基于摄影测量技术的航天发动机装配过程几何参数测量方法研究

当前我国航天发动机装配过程几何参数的测量方法为专业人员操作激光跟踪仪或全站仪逐点位进行测量,此类方法存在测量效率低的缺点。针对此问题,提出了一种高效的基于摄影测量技术的航天发动机装配过程几何参数测量方法,对该测量方法的测量原理进行了介绍,详细说明了这一方法各测量环节实现的测量目的,最后通过实测数据计算工业数字摄影测量技术在此类应用中的系统准确度,证明了该测量方法的可行性。     

基于数值模拟的超塑成形压力—时间曲线计算机辅助设计

确定压力随时间变化的关系曲线对于超塑成形工艺设计非常重要,本文在超塑成形压力计算时引入能量消耗控制策略,提出了一种压力－时间（Ｐ－Ｔ）曲线设计方法即恒能耗率法,实现了基于有际元数值模拟的超塑成形Ｐ－Ｔ曲线计算机辅助设计,文中对有关的压力控制算法及算式进行了较详细的介绍和推导,分别给出了半球壳自由胀形和圆筒形凹模约束成形过程的Ｐ－Ｔ曲线设计计算实例,并对计算结果进行了讨论,本文的研究拓宽了刚粘塑性有     

非恒定增压式微尺度拉瓦尔喷管流动特性

针对微尺度喷流在航天器运动状态切换时出现的非恒定增压变化,采用直接模拟蒙特卡洛(DSMC)方法对阶跃式增压和线性式增压两种模式下的微尺度拉瓦尔喷管流场进行了模拟,并对其变化过程中的流动特性进行了对比分析。结果显示：阶跃式增压会导致流动特性出现较大幅值的峰谷式波动,而线性式增压下的流动特性则呈现出线性变化的特点;黏性力对微尺度喷流的非恒定增压变化产生了重要的黏滞作用,在喉部扩张段至出口的流场中尤为明显;在设定的条件下,阶跃式增压过程中喷流产生的总冲量较线性式增压高59.5%,质量流量高74.7%,单位工质提供的冲量低约8.6%,波动性也高于线性式模型,阶跃式增压适用于系统需要较大推力改变运动状态且推进剂充足的情况,而线性式增压在系统精确微调或需要推进剂产生更高效能时具有明显的优势。     

多芯片组件（MCM）用金锡焊带材料电阻率及热导率温度特性研究

对牌号为Au₈₀Sn₂₀的金锡焊带材料在208~423 K的电阻率及热导率与温度的函数关系进行了研究,并对其在多芯片组件（MCM）中的传热效果进行了评估。分别对材料在208~423 K中5个温度点的电阻率及4个温度点的热导率进行了测试,基于理论模型建立电阻率/热导率随温度变化的函数关系,最终采用模拟热扩散数值方法评估材料在高温下的传热能力。结果表明,采用修正函数模型后,金锡焊带材料在208~423 K下热导率与电阻率的关系符合测试结果,随芯片表面温度的边界条件从208 K升高至423 K,采用变温热导率模型得到的热流密度模拟计算结果相比理想化恒定热导率模型的差异性逐渐升高至5.5%。综上,金锡焊带材料热导率与电阻率的关系符合Wiedemann-Franz法则修正后的Smith-Palmer方程,在该材料传热设计时应考虑其热导率温度效应。     

基于电阻法的工艺液位传感器测量系统及其校准装置的研制

介绍了一种基于电阻法的工艺液位传感器测量系统的设计与实现,该传感器测量系统包括利用液位传感器、点式液位传感器、耗尽关机液位传感器与剩余液位传感器及对应的变送器。设计了相应的半自动校准系统对传感器的精度进行标定,分析了测量结果的不确定度。经过测试,所有传感器各项指标均满足设计要求。该传感器的研制解决了现有容积计量及液压试验系统不能对贮箱各不同部位进行容积和高度监测的问题。     

Effects of yaw-roll coupling ratio on lateral-directional aerodynamic characteristics

