Factor graph based navigation and positioning for control system design: A review

Navigation and positioning is an important and challenging problem in many control engineering applications. It provides feedback information to design controllers for systems. In this paper, a bibliographical review on factor graph based navigation and positioning is presented. More specifically, the sensor modeling, the factor graph optimization methods, and the topology factor based cooperative localization are reviewed. The navigation and positioning methods via factor graph are considered a...     

Y7-200A飞机自然结冰飞行试验

介绍了Ｙ７－２００Ａ飞机防冰除冰系统,自然结冰飞行试验所需气象专用设备和机场气象条件的选择以及自然结冰的飞行安全。同时还介绍了飞行试验的内容、试验方法及试验结果,并对试验结果进行了分析,试飞结果表明,带自然积冰飞机性能比带模拟冰型的好,自然结冰试验与模拟冰型试验之间的飞机操纵特性没有不可接受的差异,飞机飞行品质良好。可供运输类飞机自然结冰飞行试验时参考。     

静止气象卫星资料接收与处理

分析了GMS卫星展宽数字资料接收和处理特点,叙述了开发的展宽数字资料接收系统以及三种不同规模处理系统(实时图像处理系统、微机处理系统和大型计算机处理系统)的组成和功能。     

考虑高斯能量分布的复杂表面航天器激光雷达散射特性分析

针对复杂表面航天器在激光雷达照射下散射特性模拟不准的问题,通过表面建模和激光特性修正进行了解决。该方法首先通过高斯能量分布法对激光光束模型进行修正;然后基于有限元的思想,针对航天器复杂表面非光滑、非连续以及多材质等特性,利用改进Z-buffer的消隐算法解决了复杂航天器表面建模问题;最后建立了面向激光雷达的复杂表面航天器激光雷达散射截面的计算方法。仿真分析表明:航天器不同姿态下的激光雷达散射截面精度提升了14.58%,为后续面向激光雷达的隐身设计奠定了基础。     

超大口径环形天线包带展开过程动力学仿真

中间柔性包带是环形可展开天线的重要组成部分。中间包带拔销器解锁后,复材包带与环形桁架同步展开。因复材包带柔性较强,它会绕根部固定端进行回弹,因此展开过程存在金属接头和桁架上复材薄壁管件碰撞风险。随着天线口径增大,该风险会持续增大。基于柔性多体动力学理论对超大型口径环形可展开天线包带展开过程进行动力学建模仿真,并在此基础上分析得出包带展开过程金属接头到环形桁架最小距离主要和复材包带阻尼率以及桁架预展速度相关。通过进一步研究发现：复材包带阻尼率越高,展开过程金属接头到环形桁架最小距离越大;桁架预展速度越快,展开过程金属接头到环形桁架最小距离越小。此外,对逆止回弹机构失效这一在轨极端条件下包带展开过程进行建模仿真,分析得出包带在该条件下展开过程金属接头到环形桁架最小距离变化规律。该研究可为超大口径环形天线结构优化设计及包带在轨展开预示提供依据。     

基于3DS MAX模型的无人直升机实时监控系统三维建模

分析OpenGL中三维建模的主要方法,结合共轴式无人直升机实时监控飞行系统的设计需要,得出利用3DS MAX的输出模型进行三维建模可以大大提高效率。分析3DS MAX主要输出文件的结构,指出OpenGL建模所需的要素。设计并实现了3DS MAX到OpenGL的模型转换模块,能够分离出3DS MAX场景中的三维模型,为在实时监控系统中再现3DS模型并构造监控飞行系统的三维场景提供灵活性。     

整级环境下涡轮叶片型面加工几何偏差影响的不确定性分析

加工等过程中产生的几何偏差会导致涡轮叶片气动性能及工作状态发生显著变化,对该影响的准确评估与合理分析具有重要意义.本文提出了一种考虑三维型面几何偏差对气动性能影响的不确定性计算分析方法,包括随机叶型几何建模、不确定性量化计算和敏感性分析等,并结合某一单级高压涡轮进行分析.基于随机过程理论和主成分分析法,参考现有叶片加工...     

折叠机翼变体飞机非对称变形控制效率分析

折叠机翼变体飞机变形量大,变形引起的气动参数变化显著,提出一种将非对称变形作为操纵输入的控制方案,研究非对称变形的控制效率和有效区间。首先建立能够完整描述变形过程的非线性动力学方程和气动力模型;然后基于非对称变形控制方法建立一种非对称变形操纵模型;最后通过与常规操纵面效率对比和仿真的动态响应总结出非对称变形操纵的最大变形操纵有效区间。结果表明:在较低飞行速度下非对称变形操纵效率高,非对称变形操纵能够在基准折叠角度90°附近提供最高的滚转操纵效率。     

Modeling and control for cooperative transport of a slung fluid container using quadrotors

In this paper, dynamic modeling and control problem for transfer of a sloshing liquid container suspended through rigid massless links from a team of quadrotors are investigated. By the proposed solution, pose of the slung container and fluid sloshing modes are stabilized appropriately. Dynamics of the container-liquid-quadrotors system is modeled by Euler-Lagrange method. Fluid slosh dynamics is included using multi-mass-spring model. According to derived model, a proper control law is designed for a system with three or more quadrotors. Implementing the proposed control law, quadrotors can control pose of the container, directions of the links and liquid sloshing modes simultaneously. Stability of closed loop system of tracking errors and sloshing modes are demonstrated using a theory of singularly perturbed systems and Lyapunov stability theorem. Also, the capability of the proposed feedback control laws in solving a formerly organized transport problem of a liquid filled container has been demonstrated in simulations. Moreover, priority of the proposed control scheme to an existing slung load controller in the literature is demonstrated.     

Modeling and experimental validation of sawing based lander anchoring and sampling methods for asteroid exploration

This paper presents a novel lander anchoring system based on sawing method for asteroid exploration. The system is composed of three robotic arms, three cutting discs, and a control system. The discs mounted at the end of the arms are able to penetrate into the rock surface of asteroids. After the discs cut into the rock surface, the self-locking function of the arms provides forces to fix the lander on the surface. Modeling, trajectory planning, simulations, mechanism design, and prototype fabrication of the anchoring system are discussed, respectively. The performances of the system are tested on different kinds of rocks, at different sawing angles, locations, and speeds. Results show that the system can cut 15?mm deep into granite rock in 180?s at sawing angle of 60°, with the average power of 58.41?W, and the “weight on bit” (WOB) of 8.637?N. The 7.8?kg anchoring system is capable of providing omni-directional anchoring forces, at least 225?N normal and 157?N tangent to the surface of the rock. The system has the advantages of low-weight, low energy consumption and balance forces, high anchoring efficiency and reliability, and could enable the lander to move and sample or assist astronauts and robots in walking and sampling on asteroids.