微小推力下小卫星的轨道递推与推力标定

针对采用微小推力进行轨道机动的小卫星,考虑复杂摄动力的基础设计了一种高精度轨道外推和推力在轨标定算法.首先,建立了考虑地球复杂摄动力和微小推力的小卫星轨道动力学模型;然后基于动力学模型,利用变步长龙格库塔算法,设计了对微小推力小卫星进行高精度轨道外推的方法.随后通过无迹卡尔曼滤波器(UKF),设计在轨标定算法,对存在误...     

Parametric analyses for synthetic jet control on separation and stall over rotor airfoil

Numerical simulations are performed to investigate the effects of synthetic jet control on separation and stall over rotor airfoils. The preconditioned and unsteady Reynolds-averaged Navier–Stokes equations coupled with a k x shear stream transport turbulence model are employed to accomplish the flowfield simulation of rotor airfoils under jet control. Additionally,a velocity boundary condition modeled by a sinusoidal function is developed to fulfill the perturbation effect of periodic jets. The validity of the present CFD procedure is evaluated by the simulated results of an isolated synthetic jet and the jet control case for airfoil NACA0015. Then, parametric analyses are conducted specifically for an OA213 rotor airfoil to investigate the effects of jet parameters(forcing frequency, jet location and momentum coefficient, jet direction, and distribution of jet arrays) on the control effect of the aerodynamic characteristics of a rotor airfoil. Preliminary results indicate that the efficiency of jet control can be improved with specific frequencies(the best lift-drag ratio at F+= 2.0) and jet angles(40 or 75) when the jets are located near the separation point of the rotor airfoil. Furthermore, as a result of a suitable combination of jet arrays, the lift coefficient of the airfoil can be improved by nearly 100%, and the corresponding drag coefficient decreased by26.5% in comparison with the single point control case.     

ANALYSIS OF AN ELECTROSTRICTIVE STACK ACTUATOR FOR ACTIVE TRAILING EDGE FLAPS

Helicopter is a complex dynamic system withmany rotating components. The rotor blades oper-ate in a highly complex aerodynamic environment.The vibratory hub load,which is caused by cyclicvariation ofcentrifugaland aerodynamic load of therotating bladesin flight,is transmitted to the fuse-lage,resulting in serious vibration and noise of thestructure. It is one of the most important excitingsources in helicopters.There has long been a desire to reduce heli-copter vibration and to improve its per…     

面向21世纪的纳米机械学

本文对纳米机械学的发展历程、定义、特点、研究内容和方向进行了简介.     

EXPERIMENTAL STUDY OF FLOW FIELDS IN THE VICINITY OF A FILM COOLING HOLE EXIT

Sofar,filmcoolingisextensivelyadoptedforprotectinghightemperaturepartsingasturbine.Manyresearchworksarefocusedonflow[1~3Jandheattransfer[4'5jinthedownstreamofthecircularhole,buttheflowcharacteristicsattheholeexit,especiallyforflaredholeexit,arenotreportedatpresent.Inordertodesignasuitab1eholeshapeforpracticalcoolingandprovideplentyexperimentaldataforverificationofcomputercodes,adetai1edexperimentalin-vestigationabout3-Dflowfieldsattheexitofasinglecircularandfan-shapedholehasbeencompleted.1Exp…     

微压力校准装置测量不确定度分析

介绍了微压力校准装置的工作原理,并对该校准装置在表压模式下工作时的测量不确定度进行了分析评定.     

液相先驱体转化法制备ZrC粉末及合成机理

以氯氧化锆、丙醇、丙三醇和乙酰丙酮等为基本原料合成了锆的有机先驱体溶液,采用液相先驱体转化法在1 500℃制备了ZrC粉末。运用FTIR对锆的先驱体溶液的组成、结构以及形成机理进行了分析,用XRD和EDS分析了粉末的形成机理,用SEM观察了粉末的形貌。结果表明,有机锆的先驱体溶液具有螯和的链状或网状结构;先驱体溶液干燥后的粉末呈蜂窝状结构,在不同热处理温度下获得面心立方的ZrC粉末。经过热力学计算结果表明,C还原锆的氧化物开始生成ZrC的最低温度为1594℃,实验温度低于理论温度,在1500℃时获得面心立方的ZrC材料。     

有翼高超声速再入飞行器气动设计难点问题

有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。     

柔性扑翼气动结构耦合特性数值研究

微型扑翼体积小、重量轻,其柔性变形对气动特性有显著的影响。通过求解雷诺平均N-S方程(ReynoldsAveraged Navier-Stokes,RANS)和结构动力学方程,对微型柔性扑翼飞行器的气动结构耦合特性进行了数值模拟研究。针对微型扑翼的大幅运动,发展了适用于扑翼的气动结构耦合数值计算方法,研究了微型扑翼的气动结构耦合特性。通过求解雷诺平均Navier-Stokes(RANS)方程得到微型扑翼的非定常气动特性;利用哈密顿原理(Hamilton Principle)推导了扑翼的结构动力学方程,采用结构有限元方法对该动力学方程进行离散并求解,得到扑翼的动态结构特性;采用松耦合方法进行迭代。计算结果与风洞实验结果相比吻合良好,验证了所发展方法的有效性。在此基础上研究了惯性力和关键运动参数对柔性扑翼气动及结构特性的影响规律,有助于比较详细、全面地了解微型扑翼的气动机理,为柔性扑翼的设计提供了参考依据。     

基于杂波对消-自聚焦的多通道SAR-GMTI

对超高频(UHF)波段多通道合成孔径雷达(SAR)动目标检测技术进行研究,解决了长相干积累时间导致动目标在方位向散焦严重的问题。采用分块自聚焦技术对多通道SAR地面移动目标指示(GMTI)系统自适应杂波抑制后的SAR图像进行处理,改善杂波抑制后的SAR图像中动目标的聚焦情况,增强动目标与周围剩余杂波的对比度,进而提高恒虚警率(CFAR)检测的性能。与传统杂波抑制后直接进行CFAR检测方法相比较,该方法降低了检测虚警概率。实测数据处理结果显示动目标的信杂比明显提高,动目标方位向聚焦成功,证明了该方法的有效性。