Experimental investigation of large amplitude yaw-roll coupled oscillations was conducted in a low-speed wind tunnel using an aircraft configuration model. A special test rig was designed and constructed to provide different coupled motions from low to high angles of attack.A parameter ‘‘coupling ratio" was introduced to indicate the extent of yaw-roll coupling. At each pitch angle, seven coupling ratios were designed to study the yaw-roll coupling effects on the lateraldirectional aerodynamic characteristics systematically. At high angles of attack, the damping characteristics of yawing and rolling moments drastically varied with coupling ratios. In the coupled motions with the rotation taking place about the wind axis, the lateral-directional aerodynamic moments exhibited unsteady characteristics and were different from the ‘‘quasi-steady" results of the rotary balance tests. The calculated results of the traditional aerodynamic derivative method were also compared with the experimental data. At low and very high angles of attack, the aerodynamic derivative method was applicative. However, within a wide range of angles of attack, the calculated results of aerodynamic derivative method were inconsistent with the experimental data, due to the drastic changes of damping characteristics of lateral-directional aerodynamic moments with yaw-roll coupling ratios.     

插入式机翼下壁板对接附加弯矩研究

插入式机翼下壁板对接具有双剪传力稳定、疲劳性能好的优点,但其结构中心线在对接区变化明显,会带来附加弯矩。为尽量减小对接区的附加弯矩,提出了在建立飞机骨架模型时即优化中央翼下翼面外形面相对外翼下翼面的位置方法。基于插入式机翼下壁板对接结构的特点,阐述了对接结构偏心的来源和附加弯矩的形成;针对某A型飞机的对接结构计算了偏心值,并利用力法对附加弯矩在对接区的分布进行了计算分析。以某A型飞机的对接结构为基础,建立了4组插入式下壁板对接结构的模型,每组模型的中央翼下翼面位置相对外翼的不同;分别用力法和有限元法对附加弯矩进行了计算。结果表明：可以通过优化中央翼下翼面外形面的相对位置达到减小对接区附加弯矩的目的。描述了另外两种下壁板对接形式的附加弯矩情况,并和插入式的进行了简单比较。最后,总结了为减小区域附加弯矩及其不利影响在对接结构设计上需要注意的点。     

蜂窝状薄壁管拉伸时的内陷分析

蜂窝材料因具备广阔的结构设计空间,已广泛应用于航空航天等工业领域。探索蜂窝元胞的组织结构、组分性质与材料整体性能之间的关系有助于新型功能性材料的设计开发。本文从非平面Vertex模型的势能形式出发,结合蜂窝薄壁圆管拉伸时的轴对称特征,通过变分法得到了圆管拉伸时母线满足的控制方程,揭示了边界效应是蜂窝状薄壁圆管受拉时产生内陷的原因,并结合母线控制方程的若干特解,考察了非平面Vertex模型势能形式中包含的材料性质参数与圆管拉伸后内陷程度及范围的关系。研究还指出,蜂窝材料的材料性质包含在非平面Vertex模型的势能形式中,为蜂窝状材料整体性能的研究提供了一种新的思路。     

Mean energy of response to galactic cosmic ray spectrum: IMP 8 and Climax neutron monitor

Solar modulations of galactic cosmic ray (GCR) intensity contain a wealth of information about their transport in the heliosphere. To extract this information from the data one studies the dependence of the observed modulations on the mean energy of response of detectors providing data for the analyses. There is a great deal of confusion about the detector energy response to GCR spectrum in the literature. We present a preliminary report on the computations of the mean energy of response for the Climax neutron monitor (CL/NM) and IMP 8 cosmic ray nuclear composition instrument to GCR protons for 1973–1998, covering the solar cycles 21 and 22. We find that for penetrating proton channel on IMP 8 the mean energy changes by a factor of over two whereas for the neutron monitor the change is only 21%. However, the corresponding change for the computed modulation function is a factor of about 3.5.     

Remote upgrading of a space-borne instrument

The main purposes of experiment “Obstanovka” (“Environment” in Russian) consisting of several instruments are to measure a set of electromagnetic and plasma phenomena characterizing the space weather conditions, and to evaluate how such a big and highly energy consuming body as the International Space Station disturbs the surrounding plasma, and how the station itself is charged due to the operation of so many instruments, solar batteries, life supporting devices, etc. Two identical Langmuir electrostatic probes are included in the experiment “Obstanovka”. In this paper the Langmuir probes for “Obstanovka” experiment are described, including the choice of geometry (spherical or cylindrical), a more reliable method for the sweep voltage generation, an adaptive algorithm for the probe’s operation. Special attention is paid to the possibility for remote upgrading of the instrument from the ground using the standard communication channels.