Space traffic control: a view of the future

This paper provides an overview of a system for providing reliable, ongoing, timely situational awareness services to satellite operators. Such services would include close approach warnings, warnings of potential radio frequency interference, and other offerings designed to help make operators aware of possible threats to the safe operation of their spacecraft and measures they can take to lessen these threats. The paper discusses current trends, proposes operational requirements, and speculates on the type of organization that may emerge to provide space traffic control services. It highlights how the detailed information required for such services may affect the evolution of the use of space.     

智能控制大功率氨压机制冷系统

本文将模糊控制、神经元控制等智能控制技术成功地应用于大型活塞式氨压机制冷系统，实现了恒转矩负载的变频调速节能。实际运行结果证明，该智能控制的大功率氨压机制冷系统工作稳定、控制精度高、节能效果显著，具有很好的经济效益及推广应用价值。     

直升机疲劳和静力试验伺服控制系统的研究

本文主要详细的介绍了用于直升机动部件结构的疲劳和静力试验中全数字式的多通道伺服控制系统的总体设计及各功能模块的划分。     

Spacecraft optimal rendezvous controller design using simulated annealing

A new global approach for rendezvous Linear Quadratic controller design is presented in this paper. Instead of solving the algebraic Riccati equation, a continuous simulated annealing (SA) algorithm is used to design rendezvous LQ controller. Optimization of one automatic rendezvous controller with 18 design parameters is illustrated. The results show that the SA algorithm can locate the global solution effectively and robust, besides a great number of global solutions have been obtained by the SA. The SA has demonstrated better performance than other optimization algorithms such as floating-coded Genetic Algorithm, Simplex method and Powell algorithm.     

光学太阳反射器的性能评价试验规范

航天器在地面待发射期间和空间实际飞行过程中，热控元件光学太阳反射器要遇到各种地面和空间环境，为了航天器的可靠和长寿命，必须对所制备的ＯＳＲ涂层进行各种地面和空间环境试验并对其各项性能检验与考核，该文就这一系列试验的目的和规范进行了讨论。     

比例式变推力固体姿控发动机非稳态特性研究

为了研究比例式变推力固体姿控发动机的内流场非稳态特性,建立了比例针栓推力器的二维轴对称计算模型,基于动网格技术模拟入口压强随喉部面积变化而变化的推力器工作模式,得到了内流场各性能参数的变化规律。结果表明:在非稳态工作过程中,内流场会出现典型的亚音速回流区、斜激波和流动分离等特征,入口压强、针栓壁面及喷管壁面压强均随针栓靠近喉部而增大,推力器推力逐渐上升,实现了推力连续调节。开关频率会加剧针栓前进过程中头部压强波动。针栓头部收敛角越大,其头部回流区越小。当喉部面积一定时,燃速压强指数越高,发动机压强与推力变化范围越大,为实现预设的推力调节范围,需要选择合适的燃速压强指数。     

考虑测量约束的非合作目标近距离快速导引控制方法

研究了考虑测量约束的非合作目标近距离快速导引控制方法。首先,基于C-W方程建立了解析形式的径切联合近距离快速导引控制模型,并采用微分修正方法将解析结果进行修正;然后推导了任意初始条件下,径切联合控制双脉冲与视场角的解析关系;最后基于相对偏心率矢量建立了径切联合控制的控后效果评估模型。仿真结果表明:提出的控制方法和控后效果评估模型有效。     

A novel architecture of electro-hydrostatic actuator with digital distribution

To address the flow imbalance rapidly of the asymmetric Electro-Hydrostatic Actuator (EHA), this paper presents a novel architecture of asymmetric EHA with the Digital Distribution (EHA-DD). It also improves the flow nonlinearity and control accuracy of the pump, especially in the low-speed condition. The digital distribution with two High-Speed on–off Valves (HSVs) not only balances flow instead of the check valves, but also replaces the pump at the low-speed to control output flow by adjusting the PWM signal. The pump and HSVs are the crucial components to control flow output. Firstly, the flow calculation models of the pump and the duty ratio inversed model of the HSV are obtained through experimental tests and the identification method. To get the control input signal for the required flow, the pump speed and PWM duty ratio for the HSVs are inversed to compensate for flow output. Further, a multimode digital flow distribution control method based on pump speed, mainly including the pump-controlled mode for large flow demand and valve-controlled mode for little flow demand, is proposed to control the accurate flow output actively. The step extension experiments based on the flow calculation models are conducted on the EHA-DD prototype under elastic, opposite varying load. The results demonstrate that the EHA-DD realizes little position error by accurate flow control, and it is also beneficial to improve the service life of the pump.     

运载火箭姿控对迭代制导适应性分析的仿真方法研究

首先给出了迭代制导方法,然后建立了姿态动力学全量数学模型,在考虑弹性振动和液体晃动的情况下,进行了制导与姿控系统的六自由度联合仿真.仿真结果表明,在迭代制导实时优化输出程序角的情况下,姿控系统具有良好的跟踪性能;在制导与姿控子系统相互作用的情况下,能够确保制导程序角的收敛和姿态的稳定.