氧换热器在两相流条件下的压力脉动机理分析

氢氧液体火箭发动机氧换热器在研制过程中出现了压力脉动现象,影响了换热器的正常工作.以该型换热器为研究对象,将换热器分为燃气侧、汇总管、圆管等结构,进行了CFD仿真计算,与试验结果对比,修正了传热相关参数,建立了换热器理论计算模型用于参数计算;利用非线性方法分析试验数据,确定了该换热器为混沌系统;利用两相流分析与电路类比...     

高压涡轮导向器扇形叶栅试验研究

本文介绍了国内首次在平面叶栅风洞上进行的涡轮导向器扇形叶栅的试验方法和试验结果。扇形段由五个真实的高压涡轮导向叶片组成。试验中通过调整扇形段出13凸块的高度,可以获得满足要求的径向压力梯度。试验结果表明：该涡轮导向器扇形段叶栅在M2h≤1．05时,叶中截面处在带冷气和不带冷气时出口气流参数周向分布较均匀,周期性较好：在设计状态下．带冷气和不带冷气时靠近叶中的几个截面的出口气流参数沿径向的分布变化很小。     

激光驱动微小碎片技术可行性研究试验

文章介绍了激光驱动微小碎片技术的可行性研究试验.试验中,对4种粘膜方法进行了比较,在真空中测出了铝飞片的速度,并进行了两种防护材料的损伤评估.试验结果说明:在地面建立一套完整激光驱动微小碎片模拟装置不但必要,并且是可行的.     

A novel temperature-compensation method based on correlation analysis for multi-FOG INS

Aimed at improving the bias stability of Fiber-Optic Gyroscope (FOG)-based inertial navigation systems in environments of various ambient temperatures, a novel temperature-compensation method based on a correlation analysis of the same batch of FOGs is proposed. The empirical mode decomposition method was employed to filter the high-frequency noises of the FOGs. Then, the correlation information of the multiple FOGs was used to analyze the feasibility of the method. Eventually, the same residual error of the FOGs was compensated via the simple piecewise linear models. The experimental results indicate that excellent compensation effects for both high- and low-accuracy FOGs are achieved using the proposed method. Specifically, the accuracies of high-accuracy FOGs are improved by approximately 33.9%, 20%, and 31.2%, while those of low-accuracy FOGs are improved by approximately 39.1%, 20.8%, and 26.1%. The method exhibits the merits of simplicity, validity, and stability, and thus is expected to be widely used in engineering applications.     

Boundary of nighttime ozone chemical equilibrium in the mesopause region: Improved criterion of determining the boundary from satellite data

A modified derivation of the criterion of nighttime ozone chemical equilibrium (NOCE) in the mesopause region is presented. According to 3D model calculations, the improved criterion reproduces the lower boundary of the equilibrium much better than its earlier version. Processing of the SABER/TIMED data of 2021 has shown that the modified criterion elevates the NOCE boundary by ～ 0.1–1.7 km, depending on latitude and season. The proposed method of determining the condition of chemical equilibrium can be used to analyse the equilibrium of many trace gases in the stratosphere and troposphere important for different practical applications.     

Passive attitude stabilization of ionic-wind-powered micro air vehicles

The ionic-wind-powered Micro Air Vehicles (MAVs) can achieve a higher thrust-to-weight ratio than other MAVs. However, this kind of MAV has not yet achieved controlled flight because of the unstable thrust produced by the ionic wind and the dynamic instability related to the small size. In this paper, a passive attitude stabilization method of the ionic-wind-powered MAV using air dampers is introduced. The key factors that influence the performance of the air dampers, including the layout, position, and area of the air dampers, are theoretically studied. The appropriate optimal position of the air dampers is also obtained by Monte Carlo stochastic simulations. Then the proposed passive attitude stabilization method is applied to the ionic-wind-powered MAVs of different wingspan (2 cm and 6.3 cm). Finally, the experimental results show that using the proposed method, attitude stabilization is achieved for the first time for the ionic-wind-powered MAV. Moreover, the altitude control of an ionic-wind-powered MAV with a wingspan of 6.3 cm is also demonstrated.     

