. The discs mounted at the end of the arms are able to penetrate into the rock surface of asteroids. After the discs cut into the rock surface, the self-locking function of the arms provides forces to fix the lander on the surface. Modeling, trajectory planning, simulations, mechanism design, and prototype fabrication of the anchoring system are discussed, respectively. The performances of the system are tested on different kinds of rocks, at different sawing angles, locations, and speeds. Results show that the system can cut 15?mm deep into granite rock in 180?s at sawing angle of 60°, with the average power of 58.41?W, and the “weight on bit” (WOB) of 8.637?N. The 7.8?kg anchoring system is capable of providing omni-directional anchoring forces, at least 225?N normal and 157?N tangent to the surface of the rock. The system has the advantages of low-weight, low energy consumption and balance forces, high anchoring efficiency and reliability, and could enable the lander to move and sample or assist astronauts and robots in walking and sampling on asteroids.     

自动铺丝最小间隙路径规划与复合材料锥壳结构制造

自动铺丝技术（AFP）是提高复合材料构件制造效率和降低其制造成本的关键技术和重要手段。铺放轨迹的设计是控制自动铺丝工艺质量的关键。对于复杂的结构形式,合理的铺丝路径对保证可制造性及铺贴质量至关重要。本文针对简化后的后机身锥壳特征结构,研究了基于固定角法、测地线法和变角度法的自动铺丝轨迹算法设计,解决了铺放复杂曲面满覆盖问题;总结对比获得了不同铺丝轨迹方法的特点和适用范围。以保证工艺性并满足结构设计铺层方向为原则,选用了带宽为6.35 mm的自动铺丝预浸料完成工艺验证件制造,并通过有限元分析评估了自动铺丝轨迹算法的合理性。结果表明：该结构宜采用测地线法铺放0°方向铺层以减少褶皱;采用固定角法铺放90°方向铺层能够保证连续铺放;采用结合预浸窄带侧弯试验结果的变角度轨迹规划方法铺放此锥类构件±45°方向铺层能够保持最小间隙。铺丝间隙使锥壳结构单层等效模量下降约30%,整体强度下降约10%。因而在结构优化设计时需考虑自动铺丝工艺对安全裕度影响的因素。     

一种快速响应型小卫星的自主任务规划设计与应用

浦江一号卫星是由上海航天技术研究院研制的一颗快速响应型小卫星,于2015年9月成功发射,卫星质量347 kg,运行在高度481 km的太阳同步轨道.为高效、高精度识别定位地面大范围广泛而随机分布的电磁辐射目标,浦江一号卫星提出了基于单星电磁信号监测载荷与光学成像载荷综合应用的在轨自主任务规划方案.在轨应用表明:该设计解...     

Roadmap to a human Mars mission

We propose a new roadmap for the preparation of the first human mission to Mars. This proposal is based on the work of ISECG and several recent recommendations on human Mars mission architectures. A table is proposed to compare the possible benefits of different preparatory missions. Particular attention is paid to the possibility of qualifying important systems thanks to a heavy Mars sample return mission. It is shown that this mission is mandatory for the qualification of Mars aerocapture at scale-1, EDL systems at scale 1 and Mars ascent. Moreover, it is a good opportunity to test many other systems, such as the heavy launcher and the transportation systems for the trips beyond LEO. These tests were not mentioned in the last ISECG report. This strategy is facilitated in the case of the simplified Mars mission scenarios that have recently been presented because it is suggested that relatively small vehicles with small crew sizes are used in order to optimize the payload mass fraction of the landing vehicles and to avoid the LEO assembly. An important finding of the study is that a human mission to the surface of the Moon is not required for the qualification of the systems of a human mission to Mars. Since affordability is a key criterion, two important missions are proposed in the roadmap. The first is a heavy Mars sample return mission and the second is a manned mission to a high Earth orbit or eventually to the vicinity of the Moon. It is shown that both missions are complementary and sufficient to qualify all the critical systems of the Mars mission.     

智能化战术任务管理系统研究

从感知、评价、决策的认知过程研究了现代军机战术任务管理系统的结构、组成和功能,重点研究了态势评估和任务规划两个关键子系统.建立了基于贝叶斯网络和模糊逻辑推理的态势评估算法及威胁评估模型,采用贝叶斯网络对威胁级别进行了评估,运用模糊逻辑对各威胁源的相对重要性进行了推理,实现了对威胁源威胁级别和相对重要性的连续动态评估.研究了基于动态A^*算法的战术飞机飞行路径在线实时规划问题,实现了态势评估与路径规划两子系统之间的集成.研究结果表明了该系统方案和算法的有效性,任务规划系统能够自适应战场态势的变化.