Supersonic Two-Dimensional Minimum Length Nozzle Design at High Temperature. Application for Air

When the stagnation temperature of a perfect gas increases, the specific heat ratio does not remain constant any more, and start to vary with this temperature. The gas remains perfect, its state equation remains always valid, except it will name in more calorically im-perfect gas or gas at High Temperature. The goal of this work is to trace the profiles of the supersonic Minimum Length Nozzle with centered expansion when the stagnation temperature is taken into account, lower than the threshold of dissociation of the molecules and to have for each exit Mach number several nozzles shapes by changing the value of the temperature. The method of characteristics is used with a new form of the Prandtl Meyer function at high temperature. The resolution of the obtained equations is done by the second order of finite differences method by using the predictor corrector algorithm. A study on the error given by the perfect gas model com-pared to our model is presented. The comparison is made with a calorically perfect gas for goal to give a limit of application of this model. The application is for the air.     

Integrated Entry Guidance for Reusable Launch Vehicle

A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method.     

成败型与指数型单元混合系统的可靠性熵法评定

利用信息量等效的基本原则, 研究了成败型单元与指数型单元混合组成系统的可靠性评定问题.给出了成败型单元与指数型单元混合组成成败型系统或指数型系统时, 单元试验信息熵法折合的基本模型, 导出了成败型信息与指数型信息相互折合的基本公式, 并通过算例及其评定结果的分析比较说明了方法的具体应用及其有效性.      

新一代运载火箭动力系统试车总体试验技术研究

针对动力系统试验规模大、风险高、密度高、并行环节多、技术难度大等突出特点,试验主体承担单位细化落实试验主体抓总责任,充分发挥抓总、策划、牵引能力,注重工艺流程的持续优化、加强试验过程的统筹协调、安全防范和风险管控,统一指挥十余个参试系统,统领近十个参试单位形成的试验队有序工作,技术状态控制有效,确保了三型运载火箭八个模块十二次动力系统试车准时准点和圆满成功,为三型运载火箭按期首飞奠定了基础。     

面向航天器系统级测试的虚拟测试方法及应用

航天器总体设计正确性和接口实现正确性的及时验证,是提高航天器这类复杂系统可靠性的重要手段。本文提出一种基于模型检测的虚拟测试方法。方法采用窗口树模型(WTM)对复杂系统进行建模,采用状态转移图(STG)作为系统规约刻画系统行为的正确性。方法通过提出基于自动机的模型检测机制,实现了一种面向航天器系统级测试的虚拟测试平台(VTP)原型系统。该平台支持虚拟测试准备、虚拟测试执行和虚拟测试评估等功能,模拟并实现复杂系统总体设计正确性的验证和接口实现正确性的验证。     

基于模型的矢量喷管控制系统设计

为实现矢量喷管控制系统正向研发"V"字模型,使用基于模型的设计方法开展矢量喷管控制系统的设计和验证。建立了包含矢量喷管液压机械单元、矢量喷管控制器及矢量偏转运动的矢量喷管控制系统模型,与发动机模型、飞机模型集成用于矢量喷管控制系统的系统综合设计。使用模型自动测试技术开展数字仿真试验,利用自动代码生成技术和实时仿真技术实现控制软件快速开发和系统半物理试验,试验结果表明了矢量喷管控制系统设计的正确性、高效性。     

Investigation of MHD power generation with supersonic non-equilibrium RF discharge

Magnetohydrodynamic (MHD) power generation with supersonic non-equilibrium plasma is demonstrated. Capacitively coupled radio frequency (RF) discharge (6 MHz, maximum continual power output of 200 W) was adopted to ionize the Mach number 3.5 (650 m/s), 0.023 kg/m3 airflow. In a MHD channel of 16 mm × 10 mm × 20 mm, MHD open voltage of 10 V is realized in the magnetic field of 1.25 T, and power of 0.12 mW is extracted steadily and con-tinuously in the magnetic field of 1 T. The reasons for limited power generation are proposed as:low conductivity of RF discharge; large touch resistance between MHD electrode and plasma;strong current eddies due to flow boundary layer. In addition, the cathode voltage fall is too low to have obvious effects on MHD power generation.     

Performance of the IRI-2007 model for equatorial topside ion density in the African sector for low and extremely low solar activity

The recent availability of new data sets during the recent extreme solar minimum provides an opportunity for testing the performance of the International Reference Ionosphere in historically undersampled regions. This study presents averages and variability of topside ionospheric densities over Africa as a function of season, local time, altitude, and magnetic dip latitude as measured by the Communication/Navigation Outage Forecast System (C/NOFS) satellite. The results are compared to the three topside model options available in IRI-2007. Overall, the NeQuick model is found to have the best performance, though during the deepest part of the solar minimum all three options significantly overestimate density.     

考虑目标安全性的最优协同拦截制导律研究

针对目标和其发射的拦截弹对来袭攻击弹进行协同拦截问题,设计了一种最优协同拦截制导律。建立描述目标、攻击弹和拦截弹三者相对运动关系的模型,引入零控脱靶量对模型进行降阶处理。考虑拦截弹对攻击弹的拦截精度、拦截末端时目标的安全性以及目标、拦截弹的控制能量问题,基于攻击弹-拦截弹零控脱靶量、攻击弹-拦截弹终端横向相对运动速度零控脱靶量、目标-攻击弹零控脱靶量以及目标和拦截弹的加速度,建立了性能指标函数,同时考虑目标和拦截弹加速度的有限性,基于极小值原理设计了最优协同拦截制导律。仿真结果表明,相比目标和拦截弹独立飞行的情况,采用协同拦截制导律,在考虑了目标安全性的前提下,机动性较弱的拦截弹能够以较平直的弹道成功拦截攻击弹。     

基于熵产最小曲线型散热器参数优化设计及数值模拟

基于参数化设计和模拟方法,采用VB开发了放射状散热器参数化设计模拟软件,可自动生成高质量的六面体网格和进行数值计算.利用该软件快速对风扇散热器组件的结构参数进行性能分析和讨论,加深了对风扇散热器组件各主要参数在散热器整体性能中影响程度的认识.采用并行计算流体力学方法,基于组合优化策略以熵产最小为目标函数对多参数结构风扇散热器组件进行优化,曲线型散热器优化结果比初步设计方案的性能提高了7％.