强激光辐照下充压壳体损伤特征温度分析

提出了损伤特征温度的理论表述,该物理量表征的是材料结构达到强度极限时的温升大小,同时其对应的是壳体出现开裂损伤时满足的最低能量条件。通过建立有限元模型,给出了激光加载下损伤特征温度的计算方法及结果,对加载功率密度和内压的影响关系进行了讨论,并预估了不同功率密度加载时壳体的损伤时间。结合数值模拟结果,开展了相关试验研究,并进行了讨论。研究表明,激光功率密度和壳体内压对损伤特征温度有不同的影响关系,该物理量对试验设计具有重要参考价值。     

含Ti钎料钎焊碳纤维复合材料与钛合金的界面微观分析

采用几种钎料对碳纤维复合材料与钛合金进行真空钎焊,重点探讨了含Ti钎料钎焊碳纤维复合材料与钛合金连接界面的微观组织。研究表明,含Ti钎料润湿连接碳纤维复合材料与钛合金TC4的过程可分为五个阶段:钎料与母材的物理接触以及钎料的熔化;原子的扩散;反应层的生成;反应层沉积变厚,润湿复合材料;形成接头。研究结果对于碳纤维复合材料与钛合金的连接及在重要航天器中的应用具有重要参考价值。     

压力对膜盒式端面密封平衡直径的影响

膜盒式端面密封在低温液体火箭发动机涡轮泵中有着广泛的应用,作为直接影响密封工作稳定性及涡轮泵工作可靠性的重要参数,端面比压、膜盒平衡直径等如何选取一直是密封设计的重要工作.以某型低温液体火箭发动机涡轮泵的膜盒式端面密封为研究对象,研究压缩量、工作压力对膜盒应力分布、平衡直径、载荷系数和端面比压的影响.应用有限元法建立了...     

金属任意腐蚀损伤量的日历寿命计算模型和曲线

国际机械日历寿命研究,都是在假设已知腐蚀损伤容限Dc的前提下,求在这个Dc下的金属日历寿命。为了便于应用,本文不再假设腐蚀损伤容限Dc为已知数,而是把Dc当做变量,求金属任意腐蚀损伤量Di的日历寿命。本文通过多方面深入研究,发现腐蚀试验溶液的浓度dt与试验时间Ht的乘积除以试验获得的腐蚀损伤Dt等于一个常数。由此给出一种简单易行的金属任意腐蚀损伤量日历寿命的计算模型和相应的求解曲线。由此模型或曲线,可求得金属任意腐蚀损伤量的日历寿命。     

金属膜盘联轴器轴向振动特性研究

为研究金属膜盘联轴器的轴向振动特性,分别通过有限元计算和试验方法分析了金属膜盘联轴器的轴向拉伸刚度、轴向压缩刚度和轴向固有频率。根据分析结果,对某型膜盘联轴器开展了在运转条件下的轴向振动测试。结果表明:金属膜盘联轴器的轴向拉伸刚度和压缩刚度均呈现明显的非线性特性。在某型联轴器的工作转速范围内存在轴向振动固有频率,但仅在使用转速激励,且在联轴器的轴向固有频率下运转,联轴器才不会发生轴向共振。     

MDS图在液态模锻工艺过程单片机仿真控制系统中的应用

本文介绍了液态模锻工艺过程单片机仿真控制系统的设计方法，包括液态模锻工艺程确立、逻辑量确立、硬件系统设计、ＭＤＳ图的建立及软件实现，在工艺设备的逻辑性控制中应用ＭＤＳ图控制结构设计的控制器可方便方便地实现ＰＬＣ的控制功能，也可主便地实现其他娄字逻辑系统的控制功能。     

致密金属零件的激光近形制造

介绍了激光近形制造系统的组成,分析了该技术的特点和应用场合,指出了目前存在的问题和解决办法.     

Implication of multiple dipolarization event near 9 RE for the physics of substorms

In 2001, 2002 and 2003, the Polar spacecraft probed the near equatorial plasma sheet at 9 R_E near local midnight. Using the magnetic field observations, the signatures at substorm onsets are studied. Close to the flux pile-up region, the Polar spacecraft readily detects the dipolarization front, especially for pseudo onsets. An event with two distinct onsets has been examined. The signatures are found to be consistent with the multiple-onset model suggested by Russell [Russell, C.T. How northward turnings of the IMF can lead to substorm expansion onsets. Geophys. Res. Lett. 27, 3257–3259, 2000] which is a modified Near-Earth Neutral Line (NENL) model. Another similar event is also examined showing the effects of different Interplanetary Magnetic Field (IMF) conditions upon substorms. Moreover, ground effects can be very weak compared to in situ observations, especially for pseudo onsets, because these signatures appear to be localized and not global.     

Mathematical description of the NaK model for MASTER-2005

The release of NaK droplets has been modeled for the new version of the European Meteoroid and Space Debris Terrestrial Environment Reference model MASTER-2005. Previously published versions of the model have been revised. The parameters of the model are introduced and discussed. NaK droplets consist of eutectic sodium–potassium alloy and have been released during RORSAT reactor core ejections. They contributed to the space debris environment in the centimeter and millimeter size regime. Sixteen nuclear powered RORSATs launched between 1980 and 1988 activated a reactor core ejection system in Sufficiently High Orbits (SHO), mostly between 900 and 950 km altitude. The core ejection caused an opening of the primary coolant circuit. The liquid coolant has been released into space during these core ejections. The outflow is considered as a discrete event for each of the sixteen core ejections in total. The NaK coolant has been forming droplets up to a diameter of 5.5 cm. NaK releases are restricted to a very narrow region near 65° inclination. This paper gives the parameters of the NaK release model as it is implemented in MASTER-2005. The quantitative values of all model parameters including characteristic diameter and uniformity parameter are presented. The ratio of the characteristic droplet size to the orifice diameter is discussed. It is estimated that altogether 128 kg of NaK-78 (8 kg per RORSAT) was released on orbit. Simulation runs show that there are still 45,000 droplets with a total mass of 97 kg in orbit at the reference epoch 1 May 2005, whereas the smallest droplet has a diameter of 5 mm. Results of orbit propagation simulation runs are presented in terms of spatial density.     

嵌金属丝推进剂燃烧起始阶段增速特性研究

考虑了使用嵌金属丝装药的发动机工作过程中的多种因素,建立了金属丝与药柱、燃气间相互作用的控制方程组,并对方程组进行了数值求解,得到了嵌金属丝推进剂在燃烧起始阶段,增速比随时间的详细变化过程。结果表明,金属丝的热扩散率、熔点、直径和黑度以各自不同的方式影响金属丝的增速效果,熔点相对较低的金属丝可能会在内弹道曲线的初始阶段形成一个轻微的压强峰,固有燃速较低、着火温度较低的推进剂对嵌入金属丝较为敏感。文中数值方法计算量小,结果可靠,适于工程应用。