Three-Dimensional Stress Fields in Finite Thickness Plate with Hole Under Shear Load

The theoretical solutions are obtained for the three-dimensional(3-D)stress field in an infinite isotropic elastic plate with a through-the-thickness circular hole subjected to shear load at far field by using Kane and Mindlin′s assumption based on the stress function method.Based on the present solutions,the characteristics of 3-D stress field are analyzed and the emphasis is placed on the effects of the plate thickness and Poisson′s ratio on the deviation of the present 3-D in-plane stress from the related plane stress solutions,the stress concentration and the out-of-plane constraint.The present solutions show that the stress concentration factor reaches its peak value of about 8.9% which is higher than that of the plane stress solutions.As expected,the out-of-plane stress constraint factor can reach 1on the surface of the hole when the plate is a very thick one.     

中国机场业集中度实证研究

借助产业集中度理论和计量方法,根据2003—2010年我国主要机场旅客、货邮吞吐量数据,计算出我国机场业集中度指数(CR4,CR8)。对比美国2009—2010年行业集中度指数,得出结论:我国机场业目前集中垄断程度较高,未来机场业内竞争发展还有很大空间。     

李萨如图在磁记忆二维定量检测中的应用

依据磁记忆二维检测原理,将磁信号法向分量存在过零点,切向分量存在最大值联合起来检测,并引入李萨如图分析法,对用法向分量和切向分量合成的类李萨如图以及将法向分量和切向分量微分后合成的李萨如图进行比较分析,得出可以利用微分后合成的李萨如图封闭区域面积的大小来判断应力集中程度及用在不同的应力集中程度下李萨如图面积数量级作为阈值的结论.从而可为利用李萨如图分析法对磁记忆二维检测进行定量分析的进一步研究提供试验分析依据.     

Different mechanisms controlling interannual phytoplankton variation in the South China Sea and the western North Pacific subtropical gyre: A satellite study

A time series of remotely-sensed chlorophyll a (chl a) in 1997–2010 was evaluated to determine mechanisms of phytoplankton variation in recent decade in the South China Sea (SCS) and the western North Pacific subtropical gyre (WNPSG). Satellite-derived sea surface temperature (SST) and aerosol optical thickness (AOT) were used as proxies for vertical nutrient supply and atmospheric aerosol, respectively. Chl a in the WNPSG was not significantly correlated with SST (r = 0.18, p > 0.05), but was with AOT (r = 0.31, p < 0.05), indicating the chl a was influenced by atmospheric deposition. Chl a in the SCS was negatively correlated with SST (r = −0.60, p < 0.05) and was positively with AOT (r = 0.20, p < 0.05). The correlation between AOT and chl a in the SCS does not reflect a major contribution from atmospheric deposition to chl a; instead, the relationship resulted from concurrence of the peaks of AOT and wind speed, which drive water mixing and nutrient supply. Consequently, chl a in the SCS would be regulated primarily by the nutrient supply from deep waters. Because SST was controlled by the ENSO teleconnection in the SCS, the chl a was coupled with ENSO events. The present study demonstrated that interannual phytoplankton variation could be controlled by different factors even in neighboring oligotrophic regions.     

应用粒子激光散射测量混合反应器分散相浓度场分布

研究了圆管反应器中四束侧向对撞射流与轴向流形成的混合流动.应用激光粒子散射成像测量了侧向分散相在混合流中的浓度场分布,得到了不同的浓度分布图形随侧向流与轴向流速比关系,揭示了内在有规律的独特的浓度分布结构.     

直射式喷孔后方燃油浓度场计算及其分析

由于直射式喷油孔的结构简单、布置和调整方便,因此已被广泛地应用于冲压发动机的燃烧室中,而且喷孔后方的燃油浓度分布对火焰稳定及燃烧效率有很大影响,由此预知喷孔后方燃油浓度分布对喷孔布置、确定喷孔与稳定器的相对位置是十分重要的。根据试验结果,推导得到了直射式喷孔后方燃油浓度分布的计算公式,编制燃油浓度分布的计算程序,以分析直射式喷油孔后方的燃油浓度场分布。     

产业集中度与产业盈利水平关系的研究

基于经济学演化范式的观点和产业的复杂适应系统特征，构建了以目标产业为核心的产业供求关系网络分析框架。在回顾以往产业集中度与利润率关系的研究成果的基础上，利用国内消费类产业集中度与毛利率的相关系数分析，对以往研究结论做了进一步印证。在此基础上，基于对产业供求关系网络的认识，提出将产业集中度与产业盈利水平关系的研究，从目标产业本身扩展到与其密切相关的上下游产业，深入分析产业间集中度差异对产业盈利水平产生的影响。     

Erosion degradation characteristics of a linear electro-hydrostatic actuator under a high-frequency turbulent flow field

The paper proposes a performance degradation analysis model based on dynamic erosion wear for a novel Linear Electro-Hydrostatic Actuator (LEHA). Rather than the traditional statistical methods based on degradation data, the method proposed in this paper firstly analyzes the dominant progressive failure mode of the LEHA based on the working principle and working conditions of the LEHA. The Computational Fluid Dynamics (CFD) method, combining the turbulent theory and the micro erosion principle, is used to establish an erosion model of the rectification mechanism. The erosion rates for different port openings, under a time-varying flow field, are obtained. The piecewise linearization method is applied to update the concentration of contaminated particles within the LEHA, in order to gain insight into the erosion degradation process at various stages of degradation. The main contribution of the proposed model is the application of the dynamic concentration of contamination particles in erosion analysis of Electro-Hydraulic Servo Valves (EHSVs), throttle valves, spool valves, and needle valves. The effects of system parameters and working conditions on component wear are analyzed by simulations. The results of the proposed model match the expected degradation process.     

剥蚀对含孔试件疲劳寿命影响研究

剥蚀是影响老龄飞机结构完整性的重要因素之一。本文对LY12CZ铝合金含孔试件进行了预剥蚀疲劳试验,试验结果表明剥蚀使疲劳寿命下降,但其与剥蚀程度并不成正比。运用MSC.Marc中的单元"软化"技术模拟了剥蚀对试件应力分布影响,结果表明最大主应力不但与腐蚀深度有关,还与腐蚀形貌和位置有关。最后基于材料的初始不连续状态(initial discontinuity state,IDS),建立了评估剥蚀对含孔试件疲劳寿命影响的模型。预测值与试验结果比较表明,该模型预测结果精确,方法可靠。     

TA15钛合金薄板等离子弧对接焊缝疲劳特性研究

为了探索钛合金等离子弧焊接头的疲劳性能,本文依据TA15标准试件和轧制板材试件疲劳试验数据处理结果,采用当量应力集中系数法,在TA15薄板等离子弧焊和对接焊缝磨削组合工艺试件的疲劳试验基础上,确定了中值当量应力集中系数和安全当量应力集中系数,最后建立了该TA15薄板的S-N曲线,给出了应用结论。