Influence and experiment of cable-net manufacturing errors on surface accuracy of mesh reflector antennas

Cable-net structures are of substantial importance in the construction of large mesh reflector antennas. Owing to the inevitable errors in their manufacturing process, the reflector surface accuracy deteriorates. This study makes a comprehensive investigation of random manufacturing errors during constructing the mesh reflector antennas, and analyze its influence on reflector surface accuracy. Firstly, the sensitivity of reflector surface accuracy with respect to the random errors of the unstressed cable length is mathematically deducted. Secondly, a non-button connecting method is proposed and analyzed to reduce manufacturing errors. Thirdly, two physical experiment models based on 2.62-meter mesh reflector antenna are made. Finally, numerical examples and experimental tests are given to demonstrate the effectiveness of the proposed method. Compared with the traditional method, the proposed method can effectively reduce the influence of the manufacturing errors on the reflector surface accuracy. Moreover, the reduction in the sizes of the nodes also reduces the risk of entanglement of the mesh reflector antenna during the deployment process, and thereby improves the deployment reliability.     

一种基于实测点云数据的壁板类零件修配加工路径计算方法

针对飞机壁板类零件采用修配法装配过程中需要精确获取修配加工路径的问题，提出一种基于实测点云数据的壁板类零件修配加工路径计算方法。首先设计一种基于法线差的特征点检测算法提取参考壁板的初始特征点。然后建立迭代收缩优化模型对初始特征点进行收缩优化，得到参考壁板的准确特征点。最后根据工装定位孔特征进行配准，将参考壁板的特征点映射到待修配壁板上，并将映射后的特征点按照一定顺序进行连接，得到待修配壁板的修配加工路径，按照修配路径进行加工，获得壁板装配配合边界。实验表明，该方法能够精确提取待修配壁板修配加工路径，并且经过加工验证，壁板试验件对缝间隙获得小于1.2 mm的实际效果。     

Optimization for aerodynamic performance of double serpentine nozzles with spanwise offsets using Taguchi-based CFD analysis

Serpentine nozzles are widely used in combat aircraft to realize strong stealth characteristics. Based on the layout characteristics within a confined space, a series of double serpentine nozzles with spanwise offsets are established. Using computational fluid dynamics and Taguchi method, the influence mechanisms of the Distribution of Area (DA), Distributions of Centerline for the first and second ‘S’ sections in the Vertical direction (DCV1 and DCV2), and Distribution of Centerline in the Spanwise direction (DCS) are analyzed. The impact of these factors on the total pressure recovery coefficient can be ranked as DA > DCV2 > DCS > DCV1, whereas their impacts on the discharge coefficient and axial thrust coefficient can be ranked as DCV2 > DCS > DA > DCV1. Considering the statistical significance of these factors, a nozzle in which DA changes rapidly at the exit and DCV1, DCV2, and DCS change rapidly at the entrance gives the best aerodynamic performance. Compared to the worst configuration, the total pressure recovery coefficient, discharge coefficient, and axial thrust coefficient are improved by 1.6%,3.5% and 3.6%, respectively. DA influences the gas flow acceleration in the entire serpentine channel, resulting in different wall shear stress and friction losses. The various centerline distributions influence the gas flow acceleration effects and form complex wave structures in the constant-area extension section, resulting in different local and friction losses.     

高熵陶瓷研究进展

高熵陶瓷是一类新兴的陶瓷材料,因其独特的结构和性能,近年来受到广泛的关注.本文从高熵陶瓷的定义出发,通过概述固相反应法、前驱体热解法以及放电等离子烧结法等高熵陶瓷制备方法,介绍了合成高熵陶瓷的工艺流程;并且详细阐述了近年来高熵氧化物、高熵碳化物、高熵二硼化物等体系的高熵陶瓷的研究成果,对不同体系的高熵陶瓷的特点和应用前...