基于非抽取小波包变换的信号滤波算法

对航天测控信号进行滤波处理,有利于改善信号品质,提高系统的测量性能。针对航天测控信号中的差分单程测距(DifferentialOne-wayRanging, DOR)信标信号等侧音信号,提出了基于非抽取小波包变换（Un-decimatedWaveletPacketTransform,UWPT）的滤波改进算法。该算法以功率平坦度为准则,判断某一节点是否需要继续分解。改进算法克服了以能量聚焦度为准则时算法误判停止分解或多重分解算法复杂、计算量大等的缺点,同时解决了阈值不易确定的问题。仿真结果表明改进算法在降低算法复杂度的同时,滤波性能相对有所提高。最后采用改进算法对仿真信号和在轨卫星数据进行处理,结果表明滤波后仿真信号差分相位估计精度提高约3倍、实测数据差分相位估计精度提高0.72倍。     

Theoretical and Experimental Investigation of Laser Milling Assisted with Jet Electrochemical Machining

In laser milling assisted with jet electrochemical machining （LMAJECM）, the source of energy is a pulsed laser beam aligned coaxially with a jet of electrolyte, which focuses optical energy on the surface of work- piece. The impact of jet of electrolyte develops a state-of-art work to perform operations such as electrolytic etch- ing, effective cooling, and transportation of debris. Therefore, a special jet cell is designed to obtain stable jet as to be a kind of noneontact tool, i. e. , electrode. According to the theoretical model of on-off pulse time process, laser machining and electrolytic anodization are simulated by finite element analysis （FEA） method. Grooves on a 0.5 mm thick 321 stainless steel sheet produced by LMAJECM is performed with pulsed Nd：YAG laser at the second harmonic wavelength. Compared with laser milling under ambient atmosphere conditions, the recast layer and burrs are effectively diminished. And the accuracy of depth is dedicated to laser milling, whilst that of width is dominated by jet electrochemical machining. It is demonstrated that LMAJECM can be a highly potential approach for fabricating 3-D micro components.     

Optical orbital debris spotter

The number of man-made debris objects orbiting the Earth, or orbital debris, is alarmingly increasing, resulting in the increased probability of degradation, damage, or destruction of operating spacecraft. In part, small objects (<10 cm) in Low Earth Orbit (LEO) are of concern because they are abundant and difficult to track or even to detect on a routine basis. Due to the increasing debris population it is reasonable to assume that improved capabilities for on-orbit damage attribution, in addition to increased capabilities to detect and track small objects are needed. Here we present a sensor concept to detect small debris with sizes between approximately 1.0 and 0.01 cm in the vicinity of a host spacecraft for near real time damage attribution and characterization of dense debris fields and potentially to provide additional data to existing debris models.     

火星精确着陆制导问题分析与展望

美国火星科学实验室(MSL)任务成功将“好奇”号火星车着陆到火星表面,开创了火星精确着陆探测的新局面。以MSL着陆任务为典型代表,分析了目前火星着陆探测进入、下降和着陆（Entry, Descent and Landing, EDL）过程的制导方案及制导系统的发展趋势。以在火星高海拔、复杂地形区域定点着陆为潜在工程目标,归纳了火星EDL过程面临的制导主要问题。根据未来制导系统自主性和自适应性的技术需求及潜在工程任务制导面临的问题,提出了火星EDL制导方面需要解决的关键技术,并对其在未来工程中的应用潜力进行了展望。     

航天器资源约束的时间拓扑排序处理方法

针对航天器自主任务规划中的资源受限、约束复杂、活动并行等问题,提出了基于时间拓扑排序的航天器资源计算方法。考虑规划结果中资源产生及消耗,采用资源约束网络模型表示规划中动作的资源需求。通过分析资源变化与动作执行时间的关系,在资源处理过程中对资源约束网络的资源突变时刻进行拓扑排序,优化了流量推进路径的选择过程,时间复杂度为O(n 2 )。数值仿真结果表明,算法提高了规划过程中资源处理的效率。     

A six-degree-of-freedom hardware-in-the-loop simulator for small spacecraft

This paper presents a novel six degree of freedom, ground-based experimental testbed, designed for testing new guidance, navigation, and control algorithms for the relative motion of nano-satellites. The development of innovative guidance, navigation and control methodologies is a necessary step in the advance of autonomous spacecraft. The testbed allows for testing these algorithms in a one-g laboratory environment. The system stands out among the existing experimental platforms because all degrees of freedom of motion are controlled via real thrusters, as it would occur on orbit, with no use of simulated dynamics and servo actuators. The hardware and software components of the testbed are detailed in the paper, as is the motion tracking system used to perform its navigation. A Lyapunov-based strategy for closed loop control is used in hardware-in-the loop experiments to successfully demonstrate the full six-degree-of-freedom system׳s capabilities. In particular, the test case shows a two-phase regulation experiment, commanding both position and attitude to reach specified final state vectors.     

基于属性散射中心模型的SAR超分辨成像算法

基于属性散射中心模型,提出一种稳健而快速的SAR超分辨成像算法,在超分辨的同时能够考虑到目标的整体结构。首先利用改进的正交匹配追踪算法（OMP）对简化的属性散射中心模型进行参数估计,然后基于估计的模型参数在信号重构时进行二维频谱外推实现SAR超分辨成像。该算法具有较高的运算效率,相对于传统基于点散射模型超分辨算法,能够有效解决部件不连续的问题,并且初始指向角的利用可以取得良好的聚焦效果。仿真实验验证了该算法的优越性。     

导航星座星间链路信号捕获搜索策略研究

针对导航星座星间链路信号动态范围大、捕获性能要求高之间的矛盾,利用星历信息辅助信号捕获。在此基础上,分析了信号捕获串行搜索、码并行搜索和频率并行搜索的计算代价,给出了不同信号体制和星历误差下各搜索策略对应的运算量表达式,并结合典型的应用场景进行了算例分析。分析结果表明星间信号捕获在星历误差较小时采用串行搜索策略具有最少的计算量,在星历误差较大时采用码并行搜索策略计算量最少。     

基于北斗的机载终端完好性算法仿真研究

国内外关于接收机自主完好性算法的理论研究已经成熟,但缺乏依据北斗实测数据的算法性能分析。根据北斗Ⅱ代卫星导航系统14颗星的星座状态及其公开的服务性能,结合民航非精密进近的应用需求,对机载端嵌入自主完好性算法进行仿真研究。首先通过理论仿真,分析了亚太区之内算法的可用性。其次,利用NovAtel接收机实测的北斗数据,设定不同的场景和故障类型,对算法故障检测和识别的性能进行了研究分析。通过仿真,北斗系统在亚太区之内的平均可见星个数大于7颗,平均水平保护限值小于500m,能够满足算法的要求。另通过实测研究,算法可以有效地检测并识别出异常的伪距误差（即故障卫星）。结果表明：接收机自主完好性算法适用于当前北斗Ⅱ代卫星导航系统,能够为民用航空非精密进近提供具备完好性保证的服务。     

关于航天器产品研制试验的思考

研制试验是航天器产品3大类试验之一,是提高产品固有可靠性的重要手段。随着对航天器产品在轨可靠、稳定运行要求的不断提升,研制试验的重要性进一步凸显。但是由于认识上的不足,使得研制试验在实际执行过程中存在一些偏差。文章结合航天器产品研制试验的现状和需求,对与研制试验相关的几个概念进行解读,对研制试验存在的问题进行分析,并利用典型案例说明研制试验在提高产品固有可靠性方面的独特作用,以期为正确认识航天器产品研制试验,并合理策划、有效开展研制试验提供借鉴。